X88 Pro X3 - Flash Issues

[Encode1222]

Hi, i cannot upgrade the firmware on the X88 Pro x3 box.

Getting this error: [0x10103003]Romcode/Initialize DDR/Download buffer/USB transfer error

I can fine upgrade other boxes

Anyone know how to fix this?

Logfile:

[10:26:21 791][HUB1-1][Inf]--------------ERASE BOOTLOADER------------
[10:26:21 892][HUB1-1][Inf]--start SendIdentifyCmd
[10:26:21 893][HUB1-1][Inf]--3-2-0-0
[10:26:21 893][HUB1-1][Inf]-------------Download DDR.USB-----------
[10:26:21 893][HUB1-1][Inf]--3-2-0-0
[10:26:21 893][HUB1-1][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
[10:26:22 394][HUB1-1][Inf]--Control write pll reg1 0xfffa0000:0x00005183
[10:26:22 896][HUB1-1][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
[10:26:23 397][HUB1-1][Inf]--Control write pll reg1 0xfffa0000:0x00005183
[10:26:23 898][HUB1-1][Inf]--Write initial succeed
[10:26:23 898][HUB1-1][Inf]--Upload encrypt at 0xff800228
[10:26:23 898][HUB1-1][Inf]--ulValue = 0x20444142
[10:26:23 898][HUB1-1][Inf]--Read encrypt value succeed
[10:26:23 898][HUB1-1][Inf]--Download DDR.USB,size: 65536!
[10:26:33 902][HUB1-1][Err]--Download file failed, sequence 0
[10:26:33 902][HUB1-1][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error

[10:26:33 902][HUB1-1][Inf]--Failure : 1, FailureMax : 3
[10:26:44 405][HUB1-1][Err]--Download file failed, sequence 0
[10:26:44 405][HUB1-1][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error

[10:26:44 405][HUB1-1][Inf]--Failure : 2, FailureMax : 3
[10:26:54 909][HUB1-1][Err]--Download file failed, sequence 0
[10:26:54 909][HUB1-1][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error

[10:26:54 909][HUB1-1][Inf]--Failure : 3, FailureMax : 3
[10:26:54 915][HUB1-1][Err]--[0x10103003]Romcode/Initialize DDR/Download buffer/USB transfer error
[10:26:54 915][HUB1-1][Inf]--Close device handle 0x000008f8

[nicky123]

can you catch the uart port log ?

[Xnamso]

I have the exact same problem
Both usb burning tool and twrp are not working.

[Demon_Acolyte]

The box you have is encrypted, you need an encrypted firmware that doesn't overwrite the bootloader. you can try unchecking erase bootloader when flashing.

[Xnamso]

This box is encrypted indeed, but usb burning tool doesn't work at all for this box. You need to follow xvortex's exact instructions to upgrade this box. I have succesfully installed xvortex's firmware. Absolutely love it!

https://4pda.ru/forum/index.php?showtopic=982302&st=300#entry96036753

[nmocruz]

This box is encrypted indeed, but usb burning tool doesn't work at all for this box. You need to follow xvortex's exact instructions to upgrade this box. I have succesfully installed xvortex's firmware. Absolutely love it!

https://4pda.ru/forum/index.php?showtopic=982302&st=300#entry96036753

can you post this in english and the file somewhere were a non-russian person can download this? I have my box also stuck on boot and no why to flash it again

[nmocruz]

I was able to flags following the instructions, but I still get the device stuck on boot. Same state, I am wondering if we can use same script to flash original firmware instead of slim rom.???