tx3 s905x3 4GB / 32 HDMI No Signal

[Jkbadouvas]

Hi guys,

I am facing a problem with my TX3 s905x3 4GB/32 .
When I connect it to my tv(s) i get no signal.
I have tried two tvs, 4 cables and 6 HDMI ports but the problem is always the same.

You can have a look here https://photos.app.goo.gl/n78ixP9wPjgDiBam9 where I have photos and videos of my problem.

Any Idea what I could do would be nice..

Thanks,
John

[ath156]

Hi guys,

I am facing a problem with my TX3 s905x3 4GB/32 .
When I connect it to my tv(s) i get no signal.
I have tried two tvs, 4 cables and 6 HDMI ports but the problem is always the same.

You can have a look here https://photos.app.goo.gl/n78ixP9wPjgDiBam9 where I have photos and videos of my problem.

Any Idea what I could do would be nice..

Thanks,
John

Did you try (while your box is ON) to just turn OFF your TV and immediately turn it ON again? Dokimase to!

[Jkbadouvas]

Ela patrida! I did everything but no luck... Must be a faulty hdmi port.

[ath156]

Ela patrida! I did everything but no luck... Must be a faulty hdmi port.

Most probably. Maybe this was caused if you tried to do a "Hot plugin", because some times this destroys the HDMI port (some of the boxes don't have such protection to HDMI !!).

Also sometimes it depends on the TV. My H96 max X3 functions perfectly (and CEC) in my Samsung and LG TVs, but in my Philips you can not see it until you do either of the following:
- either first turn ON the Philips TV and then turn ON the H96 max X3.
- or turn ON first the H96 max X3 (which will turn ON also the TV through CEC, but with black screen) and then turn OFF and ON the TV again !!!

Otherwise although the Philips TV recognizes it (even it writes the correct name of the box !!) there is always a black screen, until you do the above.
This happens not only to me but also to other users with Philips TVs.

[Jkbadouvas]

I also have a samsung and an LG tv, and none of those two recognise the box.. shame.

I will go for a replace as it is a 2 days old purchase.

Thanks anyhow!

[hdenie]

I also have a samsung and an LG tv, and none of those two recognise the box.. shame.

I will go for a replace as it is a 2 days old purchase.

Thanks anyhow!

Did you ever got it fixed ?? And if yes what was the problem?

[Jkbadouvas]

Never mate..

[anteros]

not enough power current from the HDMI port the TV box.

Get one of those HDMI power amplifier with one usb plugged into the box and the other is male-female plug into the box.