Announcement

Collapse
No announcement yet.

Help Needed- A95XF3 1% Download Error

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help Needed- A95XF3 1% Download Error

    Hello Team,
    After lot of efforts i received the stock firmware for my bricked unit. I tried loading updating the firmware using Amlogic Burning tool V.2.1.7 but I continue to get an error 1% Download error and here is the log. Request my expert friends to help please
    [17:31:28 329][Global][Inf]--USB_Burning_Tool soft Version: V2.1.7.0
    [17:31:28 329][Global][Inf]--Windows Version: Microsoft Windows 10, Bit: 64
    [17:31:28 337][Global][Inf]--Scan usb device
    [17:31:28 337][Global][Inf]--Aml scan WorldCup Device
    [17:31:28 393][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller
    [17:31:28 397][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9ca6&subsys_390b17aa& rev_03#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [17:31:28 397][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&33875341&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [17:31:28 397][Global][Inf]-------->[Port0]USB#VID_8087&PID_8001#5&3b7dc550&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [17:31:28 453][Global][Inf]---------->[Port0]\\?\usb#vid_1b8e&pid_c003#6&125752a3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    [17:31:28 453][Global][Inf]---------->[Port1]NoDeviceConnected
    [17:31:28 453][Global][Inf]---------->[Port2]NoDeviceConnected
    [17:31:28 453][Global][Inf]---------->[Port3]NoDeviceConnected
    [17:31:28 453][Global][Inf]---------->[Port4]NoDeviceConnected
    [17:31:28 453][Global][Inf]---------->[Port5]NoDeviceConnected
    [17:31:28 453][Global][Inf]---------->[Port6]Other device
    [17:31:28 453][Global][Inf]---------->[Port7]NoDeviceConnected
    [17:31:28 453][Global][Inf]-------->[Port1]NoDeviceConnected
    [17:31:28 457][Global][Inf]--Host: USB xHCI Compliant Host Controller
    [17:31:28 457][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9cb1&subsys_390b17aa& rev_03#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [17:31:28 457][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&36e3211d&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [17:31:28 457][Global][Inf]-------->[Port0]NoDeviceConnected
    [17:31:28 457][Global][Inf]-------->[Port1]NoDeviceConnected
    [17:31:28 457][Global][Inf]-------->[Port2]NoDeviceConnected
    [17:31:28 457][Global][Inf]-------->[Port3]Other device
    [17:31:28 457][Global][Inf]-------->[Port4]NoDeviceConnected
    [17:31:28 457][Global][Inf]-------->[Port5]Other device
    [17:31:28 457][Global][Inf]-------->[Port6]NoDeviceConnected
    [17:31:28 457][Global][Inf]-------->[Port7]NoDeviceConnected
    [17:31:28 457][Global][Inf]-------->[Port8]NoDeviceConnected
    [17:31:28 457][Global][Inf]-------->[Port9]NoDeviceConnected
    [17:31:28 457][Global][Inf]-------->[Port10]NoDeviceConnected
    [17:31:28 457][Global][Inf]-------->[Port11]NoDeviceConnected
    [17:31:28 457][Global][Inf]-------->[Port12]NoDeviceConnected
    [17:31:28 457][Global][Inf]-------->[Port13]NoDeviceConnected
    [17:31:28 457][Global][Inf]-------->[Port14]NoDeviceConnected
    [17:31:28 457][Global][Inf]--Scan USB host controller complete
    [17:31:28 457][Global][Inf]--Update data center with HubMap
    [17:31:28 457][Global][Inf]--Insert new hub2
    [17:31:28 457][Global][Inf]--Update hub2 device data
    [17:31:28 457][Global][Inf]--Update HUB2-1 \\?\usb#vid_1b8e&pid_c003#6&125752a3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    [17:31:28 457][HUB2-1][Inf]--Update device path
    [17:31:28 461][Global][Inf]--Begin thread for HUB2-1
    [17:31:28 461][Global][Inf]--Update HUB2-2?
    [17:31:28 461][Global][Inf]--Burning thread HUB2-1 start
    [17:31:28 461][HUB2-2][Inf]--Update device path
    [17:31:28 461][Global][Inf]--Burning thread HUB2-1 begin run
    [17:31:28 461][Global][Inf]--Update HUB2-3?
    [17:31:28 461][HUB2-3][Inf]--Update device path
    [17:31:28 461][Global][Inf]--Update HUB2-4?
    [17:31:28 461][HUB2-4][Inf]--Update device path
    [17:31:28 461][Global][Inf]--Update HUB2-5?
    [17:31:28 461][HUB2-5][Inf]--Update device path
    [17:31:28 461][Global][Inf]--Update HUB2-6?
    [17:31:28 461][HUB2-6][Inf]--Update device path
    [17:31:28 461][Global][Inf]--Update HUB2-7?
    [17:31:28 461][HUB2-7][Inf]--Update device path
    [17:31:28 461][Global][Inf]--Update HUB2-8?
    [17:31:28 461][HUB2-8][Inf]--Update device path
    [17:31:28 461][Global][Inf]--Add Hub2: \\.\USB#VID_8087&PID_8001#5&3b7dc550&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8} to m_HubDeviceDataVector
    [17:31:28 461][Global][Inf]--Scan end?
    [17:31:41 813][Global][Inf]--User click open button
    [17:31:45 690][Global][Inf]--Image path G:\TVBOX\A95XF3\A95X_F3_20191017senk.img
    [17:31:45 690][Global][Inf]--OpenImg G:\TVBOX\A95XF3\A95X_F3_20191017senk.img
    [17:32:19 699][Global][Inf]--check img crc success!?
    [17:32:19 799]Parse platform.conf?
    [17:32:19 855][Global][Inf]--Parsing burning package
    [17:32:19 855][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp
    [17:32:19 879][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xm l
    [17:32:19 919][Global][Inf]--Get burning key
    [17:32:30 514][Global][Inf]--User click start button
    [17:32:30 514][Global][Inf]--SetErase
    [17:32:30 562][Global][Inf]--Enable burning 1
    [17:32:30 566][Global][Inf]--Scan usb device
    [17:32:30 566][Global][Inf]--Aml scan WorldCup Device
    [17:32:30 566][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller
    [17:32:30 566][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9ca6&subsys_390b17aa& rev_03#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [17:32:30 566][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&33875341&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [17:32:30 566][Global][Inf]-------->[Port0]USB#VID_8087&PID_8001#5&3b7dc550&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [17:32:30 570][Global][Inf]---------->[Port0]\\?\usb#vid_1b8e&pid_c003#6&125752a3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    [17:32:30 570][Global][Inf]---------->[Port1]NoDeviceConnected
    [17:32:30 570][Global][Inf]---------->[Port2]NoDeviceConnected
    [17:32:30 570][Global][Inf]---------->[Port3]NoDeviceConnected
    [17:32:30 570][Global][Inf]---------->[Port4]NoDeviceConnected
    [17:32:30 570][Global][Inf]---------->[Port5]NoDeviceConnected
    [17:32:30 570][Global][Inf]---------->[Port6]Other device
    [17:32:30 570][Global][Inf]---------->[Port7]NoDeviceConnected
    [17:32:30 570][Global][Inf]-------->[Port1]NoDeviceConnected
    [17:32:30 606][HUB2-1][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&125752a3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} ? 0x000008a4
    [17:32:30 662][HUB2-1][Inf]--CloneImageProxy
    [17:32:30 662][Global][Inf]--OpenImg G:\TVBOX\A95XF3\A95X_F3_20191017senk.img
    [17:32:30 738][HUB2-1][Inf]--Connect path=Standard Enhanced PCI to USB Host Controller/P0/P0/P0
    [17:32:30 738][HUB2-1][Inf]--Start burning...
    [17:32:30 802][Global][Inf]--Host: USB xHCI Compliant Host Controller
    [17:32:30 802][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9cb1&subsys_390b17aa& rev_03#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [17:32:30 802][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&36e3211d&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [17:32:30 802][Global][Inf]-------->[Port0]NoDeviceConnected
    [17:32:30 802][Global][Inf]-------->[Port1]NoDeviceConnected
    [17:32:30 802][Global][Inf]-------->[Port2]NoDeviceConnected
    [17:32:30 802][Global][Inf]-------->[Port3]Other device
    [17:32:30 802][Global][Inf]-------->[Port4]NoDeviceConnected
    [17:32:30 806][Global][Inf]-------->[Port5]Other device
    [17:32:30 806][Global][Inf]-------->[Port6]NoDeviceConnected
    [17:32:30 806][Global][Inf]-------->[Port7]NoDeviceConnected
    [17:32:30 806][Global][Inf]-------->[Port8]NoDeviceConnected
    [17:32:30 806][Global][Inf]-------->[Port9]NoDeviceConnected
    [17:32:30 806][Global][Inf]-------->[Port10]NoDeviceConnected
    [17:32:30 806][Global][Inf]-------->[Port11]NoDeviceConnected
    [17:32:30 806][Global][Inf]-------->[Port12]NoDeviceConnected
    [17:32:30 806][Global][Inf]-------->[Port13]NoDeviceConnected
    [17:32:30 806][Global][Inf]-------->[Port14]NoDeviceConnected
    [17:32:30 806][Global][Inf]--Scan USB host controller complete
    [17:32:30 806][Global][Inf]--Update data center with HubMap
    [17:32:30 806][Global][Inf]--Update hub2 device data
    [17:32:30 806][Global][Inf]--Update HUB2-1 \\?\usb#vid_1b8e&pid_c003#6&125752a3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    [17:32:30 806][HUB2-1][Inf]--Update device path
    [17:32:30 806][Global][Inf]--Update HUB2-2?
    [17:32:30 806][HUB2-2][Inf]--Update device path
    [17:32:30 806][Global][Inf]--Update HUB2-3?
    [17:32:30 806][HUB2-3][Inf]--Update device path
    [17:32:30 806][Global][Inf]--Update HUB2-4?
    [17:32:30 806][HUB2-4][Inf]--Update device path
    [17:32:30 806][Global][Inf]--Update HUB2-5?
    [17:32:30 806][HUB2-5][Inf]--Update device path
    [17:32:30 806][Global][Inf]--Update HUB2-6?
    [17:32:30 806][HUB2-6][Inf]--Update device path
    [17:32:30 806][Global][Inf]--Update HUB2-7?
    [17:32:30 806][HUB2-7][Inf]--Update device path
    [17:32:30 806][Global][Inf]--Update HUB2-8?
    [17:32:30 806][HUB2-8][Inf]--Update device path
    [17:32:30 806][Global][Inf]--Scan end?
    [17:32:30 822][HUB2-1][Inf]--------------ERASE BOOTLOADER------------
    [17:32:30 867][HUB2-1][Inf]-------------Download DDR.USB-----------
    [17:32:30 867][HUB2-1][Inf]--Close device handle 0x000008a4
    [17:32:30 922][HUB2-1][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&125752a3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} ? 0x000008a4
    [17:32:31 007][HUB2-1][Inf]--3-2-0-0
    [17:32:31 007][HUB2-1][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
    [17:32:31 511][HUB2-1][Inf]--Control write pll reg1 0xfffa0000:0x00005183
    [17:32:32 016][HUB2-1][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
    [17:32:32 520][HUB2-1][Inf]--Control write pll reg1 0xfffa0000:0x00005183
    [17:32:33 021][HUB2-1][Inf]--Write initial succeed
    [17:32:33 021][HUB2-1][Inf]--Upload encrypt at 0xff800228
    [17:32:33 021][HUB2-1][Inf]--ulValue = 0x20444142
    [17:32:33 021][HUB2-1][Inf]--Read encrypt value succeed
    [17:32:33 021][HUB2-1][Inf]--Download DDR.USB,size: 65536!
    [17:32:43 037][HUB2-1][Err]--Download file failed, sequence 0?
    [17:32:43 037][HUB2-1][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error

    [17:32:43 037][HUB2-1][Inf]--Failure : 1, FailureMax : 3
    [17:32:53 558][HUB2-1][Err]--Download file failed, sequence 0?
    [17:32:53 558][HUB2-1][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error

    [17:32:53 558][HUB2-1][Inf]--Failure : 2, FailureMax : 3
    [17:33:04 068][HUB2-1][Err]--Download file failed, sequence 0?
    [17:33:04 068][HUB2-1][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error

    [17:33:04 068][HUB2-1][Inf]--Failure : 3, FailureMax : 3
    [17:33:04 234][HUB2-1][Err]--[0x10103003]Romcode/Initialize DDR/Download buffer/USB transfer error
    Last edited by gefattern; 11-22-2019, 15:14.

    #2
    Does your box load at least to the logo?

    Comment


      #3
      Originally posted by Rajan2002 View Post
      Hello Team,
      After lot of efforts i received the stock firmware for my bricked unit. I tried loading updating the firmware using Amlogic Burning tool V.2.1.7 but I continue to get an error 1% Download error and here is the log. Request my expert friends to help please
      [17:31:28 329][Global][Inf]--USB_Burning_Tool soft Version: V2.1.7.0
      [17:31:28 329][Global][Inf]--Windows Version: Microsoft Windows 10, Bit: 64
      [17:31:28 337][Global][Inf]--Scan usb device
      [17:31:28 337][Global][Inf]--Aml scan WorldCup Device
      [17:31:28 393][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller
      [17:31:28 397][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9ca6&subsys_390b17aa& rev_03#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
      [17:31:28 397][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&33875341&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
      [17:31:28 397][Global][Inf]-------->[Port0]USB#VID_8087&PID_8001#5&3b7dc550&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
      [17:31:28 453][Global][Inf]---------->[Port0]\\?\usb#vid_1b8e&pid_c003#6&125752a3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
      [17:31:28 453][Global][Inf]---------->[Port1]NoDeviceConnected
      [17:31:28 453][Global][Inf]---------->[Port2]NoDeviceConnected
      [17:31:28 453][Global][Inf]---------->[Port3]NoDeviceConnected
      [17:31:28 453][Global][Inf]---------->[Port4]NoDeviceConnected
      [17:31:28 453][Global][Inf]---------->[Port5]NoDeviceConnected
      [17:31:28 453][Global][Inf]---------->[Port6]Other device
      [17:31:28 453][Global][Inf]---------->[Port7]NoDeviceConnected
      [17:31:28 453][Global][Inf]-------->[Port1]NoDeviceConnected
      [17:31:28 457][Global][Inf]--Host: USB xHCI Compliant Host Controller
      [17:31:28 457][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9cb1&subsys_390b17aa& rev_03#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
      [17:31:28 457][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&36e3211d&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
      [17:31:28 457][Global][Inf]-------->[Port0]NoDeviceConnected
      [17:31:28 457][Global][Inf]-------->[Port1]NoDeviceConnected
      [17:31:28 457][Global][Inf]-------->[Port2]NoDeviceConnected
      [17:31:28 457][Global][Inf]-------->[Port3]Other device
      [17:31:28 457][Global][Inf]-------->[Port4]NoDeviceConnected
      [17:31:28 457][Global][Inf]-------->[Port5]Other device
      [17:31:28 457][Global][Inf]-------->[Port6]NoDeviceConnected
      [17:31:28 457][Global][Inf]-------->[Port7]NoDeviceConnected
      [17:31:28 457][Global][Inf]-------->[Port8]NoDeviceConnected
      [17:31:28 457][Global][Inf]-------->[Port9]NoDeviceConnected
      [17:31:28 457][Global][Inf]-------->[Port10]NoDeviceConnected
      [17:31:28 457][Global][Inf]-------->[Port11]NoDeviceConnected
      [17:31:28 457][Global][Inf]-------->[Port12]NoDeviceConnected
      [17:31:28 457][Global][Inf]-------->[Port13]NoDeviceConnected
      [17:31:28 457][Global][Inf]-------->[Port14]NoDeviceConnected
      [17:31:28 457][Global][Inf]--Scan USB host controller complete
      [17:31:28 457][Global][Inf]--Update data center with HubMap
      [17:31:28 457][Global][Inf]--Insert new hub2
      [17:31:28 457][Global][Inf]--Update hub2 device data
      [17:31:28 457][Global][Inf]--Update HUB2-1 \\?\usb#vid_1b8e&pid_c003#6&125752a3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
      [17:31:28 457][HUB2-1][Inf]--Update device path
      [17:31:28 461][Global][Inf]--Begin thread for HUB2-1
      [17:31:28 461][Global][Inf]--Update HUB2-2?
      [17:31:28 461][Global][Inf]--Burning thread HUB2-1 start
      [17:31:28 461][HUB2-2][Inf]--Update device path
      [17:31:28 461][Global][Inf]--Burning thread HUB2-1 begin run
      [17:31:28 461][Global][Inf]--Update HUB2-3?
      [17:31:28 461][HUB2-3][Inf]--Update device path
      [17:31:28 461][Global][Inf]--Update HUB2-4?
      [17:31:28 461][HUB2-4][Inf]--Update device path
      [17:31:28 461][Global][Inf]--Update HUB2-5?
      [17:31:28 461][HUB2-5][Inf]--Update device path
      [17:31:28 461][Global][Inf]--Update HUB2-6?
      [17:31:28 461][HUB2-6][Inf]--Update device path
      [17:31:28 461][Global][Inf]--Update HUB2-7?
      [17:31:28 461][HUB2-7][Inf]--Update device path
      [17:31:28 461][Global][Inf]--Update HUB2-8?
      [17:31:28 461][HUB2-8][Inf]--Update device path
      [17:31:28 461][Global][Inf]--Add Hub2: \\.\USB#VID_8087&PID_8001#5&3b7dc550&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8} to m_HubDeviceDataVector
      [17:31:28 461][Global][Inf]--Scan end?
      [17:31:41 813][Global][Inf]--User click open button
      [17:31:45 690][Global][Inf]--Image path G:\TVBOX\A95XF3\A95X_F3_20191017senk.img
      [17:31:45 690][Global][Inf]--OpenImg G:\TVBOX\A95XF3\A95X_F3_20191017senk.img
      [17:32:19 699][Global][Inf]--check img crc success!?
      [17:32:19 799]Parse platform.conf?
      [17:32:19 855][Global][Inf]--Parsing burning package
      [17:32:19 855][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp
      [17:32:19 879][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xm l
      [17:32:19 919][Global][Inf]--Get burning key
      [17:32:30 514][Global][Inf]--User click start button
      [17:32:30 514][Global][Inf]--SetErase
      [17:32:30 562][Global][Inf]--Enable burning 1
      [17:32:30 566][Global][Inf]--Scan usb device
      [17:32:30 566][Global][Inf]--Aml scan WorldCup Device
      [17:32:30 566][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller
      [17:32:30 566][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9ca6&subsys_390b17aa& rev_03#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
      [17:32:30 566][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&33875341&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
      [17:32:30 566][Global][Inf]-------->[Port0]USB#VID_8087&PID_8001#5&3b7dc550&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
      [17:32:30 570][Global][Inf]---------->[Port0]\\?\usb#vid_1b8e&pid_c003#6&125752a3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
      [17:32:30 570][Global][Inf]---------->[Port1]NoDeviceConnected
      [17:32:30 570][Global][Inf]---------->[Port2]NoDeviceConnected
      [17:32:30 570][Global][Inf]---------->[Port3]NoDeviceConnected
      [17:32:30 570][Global][Inf]---------->[Port4]NoDeviceConnected
      [17:32:30 570][Global][Inf]---------->[Port5]NoDeviceConnected
      [17:32:30 570][Global][Inf]---------->[Port6]Other device
      [17:32:30 570][Global][Inf]---------->[Port7]NoDeviceConnected
      [17:32:30 570][Global][Inf]-------->[Port1]NoDeviceConnected
      [17:32:30 606][HUB2-1][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&125752a3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} ? 0x000008a4
      [17:32:30 662][HUB2-1][Inf]--CloneImageProxy
      [17:32:30 662][Global][Inf]--OpenImg G:\TVBOX\A95XF3\A95X_F3_20191017senk.img
      [17:32:30 738][HUB2-1][Inf]--Connect path=Standard Enhanced PCI to USB Host Controller/P0/P0/P0
      [17:32:30 738][HUB2-1][Inf]--Start burning...
      [17:32:30 802][Global][Inf]--Host: USB xHCI Compliant Host Controller
      [17:32:30 802][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9cb1&subsys_390b17aa& rev_03#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
      [17:32:30 802][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&36e3211d&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
      [17:32:30 802][Global][Inf]-------->[Port0]NoDeviceConnected
      [17:32:30 802][Global][Inf]-------->[Port1]NoDeviceConnected
      [17:32:30 802][Global][Inf]-------->[Port2]NoDeviceConnected
      [17:32:30 802][Global][Inf]-------->[Port3]Other device
      [17:32:30 802][Global][Inf]-------->[Port4]NoDeviceConnected
      [17:32:30 806][Global][Inf]-------->[Port5]Other device
      [17:32:30 806][Global][Inf]-------->[Port6]NoDeviceConnected
      [17:32:30 806][Global][Inf]-------->[Port7]NoDeviceConnected
      [17:32:30 806][Global][Inf]-------->[Port8]NoDeviceConnected
      [17:32:30 806][Global][Inf]-------->[Port9]NoDeviceConnected
      [17:32:30 806][Global][Inf]-------->[Port10]NoDeviceConnected
      [17:32:30 806][Global][Inf]-------->[Port11]NoDeviceConnected
      [17:32:30 806][Global][Inf]-------->[Port12]NoDeviceConnected
      [17:32:30 806][Global][Inf]-------->[Port13]NoDeviceConnected
      [17:32:30 806][Global][Inf]-------->[Port14]NoDeviceConnected
      [17:32:30 806][Global][Inf]--Scan USB host controller complete
      [17:32:30 806][Global][Inf]--Update data center with HubMap
      [17:32:30 806][Global][Inf]--Update hub2 device data
      [17:32:30 806][Global][Inf]--Update HUB2-1 \\?\usb#vid_1b8e&pid_c003#6&125752a3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
      [17:32:30 806][HUB2-1][Inf]--Update device path
      [17:32:30 806][Global][Inf]--Update HUB2-2?
      [17:32:30 806][HUB2-2][Inf]--Update device path
      [17:32:30 806][Global][Inf]--Update HUB2-3?
      [17:32:30 806][HUB2-3][Inf]--Update device path
      [17:32:30 806][Global][Inf]--Update HUB2-4?
      [17:32:30 806][HUB2-4][Inf]--Update device path
      [17:32:30 806][Global][Inf]--Update HUB2-5?
      [17:32:30 806][HUB2-5][Inf]--Update device path
      [17:32:30 806][Global][Inf]--Update HUB2-6?
      [17:32:30 806][HUB2-6][Inf]--Update device path
      [17:32:30 806][Global][Inf]--Update HUB2-7?
      [17:32:30 806][HUB2-7][Inf]--Update device path
      [17:32:30 806][Global][Inf]--Update HUB2-8?
      [17:32:30 806][HUB2-8][Inf]--Update device path
      [17:32:30 806][Global][Inf]--Scan end?
      [17:32:30 822][HUB2-1][Inf]--------------ERASE BOOTLOADER------------
      [17:32:30 867][HUB2-1][Inf]-------------Download DDR.USB-----------
      [17:32:30 867][HUB2-1][Inf]--Close device handle 0x000008a4
      [17:32:30 922][HUB2-1][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&125752a3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} ? 0x000008a4
      [17:32:31 007][HUB2-1][Inf]--3-2-0-0
      [17:32:31 007][HUB2-1][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
      [17:32:31 511][HUB2-1][Inf]--Control write pll reg1 0xfffa0000:0x00005183
      [17:32:32 016][HUB2-1][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
      [17:32:32 520][HUB2-1][Inf]--Control write pll reg1 0xfffa0000:0x00005183
      [17:32:33 021][HUB2-1][Inf]--Write initial succeed
      [17:32:33 021][HUB2-1][Inf]--Upload encrypt at 0xff800228
      [17:32:33 021][HUB2-1][Inf]--ulValue = 0x20444142
      [17:32:33 021][HUB2-1][Inf]--Read encrypt value succeed
      [17:32:33 021][HUB2-1][Inf]--Download DDR.USB,size: 65536!
      [17:32:43 037][HUB2-1][Err]--Download file failed, sequence 0?
      [17:32:43 037][HUB2-1][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error

      [17:32:43 037][HUB2-1][Inf]--Failure : 1, FailureMax : 3
      [17:32:53 558][HUB2-1][Err]--Download file failed, sequence 0?
      [17:32:53 558][HUB2-1][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error

      [17:32:53 558][HUB2-1][Inf]--Failure : 2, FailureMax : 3
      [17:33:04 068][HUB2-1][Err]--Download file failed, sequence 0?
      [17:33:04 068][HUB2-1][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error

      [17:33:04 068][HUB2-1][Inf]--Failure : 3, FailureMax : 3
      [17:33:04 234][HUB2-1][Err]--[0x10103003]Romcode/Initialize DDR/Download buffer/USB transfer error
      ?
      Does your box load at least to the logo?

      Comment


        #4
        Originally posted by Amvlasovi53 View Post

        Does your box load at least to the logo?
        Unfortunately not but USB Burning tool detects it and update gets stuck at 1% as indicated in log as well
        regards

        Comment


          #5
          The only thing I can try to get firmware on my box and test, but for this I need the original firmware for this box !!!

          Comment


            #6
            Originally posted by Rajan2002 View Post
            ...After lot of efforts i received the stock firmware for my bricked unit...
            Edit: (Please, can you share the firmware ?) no need i allready found it here.

            Are you sure, that you have working FW for your box and try to reinstall USB Burning tool (WorldCup drivers) ?
            atvXperience on Tanix BOX

            Comment


              #7
              Originally posted by mAtvXk View Post
              Edit: (Please, can you share the firmware ?) no need i allready found it here.

              Are you sure, that you have working FW for your box and try to reinstall USB Burning tool (WorldCup drivers) ?
              I tried this firmware but i get stuck at 1% Download DDR. Looks like my box is dead. Is it because bootloader is locked. I tried multiple PCs and multiple cables but end up getting same error.

              Comment


                #8
                I tried this firmware as well

                http://blog.geekbuying.com/2019/11/a...date-20191017/

                But no success yet.

                Comment


                  #9
                  Have you tried to remove the Daw from the erase bootloader option?

                  Comment


                    #10
                    Hi
                    this site has a firmware for a95x f3
                    https://androidpc.es/firmware-a95x-f3-rom/

                    goodluck

                    Comment


                      #11
                      Originally posted by mitchell4you View Post
                      Hi
                      this site has a firmware for a95x f3
                      https://androidpc.es/firmware-a95x-f3-rom/

                      goodluck
                      Thank you Dear. I just returned the unit to the seller.
                      Last edited by gefattern; 11-22-2019, 15:12.

                      Comment


                        #12
                        This box seems not to allow to modify Rom. uncheck the erase rom check box option in the usb burning tool. This will clear the problem stuck at 1 % ddr download
                        Last edited by gefattern; 11-22-2019, 15:12.

                        Comment


                          #13
                          I bought this box And it's always blocking and restarts itself, You can work for a minute and lock as 30 minutes..
                          I've already done factory reset and reinstalled the rom, but it's still the same.

                          Anyone with this problem???

                          Any idea to solve???

                          Comment


                            #14
                            hmm..
                            boot device with only the power supply connected.. ( to see its a port like USB or HDMI short issue )
                            try a different power supply ( encase its a faulty power supply aka not enough amp )
                            under settings/developer/ enable show CPU usage ( to see if its a app or service that's the cause )
                            under settings/storage/internal/cache ( empty cache.. if the cache is full it can create allot of issues )
                            install a CPU temp monitor app... see if it overheating

                            just some thoughts

                            Comment


                              #15
                              Originally posted by mitchell4you View Post
                              hmm..
                              boot device with only the power supply connected.. ( to see its a port like USB or HDMI short issue )
                              try a different power supply ( encase its a faulty power supply aka not enough amp )
                              under settings/developer/ enable show CPU usage ( to see if its a app or service that's the cause )
                              under settings/storage/internal/cache ( empty cache.. if the cache is full it can create allot of issues )
                              install a CPU temp monitor app... see if it overheating

                              just some thoughts
                              first of all thanks for the answer i will test this and put the results here after

                              Comment

                              Working...
                              X