Announcement

Collapse
No announcement yet.

[ROM] "GENERIC" SC v2.0 USER/USERDEBUG - S905x2 / S905x3 - AndroidTV Build

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • blust0ne
    replied
    to napalmd


    you have to try override the eMMC , then you can boot microsd that is prepared by burn card maker.


    https://forum.freaktab.com/forum/tv-...124#post794124

    maybe try to use the aluminium foil like amazon fire stick 4K rooting process,

    Attached Files

    Leave a comment:


  • superceleron
    commented on 's reply
    no you do not need the 3.3v ...
    Well then something is wrong with you connection, because you have to get a shell, since it gets past uboot and only gets stuck in kernel emmc format!

  • napalmd
    replied
    Originally posted by superceleron View Post

    you need to be very fast, keep pressing enter in putty screen!
    I'm pressing as fast as I can and can't get a prompt. also tried in another pc, same thing.

    Originally posted by blust0ne View Post

    check the boot stage with putty log file or attach your log file for reference.

    BL1 BL2 BL3-1 --> BL3-3 ( you can get a uart console access here, in 2-3 second after power on)
    here is boot log https://pastebin.com/QZLegy3Q

    do I need to connect the 3.3v? I only connected ground,Tx and RX

    Leave a comment:


  • superceleron
    replied
    Originally posted by Jancales View Post
    superceleron I saw this post in the review of the Gt1 Mini2 thread, do you know if this is working in your ROM?


    https://forum.freaktab.com/forum/tv-...577#post791577


    Hi, I have a problem with HDR10+ video files (SMPTE ST 2094) on my GT1-mini2, since my TV propably don't support HDR10+ it should fallback to HDR10 (this happens when i'm using internal player from my TV) but it doesn't work at all on GT1mini2 and presents "washed/grayed" colours, official spec state that this box support HDR10+. All HDR10 videos (SMPTE ST 2086) works well, and by the way, if i open HDR10+ file the HDR feature breaks and my TV isn't triggering HDR mode even for the "normal" HDR10 until i replug HDMI cable/change resolution etc.

    and

    Quite disappointed. I got feedback that the codec of this box is bad !

    The author of the netflix kodi plugin has given up hope on it, it can't decode basic video on netflix properly.
    dunno really, and i do not have time now to test it!

    Leave a comment:


  • Jancales
    replied
    superceleron I saw this post in the review of the Gt1 Mini2 thread, do you know if this is working in your ROM?


    https://forum.freaktab.com/forum/tv-...577#post791577


    Hi, I have a problem with HDR10+ video files (SMPTE ST 2094) on my GT1-mini2, since my TV propably don't support HDR10+ it should fallback to HDR10 (this happens when i'm using internal player from my TV) but it doesn't work at all on GT1mini2 and presents "washed/grayed" colours, official spec state that this box support HDR10+. All HDR10 videos (SMPTE ST 2086) works well, and by the way, if i open HDR10+ file the HDR feature breaks and my TV isn't triggering HDR mode even for the "normal" HDR10 until i replug HDMI cable/change resolution etc.

    and

    Quite disappointed. I got feedback that the codec of this box is bad !

    The author of the netflix kodi plugin has given up hope on it, it can't decode basic video on netflix properly.

    Leave a comment:


  • blust0ne
    replied
    Originally posted by napalmd View Post

    thanks for the help, but I keep bashing enter key but it does not work. I use putty, speed 115200. usb to uart adapter is pl2303. I also tried with a keyboard attached to the tvbox and pressing enter there, also didn't work.
    check the boot stage with putty log file or attach your log file for reference.

    BL1 BL2 BL3-1 --> BL3-3 ( you can get a uart console access here, in 2-3 second after power on)

    Leave a comment:


  • superceleron
    replied
    here... see this small video i just did!

    https://mega.nz/#!htpHSAzS!Y1JEKGvNE...1mvXNZ0a3rbRQs

    Leave a comment:


  • superceleron
    replied
    Originally posted by napalmd View Post

    thanks for the help, but I keep bashing enter key but it does not work. I use putty, speed 115200. usb to uart adapter is pl2303. I also tried with a keyboard attached to the tvbox and pressing enter there, also didn't work.
    you need to be very fast, keep pressing enter in putty screen!

    Leave a comment:


  • napalmd
    replied
    Originally posted by superceleron View Post

    hoo i see, the issue in your box from my build is the emmc is not compatible with my DT...
    Anyway just as soon as you turn on the box just keep pressing enter key in serial terminal until you get a shell, something like "g12a_u212_v1:>"
    When that happen, just type "update" and press enter ( without the "" ) and connect the usb cable and voila you can flash the box!
    thanks for the help, but I keep bashing enter key but it does not work. I use putty, speed 115200. usb to uart adapter is pl2303. I also tried with a keyboard attached to the tvbox and pressing enter there, also didn't work.

    Leave a comment:


  • superceleron
    replied
    Originally posted by napalmd View Post

    I have serial output here is the log:
    https://pastebin.com/UyutfR7T


    I tried with sdcard but didn't work.

    how do I flash firmware with uart?
    hoo i see, the issue in your box from my build is the emmc is not compatible with my DT...
    Anyway just as soon as you turn on the box just keep pressing enter key in serial terminal until you get a shell, something like "g12a_u212_v1:>"
    When that happen, just type "update" and press enter ( without the "" ) and connect the usb cable and voila you can flash the box!

    Leave a comment:


  • napalmd
    replied
    Originally posted by superceleron View Post

    Untick Erase bootloader at this moment does not save you from bricking the device..
    Now you have to see if you have serial output then you can put the box in update mode from inside uboot, or find the emmc mask mode for that box!
    I have serial output here is the log:
    https://pastebin.com/UyutfR7T

    Originally posted by blust0ne View Post

    try burn_card_maker first with your stock firmware, it can be used when the usb device does not appear on windows.

    if burn card maker failed , check u-boot uart and masking the eMMC.
    I tried with sdcard but didn't work.

    how do I flash firmware with uart?

    Leave a comment:


  • superceleron
    replied
    Originally posted by Jancales View Post
    Is this rom based on a Beelink Mini 2 firmware, and if so which version please?


    Has anyone run a Antutu test on a Mini 2 with this build ?
    No its not based in any stock fw out there!

    Originally posted by vodik View Post
    I use only system partition on my A95X F2

    At the end of setup wizard, when user can choose apps for install, I always remove all selected, but all apps are still installed


    UPDATE
    Google Assistant don't recognize speech. It shows I speak something, but without recognizing text.
    Can anybody help me?
    Log https://drive.google.com/file/d/1OCK...ew?usp=sharing
    Well something is not ok in that "transplant", you receiving crashes in audio server... i think is because if the kernel but i cant be sure, a bet you using stock kernel!
    If that kernel is not based in latest aml sdk... you going to have issues!
    But 1ยบ i recommend you test change not only system, but also vendor partitions... but because your vendor m8 be different size of mine you need to do some adjustments to the DT for it to boot!

    Originally posted by tyrol_gangster View Post
    Hi, can somebody help me understand please, is this ROM what I need to run ATV apps on a S905x3 device (e.g. X96 Air or A95 F3)? For example https://play.google.com/store/apps/d...box.digi&hl=en ? Or does the ROM just have the same UI, but such apps still need a Google certified device to run?
    Yes this is as True ATV as possible, it not based in stock rom and totally made from a sdk.
    And yes that app will install just fine in this rom, but i think only in the USER build, because i think that app checks if the device is rooted and selinux permissive...
    Now... if it works on that 2 boxes you say, i totally do not now, this is as generic as possible but i cant cover all different hw's out there that is impossible!

    Leave a comment:


  • tyrol_gangster
    replied
    Hi, can somebody help me understand please, is this ROM what I need to run ATV apps on a S905x3 device (e.g. X96 Air or A95 F3)? For example https://play.google.com/store/apps/d...box.digi&hl=en ? Or does the ROM just have the same UI, but such apps still need a Google certified device to run?

    Leave a comment:


  • vodik
    replied
    I use only system partition on my A95X F2

    At the end of setup wizard, when user can choose apps for install, I always remove all selected, but all apps are still installed


    UPDATE
    Google Assistant don't recognize speech. It shows I speak something, but without recognizing text.
    Can anybody help me?
    Log https://drive.google.com/file/d/1OCK...ew?usp=sharing
    Last edited by vodik; 01-22-2020, 05:51.

    Leave a comment:


  • Jancales
    replied
    Is this rom based on a Beelink Mini 2 firmware, and if so which version please?


    Has anyone run a Antutu test on a Mini 2 with this build ?

    Leave a comment:

Working...
X