If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
SC can't know if the ROM will work on all devices with S905X3.
You'll have to be the first tester!!!
Buy device upload pictures of the board, eMMC, and Ram chips. This will help others identify your board.
I suspect that X10 device is clone of A95X model. But from just looking at the Amazon pictures it says "DDR3" --not all DDR3 ram is compatible with this ROM, if you read all of this thread most users with DDR3 failed installation of this ROM.
Best option is just to buy Beelink GTmini(2) which is what this ROM is tested on and works ?.
Need some help here.
I flashed this rom in my Mecool KM9 S905x2, the ROM 8.1 from you superceleron worked all ok but this one since i end flashed it wont turn on, i cant enter download mode, it seems like is dead no lights or anything that seems to be working.
Is there any pin point i can do that anyone knows (other then the reset boton on AV hole)
Need some help here.
I flashed this rom in my Mecool KM9 S905x2, the ROM 8.1 from you superceleron worked all ok but this one since i end flashed it wont turn on, i cant enter download mode, it seems like is dead no lights or anything that seems to be working.
Is there any pin point i can do that anyone knows (other then the reset boton on AV hole)
if you can enter in "flash" mode then you can flash another rom.
But is weird my 8.1 works and this one does not, since the uboot is "almost" the same.
Thats the thing... enter flash like i used to do dont do anything.
The box seems like its dead, normaly to enter flash i just pin reset button (in AV) and plug usb cable, but nothing is detected!
Changed cable try to connect to tv with power, and nothing happens, no light in the leds of the box, no usb detected nothing,
For that the question if anyone knows any combination of pinouts that i can do to try do revive the box.
Thats the thing... enter flash like i used to do dont do anything.
The box seems like its dead, normaly to enter flash i just pin reset button (in AV) and plug usb cable, but nothing is detected!
Changed cable try to connect to tv with power, and nothing happens, no light in the leds of the box, no usb detected nothing,
For that the question if anyone knows any combination of pinouts that i can do to try do revive the box.
Hi Everyone
We have created this thread to collect all the NAND pin Short to Mask ROM Mode locations for all our members.
Because firmware comes on android
Later i will try to flash this firmware again to make sure if it was this firmware or something that went wrong.
I installed this rom on tictid box, setup was fine but remote isnt configured properly. the "ok" button on remote does nothing so i cant get past setup screen. Any help?
I installed this rom on tictid box, setup was fine but remote isnt configured properly. the "ok" button on remote does nothing so i cant get past setup screen. Any help?
Thanks
Use a usb connected keyboard and usb connected mouse!
That same remote can be bought on Aliexpress for $9 or $10 dollars if don't mind waiting for it to be delivered for free through Postal service. If you want immediate delivery order it through Amazon.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment