Stock firmware HK1 BOX

[bergerov]

Thank you for the explanation and for the advice.
I will buy on amazon:
https: //www.amazon.de/-/en/dp/B07Z7Q4K41/ref=psdc_189155031_t1_B07Z7R84NV
They state LAN 1000 RJ-45 maybe that's not false. I have one more question. Is there any difference between HK1 64 GB ROM and HK1 128 GB ROM besides memory size? I read that there is a difference in wifi

Thank you

[ath156]

Thank you for the explanation and for the advice.
I will buy on amazon:
https: //www.amazon.de/-/en/dp/B07Z7Q4K41/ref=psdc_189155031_t1_B07Z7R84NV
They state LAN 1000 RJ-45 maybe that's not false. I have one more question. Is there any difference between HK1 64 GB ROM and HK1 128 GB ROM besides memory size? I read that there is a difference in wifi

Thank you

Even 32 GB usually is more than enough. As far as wifi chip not according to my current knowledge, but you never know................... Look at the Lan I told you. Until recently there were only TVboxes of this "family" with 1.000Lan.
As far as wifi chip is concerned only H96 max X3 had 2 significantly different versions (only H96 max X3 with blue board and IT6334 needed a different firmware).
Just an advice. When you receive the TVbox make a TWRP backup of Boot,System,Vendor partitions, before you try any other firmware. After that you have nothing to be afraid of !!

[bishopx26]

I had x96 max and now the hdmi port dont show the picture on tv. It works only with av cable. I think thata a processor failure. Is hk1 the best box for this price?

[figu]

They are exactly the same. If you open a Vontar X3 you will find that its motherboard will say HK1 !!!!!!!!!!!!!
There is a whole number of such clones that can use the same firmware (it doesn't matter if it say 212 or 219 or whatever).
Look at my custom rom for them https://mega.nz/file/Qh1G2LjJ#KOvtbh...rhZBSkqv1hQUCM

Only be carefull because it seems that there may be a new version of HK1 Box with only 100 Lan (while all of the clones until today they had 1.000 Lan).
So be sure that you order the one with 1.000 Lan and not 100.
I would certainly prefer HK1 Box and not Vontar X3, because there were a number of them with a certain problem (look at aother threads about this problem).

It keeps giving this error, installation does not continue

https://dosya.co/zs0h2on6cjyk/Screenshot_20210917-153104.png.html