Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
[ROM] SLIMBOX X3 ATV and AOSP for N5MAX S905X3
Collapse
This topic is closed.
X
X
-
SlimHouse The rom can you put it with the USB burning tool and then put the tvbox provider from recovery? Is there a video tutorial?
-
I use ATV version. Ther are two problems for my Turawell T95 Max+ 4GB/64GB
First, It does not open the first time with the remote. I can use the remote after it is turned on.
Second, The front panel does not work. There is no light.Last edited by ahbecan; 06-07-2020, 13:11.
Leave a comment:
-
I also thought it was x3. maybe the app is wrong. I still have a guarantee ...
Leave a comment:
-
I thought the A95X F3 was the S905X3 chip?
I thought the F3 means X3 version?
The only way you will know for sure is to look at the chip under the heatsink.
I wouldnt just guess and flash it with the wrong firmware till you know forsure
Leave a comment:
-
Hello everybody, i use google translation. I ordered an a95x f3. According to the App Device Info Hw, the Soc is shown to me as s905x2 series. is the box correct is a real A95X F3 RGB? thank you for your help
Schoenchen
Leave a comment:
-
The box now is even in worse state, doesnt boot, TWRP is gone, has the original recovery and it fails all time do any thing.
fail to mount /cache (I/O error). An must of the error are trying to mount partition. I'm lost dont know how to recover the device. the USB burner fails, the SD card fails, the recovery fails.
Leave a comment:
-
Originally posted by raruba View Post
Sorry don't have an X88 Pro X3, but it looks like the X99 Max+ should work on it. Slimhouse should know.
Leave a comment:
-
Originally posted by nmocruz View PostI have this installed on a x88 pro x3, I wanted to replace the orginal firmware, not sure if I'm using the rigth one but I'm getting this from the burn tool
20:03:49 917][HUB3-4][Inf]--Download DDR.USB,size: 65536!
[20:03:49 918][HUB3-4][Err]--Download file failed, sequence 0
[20:03:49 918][HUB3-4][Err]--usbWriteFile len=4096, ret=-5 error_msg=libusb0-dll:err [_usb_reap_async] reaping request failed, win error: A device attached to the system is not functioning.
[20:03:49 918][HUB3-4][Inf]--Failure : 1, FailureMax : 3
[20:04:00 419][HUB3-4][Err]--Download file failed, sequence 0
[20:04:00 419][HUB3-4][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error
[20:04:00 419][HUB3-4][Inf]--Failure : 2, FailureMax : 3
[20:04:10 922][HUB3-4][Err]--Download file failed, sequence 0
[20:04:10 922][HUB3-4][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error
[20:04:10 922][HUB3-4][Inf]--Failure : 3, FailureMax : 3
[20:04:10 927][HUB3-4][Err]--[0x10103003]Romcode/Initialize DDR/Download buffer/USB transfer error
Anyone has the original firmware for the X88 pro x3? the one I got is x88pro-s905x3_d4_sp6255_x88prox3_20200115_r1, and is not burning
Leave a comment:
-
I have this installed on a x88 pro x3, I wanted to replace the orginal firmware, not sure if I'm using the rigth one but I'm getting this from the burn tool
20:03:49 917][HUB3-4][Inf]--Download DDR.USB,size: 65536!
[20:03:49 918][HUB3-4][Err]--Download file failed, sequence 0
[20:03:49 918][HUB3-4][Err]--usbWriteFile len=4096, ret=-5 error_msg=libusb0-dll:err [_usb_reap_async] reaping request failed, win error: A device attached to the system is not functioning.
[20:03:49 918][HUB3-4][Inf]--Failure : 1, FailureMax : 3
[20:04:00 419][HUB3-4][Err]--Download file failed, sequence 0
[20:04:00 419][HUB3-4][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error
[20:04:00 419][HUB3-4][Inf]--Failure : 2, FailureMax : 3
[20:04:10 922][HUB3-4][Err]--Download file failed, sequence 0
[20:04:10 922][HUB3-4][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error
[20:04:10 922][HUB3-4][Inf]--Failure : 3, FailureMax : 3
[20:04:10 927][HUB3-4][Err]--[0x10103003]Romcode/Initialize DDR/Download buffer/USB transfer error
Anyone has the original firmware for the X88 pro x3? the one I got is x88pro-s905x3_d4_sp6255_x88prox3_20200115_r1, and is not burning
Leave a comment:
-
Originally posted by SlimHouse View Post
Update: installed v4.4 AOSP and playback in setting still doesn't work. Just thought I would let u know.Last edited by raruba; 06-03-2020, 11:36.
Leave a comment:
-
Guest repliedOriginally posted by tupta View PostLooking for working link with TWRP...
Leave a comment:
-
Originally posted by raruba View Post
I also have a Magicsee N5 Max 4g 64g box, do I need to install the vendor for this? If so which one do I use?
Leave a comment:
What's Going On
Collapse
There are currently 10733 users online. 3 members and 10730 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Leave a comment: