If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
R-Box Pro 3GB (q9377) bricked and recovery doesn't boot but I have access via serial port
R-Box Pro 3GB (q9377) bricked and recovery doesn't boot but I have access via serial port
I was trying to flash a custom logo on it and the colors were not correct and on my 6th or 7th attempt to flash a proper logo, suddenly I got a brick. Even the recovery mode doesn't boot (it used to work before).
Things I've already tried:
1. Tried putting a recovery image on the sdcard
2. Hold reset button during boot
3. Amlogic Burn Card Maker to prepare bootable sdcard
4. Tried flashing uboot on the sdcard using dd on Linux
tinyrick Hi. I have the same problem although I wasn't tinkering with this the box. One day it was working, next day it's gone. Doesn't reboot, doesn't start. Doesn't enter recovery mode even though it was able to boot into recovery before. I bought it from Geekbuying probably 4-5 months ago, installed apps and was disappointed by its performance. So I orefer d to wait for a solid firmware update and and never used it. It's so disappointing.
i haven't tried with images yet as I have feeling that it won't work.
1. I did hundreds of resets while pressing the reset button with no success.
2. Tried a different HDMI port.
3. Different HDMI cable.
4. Leave it for a day or 2 then connect it back to power.
5. Checked the transformer's output voltage and it was fine at 5.2V
5. I bought a universal charger with 5V and 2500mAh
But nothing worked. Once I connect it to power the blue light shines (I think it's dimmed a little bit), but nothing happens afterwards.
its so disappointing as my only hope left was to try the Amlogic card maker and trying to boot from SD card.
Have you got any success?! Did you reset any hardware pins?!
Hi guys, sorry for my bad English, but I'll try to explain my problem.
My brick box while it was running, with application es file explorer and then tried restarting, and got into bootloop.
I logged into recovry and did a wipe cache and wipe data factory reset.
That's when my problems started ...
The box has not started, only the blue led. I did the Usb burning tool flash and by the card maker, but the process stops at 7%.
I already tried several firmware and also boot recovery.img on the sd card, but it shows that the internal memory is 0MB.
Help me!! I lost my box?
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment