Unbrick 4k ultra H96PRO+ 3/32gb s912

[roerbakeitje]

Hello all . I whas stupid and flashed the wrong firmware . Now it's brickt . Led is burning but no signal. I also connected to a PC and that won't work .
There saying to sort pins. But what pins where?
And I need the good u-boot.ini file there say.Â*
Can someone give the good forum link there a 100 devices and I can't find the good one.

[roerbakeitje]

[mcdave]

I bet you have a grey screen when you boot....... it isn't really bricked in my opinion.

You should be good to follow this tutorial: I have used with success You have the 9377 chip so it will work

You will need a micro SD card and a card adapter to write the firmware from your computer to the micro SD card.

STEP 1 (download and extract).
Download
Burn Card Maker and Beelink GT1 Superceleron SCV8b Rom You can get the rom here: http://freaktab.com/forum/tv-player-...eleron-v8b-rom

Extract TF.rar and SCV8b-GT1.zip in the same folder.
Now you get Burn_Card_Maker.exe and SCV8b-GT1.img file.

Put a microSD card in your computer (on Windows) and go to the second step.

STEP 2 (make the microSD card)
Run Burn_Car_Maker.exe
The first time it's in chinese, click on the top lef menu, click on the second option, check English and put OK.
Close and restart Burn_Car_Maker.exe
Chose disk (Letter of your microSD card)
YES must be check 3 times for To Partition and Format, erase_flash and Reboot (erase_bootloader must be uncheck).
Click on Open and chose SCV8b-GT1.img
Click on Make, format the microSD card (default settings), after that the rom copy begin on the microSD card, when it's done you get a Success message.

STEP 3 (installation)
Now, insert the microSD card in the Beelink GT1 (power supply unplugoff).
Let your TV on and the HDMI cable plugged.
With a paper clip or other, press the reset button and hold it (small hole under the box), in the same time plug the power supply on the Beelink GT1.
The installation process begin, remove the paper clip and wait.

The above procedure worked for me a number of times. V8 is above example

Good Luck!

[trungk43]

My box is brick too, the board is similar. No signal to HDMI. I tried some methods to reflash rom but no luck

[trungk43]

I guest you need to contact two pins in board to force the board boot from sd card. Unfortunately, we don't which pins are here.

[trungk43]

My uart log, it seems stuck at AddrBus test


GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:0;POC:3;RCY:0; EMMC:0;READ:0;0.0;CHK:0;
TE: 43783

BL2 Built : 16:42:36, Nov 3 2016.
gxl g3eddb43 - xiaobo.gu@droid05

set vdd cpu_a to 1120 mv
set vdd cpu_b to 1050 mv
set vddee to 1000 mv
Board ID = 3
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 912MHz - FAIL
DDR4 chl: Rank0+1 @ 1008MHz - PASS
Rank0: 2048MB(auto)-2T-18
Rank1: 2048MB(auto)-2T-18
DataBus test pass!
GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:0;POC:3;RCY:0; EMMC:0;READ:0;0.0;CHK:0;
TE: 43791

BL2 Built : 16:42:36, Nov 3 2016.
gxl g3eddb43 - xiaobo.gu@droid05

set vdd cpu_a to 1120 mv
set vdd cpu_b to 1050 mv
set vddee to 1000 mv
Board ID = 3
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 912MHz - FAIL
DDR4 chl: Rank0+1 @ 1008MHz - PASS
Rank0: 2048MB(auto)-2T-18
Rank1: 2048MB(auto)-2T-18
DataBus test pass!

[trungk43]

Solved with this solution

http://freaktab.com/forum/tv-player-...x3-pro-bricked

[roerbakeitje]

‹trungk43  was this with the 4k ultra H96PRO+ ?

[trungk43]

My box is m8s plus ii, s912, 3gb ram, 32g emmc

[Lukaka]

I'm also interested. Any progress here?
I probably need the good u-boot.ini and factory image?

[Khalis]

Hi, my tv box also 4K Ultra HD H96 Pro+. Did flashed the recommended firmware as mentioned in ITEM#3, but after boot up everything, I noticed the current android version only able to detect 1GB of RAM instead of 3 GB that the hardware does has. Is it my RAM chip died already?.

[Cybergy]

I'd love to try this but the link to the Beelink GT1 Superceleron SCV8b Rom is dead. Kind of an important piece of the puzzle!