H96 PRO Plus - and other cool hardware mods

[Shonk]

I fitted an Odroid C1 heatsink to my H96 Pro+ with 3M 8815 Thermal tape
Its the new type H96 Pro+ top cover so it had a lip inside around 4mm that i had to shave off with a blade
Its actually touching the top of the case when closed up so its as tall as you could go for stealth

Its around 4 times the mass of the default silver heatsink that it came with

http://www.hardkernel.com/main/products/prdt_info.php?g_code=G141637555371

[wwmoggy]

This is the mod i want... What are the dimensions of the fat and the thin one?

the large one is 3" x 2" 1 1/2 tall with a copper core forget what it was from some old scrap computer

its Overkill average temp is 33 to 34C I never go over 35C

[chenrp]

This is the mod i want... What are the dimensions of the fat and the thin one?

[wwmoggy]

No i ment the other project...




What is the dimension of the fat and the thin blocks.

stacking them works I have the origanal heat sink sandwiched in between them then old scrap heatsink on top
28mm x 8mm Aluminum Xbox 360 RAM Memory Heat Sinks

http://www.****.com/itm/8pcs-Aluminu...-/281552767310

[chenrp]

No i ment the other project...

What is the dimension of the fat and the thin blocks.

[trebor]

They're not mine but they look 20 x 20 x 5...
Whatever fits should work,
or sit atop a laptop cooler

[chenrp]

All you need is one of the heatsinks shown in post

http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s912/alfawise/671891-h96-pro-plus-hardware-mods?p=673131#post673131

Few holes around the side of the box to allow circulation and some large rubber feet to get it up a little higher (5mm) job done easy.

What are the dimensions of your heatsink

[trebor]

All you need is one of the heatsinks shown in post

http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s912/alfawise/671891-h96-pro-plus-hardware-mods?p=673131#post673131

Few holes around the side of the box to allow circulation and some large rubber feet to get it up a little higher (5mm) job done easy.

[trebor]

More towards the glue not the heat sink ;-)

[chenrp]

If you want to stick a Heatsink this is the good stuff cost a few bucks and worth it.

Looks tiny and tall...
i think i can find better. From my measurements, we can fit 30x30mm heatsink with 0.7cm height

[trebor]

If you want to stick a Heatsink this is the good stuff cost a few bucks and worth it.

[chenrp]

I used double side tape on the usb connectors and a foam pad on the oposite side of the cpu to press the heat sink on it.

I couldn't fit any heatsink i have...not even an atom heatsink...

[chaveiro]

I used double side tape on the usb connectors and a foam pad on the oposite side of the cpu to press the heat sink on it.

[wwmoggy]

How did you managed to keep the heatsink in place and not falling to the sides...

silicone cgu paste and some Hotglue you do feel the heat in the top center running with a high temp of 32C now

[chenrp]

How did you managed to keep the heatsink in place and not falling to the sides...