Announcement

Collapse
No announcement yet.

[ROM] AlfaWise H96 PRO+ 3/16Gb - 3/32Gb - 3/64Gb - SCV7A 7.1.2 (DDR3/DDR4 and 9377 Wifi Chipset)

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • licquyd
    replied
    Anyone know if the VPN in the network connection works on this Firmware?

    Leave a comment:


  • swtilonas
    replied
    beelink gt1 ultimate solved the problem with fix.apk any apk for us?

    Leave a comment:


  • Poke668
    replied
    Originally posted by swtilonas View Post
    hi to all
    is there a fix for network location turning and turning ..........its about two months problem........no city accepted....Click image for larger version

Name:	IMG_0004.JPG
Views:	378
Size:	81.4 KB
ID:	761270
    Got the same problem.

    Leave a comment:


  • X92-2GB
    replied
    I donno... these cpus are designed to run hot. I have no issue running an oversized heat sink inside the box. Though it barly fits, and had to trim off wee tabs on the cover to allow it to close normally, and have the label still attached. For my use 54 degrees is max and the box doesnt feel that hot. I doubt having a box run below 50 for games is not worth the time and money as it would be just as quick in play.

    Leave a comment:


  • X92-2GB
    replied
    I bet its missing location permissions xml files. Also you need to set your location to gps+wifi to reset google play services to use location. If not set no apps using google api calls will fail to locate.

    also some firmwares are busted without phone gapps. I have to add missing apks from phone firmware to atv for google location and find my phone to work on my box.

    i found that most firmwares have the wrong play services installed. All phone /tablet based firmwares should have 404 not 204 as part of the product build number.

    also missing a few of the permissions xml files along with phone apks in the system priv-app folder. Once things are cleared up play services will push location from your device.
    Last edited by X92-2GB; 02-03-2019, 12:31.

    Leave a comment:


  • swtilonas
    replied
    hi to all
    is there a fix for network location turning and turning ..........its about two months problem........no city accepted....Click image for larger version

Name:	IMG_0004.JPG
Views:	378
Size:	81.4 KB
ID:	761270

    Leave a comment:


  • Luca
    replied
    Originally posted by rvelho View Post
    This rom works on tanix tx9 Pro ?

    I flash this rom on vorke z6 plus and it works perfectly. This is the best Rom I've tested.. Vorke Z6 Plus and TX9 Pro i think they are equivalent. (LPDDR3 Blue)..

    Bye

    Leave a comment:


  • huangda1982
    replied
    how do I install an ota zip? I tried preinstalled uptater and it reboot to twrp. and twrp says it has a bad zip format.

    Leave a comment:


  • lyubodelev
    replied
    Originally posted by rvelho View Post
    This rom works on tanix tx9 Pro ?
    Without wifi it should work...
    (SCV4 - blue).

    Leave a comment:


  • rvelho
    replied
    This rom works on tanix tx9 Pro ?

    Leave a comment:


  • Hybrydon
    replied
    [ROM] AlfaWise H96 PRO+ 3/16Gb - 3/32Gb - 3/64Gb - SCV7A 7.1.2 (DDR3/DDR4 and 9377 Wifi Chipset)

    Hello,
    Rom works correctly - is the most stable rom than other.
    The error I was able to detect:
    - No operating DTS - H96 PRO + 3 / 32Gb (BLUE (LPDDR3) PCB) connected to the Sony home cinema via HDMI. With corporate roms it worked.
    Celeron will there be a roma update and bug fix?
    Greetings,

    Leave a comment:


  • zugsat
    replied
    Originally posted by X92-2GB View Post

    That's the same box I have. I am surprised your box did not boot with the firmware I linked. It is what I am running now, with some minor mods. Try flashing with power connected. Once you get the connected notice in the flash tool, connect your power adapter to help feed extra power, also try a different usb port. Some may not flash proper, by flashing at a high speed, no more than USB 2.0 compatibility at best when flashing. There should not be any issues with flashing the firmware, in fact it is pretty darned fast once it is loaded and rebooted for the first time.
    Ok, the box is live again.

    SD card on the box with the firmware, hdmi connected, like a see in a video put something between pin 5-6 (don?t know if it worked), connect power, blue light, nothing happens, then I remember to press the reset button for a while and then the firmware starts loading :-)

    The other times i tried to load the firmware pressing reset and then power, until the blue light, worked.

    Regarding Bluetooth it seems that my gamed is damage. Very strange only a few hours of use :-(

    Regards
    Last edited by zugsat; 01-26-2019, 15:44.

    Leave a comment:


  • X92-2GB
    replied
    Originally posted by zugsat View Post

    No, I unmark the erase bootloader option. The stock rom on the link of freaktab when I flashed the box was strange, a lot of options missing.on settings.
    Then I try the rom of the gearbest web site, (where I buy the box), thats the one that didn't boot.
    My board is the S32-V6(LPDDR3) what is the correct rom for it? I think the ones I have try was the right ones.
    I have to buy a USB AA cable to try the recovery.
    SD card flash is what I was trying to do, nothing happens. Mask rom pin short method, is with the USB cable right?

    It?s a shame that superceleron rom is bad than the stock :-(
    That's the same box I have. I am surprised your box did not boot with the firmware I linked. It is what I am running now, with some minor mods. Try flashing with power connected. Once you get the connected notice in the flash tool, connect your power adapter to help feed extra power, also try a different usb port. Some may not flash proper, by flashing at a high speed, no more than USB 2.0 compatibility at best when flashing. There should not be any issues with flashing the firmware, in fact it is pretty darned fast once it is loaded and rebooted for the first time.

    Leave a comment:


  • zugsat
    replied
    Originally posted by X92-2GB View Post

    So you flashed by erasing bootloader? If your box doesn't boot you probably will need to try using a SD card flash or mask rom pin short method. Next time do not flash with erase boot loader on a firmware that is not made for your box. I assumed you knew if your box was lpddr3 or ddr3, v5 and v6 boards are lpddr3, v6.1 boards use stock rom only.
    No, I unmark the erase bootloader option. The stock rom on the link of freaktab when I flashed the box was strange, a lot of options missing.on settings.
    Then I try the rom of the gearbest web site, (where I buy the box), thats the one that didn't boot.
    My board is the S32-V6(LPDDR3) what is the correct rom for it? I think the ones I have try was the right ones.
    I have to buy a USB AA cable to try the recovery.
    SD card flash is what I was trying to do, nothing happens. Mask rom pin short method, is with the USB cable right?

    It?s a shame that superceleron rom is bad than the stock :-(

    Leave a comment:


  • huangda1982
    replied
    no audio pass through for Kodi? or I miss some settings?
    and how do I install an ota zip? I tried preinstalled uptater and it reboot to twrp.
    and, is there a working Amazon video app (playp in hd) for this rom?
    Last edited by huangda1982; 01-26-2019, 08:53.

    Leave a comment:

Working...
X