Announcement

Collapse
No announcement yet.

Alfawise H96 Pro+ Android 6.0, 3/32GB DDR3, Gig Lan, Dual WiFi and BT

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    Trebor,can you please discribe how to remove the heat sink? I have ordered a new heat sink,would it be better to stick it on top off the existing one? Thanks

    Comment


      #47
      Use a plastic device so you don't damage PCB,
      Lift around the edges should pop off easily, unless things have changed.
      Send a Image if you can so I can recall

      tЯeboЯ
      Please consider
      Donating to Freaktab

      Comment


        #48
        Trebor, as you have both boxes will this work ? New Custom Rom Yoka KB2 - SuperCeleron RC1 Rom. WiFi is not important for me. Don't want to brick it as their is know stock rom available to flash.
        Last edited by DNIZoid; 12-03-2016, 06:33.

        Comment


          #49
          I'll pick one up to check out, I'd like to see how the 3GB of RAM is.

          Comment


            #50
            looking at the photos of the motherboard do the two extra usb ports work ?. if so we could cut open some slots in the side of case to use them

            Comment


              #51
              tested the other two usb ports shows in photo on page one do work

              Comment


                #52
                Originally posted by DNIZoid View Post
                Do you have issue with kodi force closing all the time? Trebor
                in Kodi go to settings - Video Acceleration disable allow hardware acceleration amcodec then test
                if needed disable bottom line

                Comment


                  #53
                  Originally posted by wwmoggy View Post
                  tested the other two usb ports shows in photo on page one do work
                  I was just about to pull it apart again to test, forgot to last time
                  thanks for the info
                  tЯeboЯ
                  Please consider
                  Donating to Freaktab

                  Comment


                    #54
                    Originally posted by wwmoggy View Post

                    in Kodi go to settings - Video Acceleration disable allow hardware acceleration amcodec then test
                    if needed disable bottom line
                    Thanks

                    Comment


                      #55
                      [ATTACH=CONFIG]n615055[/ATTACH] [ATTACH=CONFIG]n615056[/ATTACH] [ATTACH=CONFIG]n615057[/ATTACH] cut out my port holes . also added vent holes top and bottom for cooling
                      Attached Files
                      Last edited by wwmoggy; 12-10-2016, 09:35.

                      Comment


                        #56
                        Those must have cost more then the box Manufactures cant spend that much on vents...
                        Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.

                        Comment


                          #57
                          Gearbest has offered a Firmware,
                          Unfortunately it also has the Previous Trojan backdoor thing on it. as mentioned here
                          Click image for larger version

Name:	nasty.jpg
Views:	1
Size:	21.6 KB
ID:	615073


                          Also Forgot to check previous version I was using, this one is dated 20161118
                          Click image for larger version

Name:	today.jpg
Views:	1
Size:	23.9 KB
ID:	615072

                          tЯeboЯ
                          Please consider
                          Donating to Freaktab

                          Comment


                            #58
                            thats the build on my box

                            Comment


                              #59
                              Ok thanks,
                              Now we have an Image it may get creatively Fixed/Cleaned and worked on, will just have to wait and see I feel
                              Good Mod also
                              tЯeboЯ
                              Please consider
                              Donating to Freaktab

                              Comment


                                #60
                                Oh crap i better order one lol.... 😁
                                Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.

                                Comment

                                Working...
                                X