Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

[ROM] New H96 Pro+ LP firmware 15-11-2019

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BoxPlay
    replied
    This IMG is for H96 Q9733 S912 3GB/32GB LPDDR V5. V6 and V6.1 Bootfix, RamFix and more, so it can be flashe on a SD-Card.
    Just use burn card maker and then boot your box by holding the reset button and plug in the power, keep holding the reset button until you se the upgrading message.

    https://mega.nz/file/tCdWUYQa#5Rassf...cTWaHv4Zgsibdo

    I made this firmware and it works perfect.

    I have also made some IMG with different firmwares for H96 V2.2 V3.

    https://mega.nz/file/gS0h0TwI#Kq3Szi...zgZZqydq8Ak9go
    Attached Files

    Leave a comment:


  • BoxPlay
    replied
    Do you stil have this ROM file? The link is not working

    Leave a comment:


  • asif javaid
    replied
    HELLO SIR I NEED SOFTWARE H96PRO PLUS WITH DRIVER

    Leave a comment:


  • krzychc
    replied
    Hi, my H96 pro plus V1.0 bricked, please tell me which the pins on the board that needs to be shortened.

    Leave a comment:


  • ashpkl03
    replied
    Originally posted by NTAHS View Post


    The highlighted area worked for me. Not sure exactly which pin. GENTLY shortcut these pins with a screw driver or sth. Put enough pressure to bridge them but not too much because you might break them. It takes patience. The ones with sth black in between are your best bet
    Thanks NTAHS,
    I shall try with your details.

    Leave a comment:


  • NTAHS
    replied
    Originally posted by ashpkl03 View Post

    Hi,
    NTAHS, i also entered into the same bricked position, my android tv box h96 pro+ is hard bricked and not getting detected in the system. My box PCB board is same as yours ZH01-S912(LPDDR3)-TVBOX-V1.0. Please tell the pins on the board that needs to be shortened. Attaching pics of the box.

    The highlighted area worked for me. Not sure exactly which pin. GENTLY shortcut these pins with a screw driver or sth. Put enough pressure to bridge them but not too much because you might break them. It takes patience. The ones with sth black in between are your best bet
    You may only view thumbnails in this gallery. This gallery has 1 photos.

    Leave a comment:


  • ashpkl03
    replied
    Originally posted by NTAHS View Post
    Thank you for your reply. I called it hard brick since there was no response and no light when connecting to power. Anyway fortunately I managed to find the pins and recover my box with original firmware and then successfully flashed Atvxperience v2h LPDDR3 version:
    Hi,
    NTAHS, i also entered into the same bricked position, my android tv box h96 pro+ is hard bricked and not getting detected in the system. My box PCB board is same as yours ZH01-S912(LPDDR3)-TVBOX-V1.0. Please tell the pins on the board that needs to be shortened. Attaching pics of the box.
    You may only view thumbnails in this gallery. This gallery has 2 photos.

    Leave a comment:


  • waldiwaldi
    replied
    thx

    Leave a comment:


  • miziou
    replied
    Originally posted by waldiwaldi View Post

    Please link Aml_s912_7.1_H96PROPLUS_mac_LP_20180824?

    Leave a comment:


  • waldiwaldi
    replied
    Originally posted by miziou View Post

    This Play Store is bugging me - I tried to install updated one over it, but the system didn't let me.
    I also played with GApps - same conclusion as yours.
    And of course, one can use Aptoide, APKPure or even ACMarket - but I'm going lazy lately and Play Store became essential for my well-being

    I'll try to tinker with it when I have some time - as for now I went back to 20180824.

    But in the end when I come to think of it, I'm quite surprised by the fact that a new rom version came out - even if it's test-keys
    Please link Aml_s912_7.1_H96PROPLUS_mac_LP_20180824?

    Leave a comment:


  • Taiada
    replied
    Originally posted by ReaperMan View Post
    I think this may be the original link..otherwise Google around.



    PM, I will try to send to you.
    Thanks for ROM

    Leave a comment:


  • ReaperMan
    replied
    I think this may be the original link..otherwise Google around.



    PM, I will try to send to you.

    Leave a comment:


  • Taiada
    replied
    Originally posted by miziou View Post

    This Play Store is bugging me - I tried to install updated one over it, but the system didn't let me.
    I also played with GApps - same conclusion as yours.
    And of course, one can use Aptoide, APKPure or even ACMarket - but I'm going lazy lately and Play Store became essential for my well-being

    I'll try to tinker with it when I have some time - as for now I went back to 20180824.

    But in the end when I come to think of it, I'm quite surprised by the fact that a new rom version came out - even if it's test-keys
    Please link Aml_s912_7.1_H96PROPLUS_mac_LP_20180824?
    Thanks

    Leave a comment:


  • ReaperMan
    replied
    LOL, I restored TWRP 20180824 system files onto this firmware...some apps had to reinstall for proper setup...so a "Freakinstein" setup now.

    Leave a comment:


  • miziou
    replied
    Originally posted by ReaperMan View Post
    Installed aml_s912_7.1_H96PROPLUS_mac_LP_20191115 on a CZ-S32-v6.
    • Play Store is borked (on purpose by original dev?) Apps must be side loaded! Paid apps work but are not seen by Play Store.
    • Play Store manual update fails.
    • Updating Play Services does install...leading to cascade paid-apps failure!
    Installing GAPPS fails. Warning incompatible api22. This is Android 5.1.1 Lollipop SDK 22 system files.

    Might be fine for anyone who has no use for the Google Play Store experience...
    There are other mods that strip these services out.

    On a positive note...this is why its called testing!
    Thousands of Apks and countless Firmwares.

    Keep the firmwares coming!
    This Play Store is bugging me - I tried to install updated one over it, but the system didn't let me.
    I also played with GApps - same conclusion as yours.
    And of course, one can use Aptoide, APKPure or even ACMarket - but I'm going lazy lately and Play Store became essential for my well-being

    I'll try to tinker with it when I have some time - as for now I went back to 20180824.

    But in the end when I come to think of it, I'm quite surprised by the fact that a new rom version came out - even if it's test-keys

    Leave a comment:

Working...
X