Hi, all USB ports on GS king pro and it's remote control stop working. I can't navigate at all, I did a full reset but still every mouse/keyboard/track pads I plug in the ports does the work. Is this a hardware issue or can installing a wrong recovery. img do this? Thank you.
-
-
If you have a male to male USB cable, try connecting the box to a computer to check if the computer recognizes the box.
Or try flashing a stock ROM through the SDcard method. -
ThanksOriginally posted by TheBlackening View Post
???The USB is to PC is throwing error messages like "device unrecognized etc" as was trying to flash new firmware via USB burning tools. Even pressing the reset pin hole button underneath the GS king pro.
Haven't tried the SDcard method so I'll give it a try and report back.
Comment
-
Hopefully it's just a windows incompatibility, but, I'm sorry to say it's not looking good so far.
Good luck on the sdcard method, i hope it works. Good luck.Comment
-
That's what I'm fearing that it's hardware failure ?Originally posted by TheBlackening View PostComment
-
The SDcard updated it but still no USB/remote control function. Looks like a hardware failure. ?Originally posted by TheBlackening View PostComment
-
It looks like it ?
Daaaamn... ?Comment
-
Yes unless you have another suggestion it is going in the bin.Originally posted by TheBlackening View PostComment
-
Right now the only thing that occurs to me is opening it and take a look at the electronics on the board to see if there are any obvious faults, for example, any burned capacitor, which would be an easy fix at a electronics repair shop.Comment
-
OK will try that, do you or anybody know how to open it up?Originally posted by TheBlackening View PostComment
-
There may be videos of that on YouTube.
I found one but it's in Brazilian
Comment
There are currently 11823 users online. 6 members and 11817 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Comment