Unconfigured Ad Widget



No announcement yet.

GS1_103N0 (2G+16G)

  • Filter
  • Time
  • Show
Clear All
new posts

    GS1_103N0 (2G+16G)

    Hi dear , here comes the firmware for GS1_103N0 !

    Current version : GS1_103N0
    Based on : GS1_101N0/GS1_102N0

    USB zip :(update_GS1_103N0.img):


    SD card zip : (ota_GS1_103N0.zip):


    usb burning tool :


    USB updating :

    1. Install the allwinner USB burning tool first ;
    2. Click the PhoenixUSBPro.exe in your desktop and run it ;
    3. Click the upper left button to load the firmware file from your pc ;
    4. Click the lunch button on this interface ;
    5. Hold the reset hole and then connect with the computer and tv box , you should keep in mind that the USB2.0 is used for updating but USB3.0 . after that , it is a recognization sign that the red X ( upper right corner)turns green .
    6. Finish this updating .

    Improvement :

    1. We solved the problem that the rigion area on UI gets a crash ;

    2. The wifi bugs of allwinner have been removed ;

    4. You can copy what you want in Bee Files Explorer quickly ;

    5. The fisher joy app has been removed ;

    PS :Now you can update from the GS1 101N0 to GS1 103N0 with SD card also .

    SD card updating :

    1. copy this file (ota_GS1_101N0.zip) to your TF card or U-disk and then insert the TV box ;
    2. go in the setting > click the option of "about the media" > choose the first option > choose file > load the ota_GS1_101N0.zip ;
    3. the systen will recognize this update zip automatically when you run it well and then shut down to go in the update mode , you need to make sure that Power
    supply must be firmly good enough to finish this updating , power outages would contribute to a failure .
    you can contact with me if you meet some problems .
    email / skype : +86 18772960513[email protected]

    Last edited by Beelink; 12-01-2017, 08:12.

    Please solve the problem with mouse cursor movement. The cursor continuously flickering and can't use in screen edges. When using the trackpad of Logitech K400+ the problem is higher. Thanks.


      FIRMWARE updated to the latest version, settings restored to factory settings - the MIRACAST function does not work on any of my devices. At home I use SAMSUNG S4 ACTIVE (official ROM ANDROID 5.X), SAMSUNG S4 ACTIVE (LineageOS 15 - OREO) and HUWAEI HONOR (officiall Android 6.0). After starting the application, miracast finds (not always devices) links, then the screen the blinks are getting black as the image transfer was supposed to start and re-start trying to connect ...

      This is the basic function for which you purchased the device, and it does not work, please help and advice.