Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

GS1_104N0 (2G+16G)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS1_104N0 (2G+16G)

    Hi dear , here comes the firmware for GS1_104N0 !
    Current version : GS1_104N0
    Based on : GS1_101N0/GS1_103N0

    USB zip :(update_GS1_104N0.img):



    later

    SD card zip : (ota_GS1_104N0.zip):

    later

    usb burning tool :


    https://beelink-my.sharepoint.com/pe...oSJv8&e=jb7TWh


    Improvement :


    1. Sometimes some errors occur to this device when the frame rate is not consistent with HDMI output frequency ,

    such as image trembles often . now you
    can solve this problems with a method , some tips as follows ,

    Settings->advanced display >(√) Playback auto switch FPS

    PS : It may get a black screen briefly .

    2. Kodi can perform much more better than before .

    3. Some shortcuts have been added to remote for popular demands , as the picture shows,





    4. Google chrome has been reinstalled for you .

    5. You could get more wonderful experience on dolby and dts .

    PS :Now you can update this device from the GS1 101N0 to GS1 103N0 with SD card also .

    USB updating :

    1. Install the allwinner USB burning tool first 。


    2. Click the PhoenixUSBPro.exe in your desktop and run it .

    3. Click the upper left button to load the firmware file from your pc ;4. Click the lunch button on this interface .

    5. Hold the reset hole and then connect with the computer and tv box , you should keep in mind that the USB2.0

    is used for updating but USB3.0 . after that , it is a recognization sign that the red X ( upper right corner)turns

    green .

    6. Finish this updating .


    SD card updating :

    1. copy this file (ota_GS1_101N0.zip) to your TF card or U-disk and then insert the TV box .

    2. go in the setting > click the option of "about the media" > choose the first option > choose file >

    load the ota_GS1_101N0.zip .

    3. the systen will recognize this update zip automatically when you run it well and then shut down to go in the update

    mode , you need to make sure that Power supply must be firmly good enough to finish this updating , power outages

    would
    contribute to a failure .

    you can contact with me if you meet some problems .

    email : [email protected] / skype : +86 18772960513
    Last edited by Beelink; 01-18-2018, 11:21.
Working...
X