Hi dear friend , here comes the firmware for GS1_106N0 !
Current version : GS1_106N0
Based on : GS1_104N0/GS1_105N0
USB zip :（update_GS1_106N0.img）：
https://beelink-my.sharepoint.com/:f:/g/personal/firmwareservice_beelink_onmicrosoft_com/EuOR69l5sy9HqwRVwUfakyIBoic5pZdeOKvQNFqJtSO-bg?e=MmzbSc
SD card zip : （ota_GS1_106N0.zip）：
https://beelink-my.sharepoint.com/:f...q-kQQ?e=Si06dv
USB burning tool :
Improvement :
1. The google play store comes back to normal .
2. OTA has been available for you .
PS ：Now you can update from the GS1 101N0 to GS1 106N0 with SD card also .
USB updating :
1. Install the allwinner USB burning tool first ;
2. Click the PhoenixUSBPro.exe in your desktop and run it ;
3. Click the upper left button to load the firmware file from your pc ;4. Click the lunch button on this interface ;
5. Hold the reset hole and then connect with the computer and tv box , you should keep in mind that the USB2.0 is used for updating but USB3.0 . after that , it is a recognization sign that the red X ( upper right corner）turns green .
6. Finish this updating .
SD card updating :
1. copy this file (ota_GS1_101N0.zip) to your TF card or U-disk and then insert the TV box ;
2. go in the setting > click the option of "about the media" > choose the first option > choose file > load the ota_GS1_101N0.zip ;
3. the systen will recognize this update zip automatically when you run it well and then shut down to go in the update mode , you need to make sure that Power
supply must be firmly good enough to finish this updating , power outages would contribute to a failure .
you can contact with me if you meet some problems .
email : [email protected] / skype : +86 18772960513
Current version : GS1_106N0
Based on : GS1_104N0/GS1_105N0
USB zip :（update_GS1_106N0.img）：
https://beelink-my.sharepoint.com/:f:/g/personal/firmwareservice_beelink_onmicrosoft_com/EuOR69l5sy9HqwRVwUfakyIBoic5pZdeOKvQNFqJtSO-bg?e=MmzbSc
SD card zip : （ota_GS1_106N0.zip）：
https://beelink-my.sharepoint.com/:f...q-kQQ?e=Si06dv
USB burning tool :
Improvement :
1. The google play store comes back to normal .
2. OTA has been available for you .
PS ：Now you can update from the GS1 101N0 to GS1 106N0 with SD card also .
USB updating :
1. Install the allwinner USB burning tool first ;
2. Click the PhoenixUSBPro.exe in your desktop and run it ;
3. Click the upper left button to load the firmware file from your pc ;4. Click the lunch button on this interface ;
5. Hold the reset hole and then connect with the computer and tv box , you should keep in mind that the USB2.0 is used for updating but USB3.0 . after that , it is a recognization sign that the red X ( upper right corner）turns green .
6. Finish this updating .
SD card updating :
1. copy this file (ota_GS1_101N0.zip) to your TF card or U-disk and then insert the TV box ;
2. go in the setting > click the option of "about the media" > choose the first option > choose file > load the ota_GS1_101N0.zip ;
3. the systen will recognize this update zip automatically when you run it well and then shut down to go in the update mode , you need to make sure that Power
supply must be firmly good enough to finish this updating , power outages would contribute to a failure .
you can contact with me if you meet some problems .
email : [email protected] / skype : +86 18772960513
Comment