update error 0x10105002 gt1 ultimate

[palluck]

Hi,
I have a bellink gt1 ultimate g912 (wifi 9377).
The stock firmware on board was 311, I update to 313 by ota.
The box works regularly but now I want update to android 7 and I will try the custom firmware. I download this firm ware https://beelink-my.sharepoint.com/pe..._NWz38E5fpMOq0.
I try update by USB_Burning_Tool (I try 2.07.2, 2.0.8 and 2.0.9), I change 2 pc and 2 usb cable but but I can not upgrade the box.
I follow this instructions: https://www.youtube.com/watch?v=m8ch...ature=youtu.be
I have always this error (to 2%):

[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error

The box work regularly

Help me please

[Pitelasssss]

1st you have to flash 7.1 stock firmware and then you can install custom firmware 7.1

Enviado do meu SM-N910F através de Tapatalk

[Pitelasssss]

( in my opinion. ..)

Enviado do meu SM-N910F através de Tapatalk

[Pitelasssss]

If you flash both stock firmware I think you don't have problems

Enviado do meu SM-N910F através de Tapatalk

[Pitelasssss]

Uncheck erase bootloader
Very important

Enviado do meu SM-N910F através de Tapatalk

[Pitelasssss]

Use the usb port beside microsdcard

Enviado do meu SM-N910F através de Tapatalk

[palluck]

Thanks for help
I am trying to flash this firmware https://beelink-my.sharepoint.com/pe..._NWz38E5fpMOq0.
I use the usb port beside microsdcard but the process stopped always to 2%, also when unched erase bootloader

[Pitelasssss]

Select the .Img
Select Start
Reset button and insert the usb cable


Enviado do meu SM-N910F através de Tapatalk

[palluck]

Reset button and insert the usb cable, do I have to do it right?

[Pitelasssss]

Try

Enviado do meu SM-N910F através de Tapatalk

[gefattern]

Hi to all ,

i really can not understand that AML Boards must be flashed in so many different Ways !!! .

Why not one Method for all AML Boards ??? nice Day to all / gefattern

[palluck]

I've tried it by following this guide: https://www.youtube.com/watch?v=m8ch...ature=youtu.be.
does not work

[palluck]

I resolved with new usb cable, it's ok

[rafiki]

Hi,
I had same error ([0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error) while trying to flash my GT1 Ultimate. While flashing, box was connected only via USB to PC, no power supply, no nothing. Then I connected power supply to box, and that solved the problem. Obviously, box wasn't getting enough power via USB.

BR

[Palatkik]

Uncheck erase bootloader
Very important

Enviado do meu SM-N910F através de Tapatalk

I am having problem flashing from Android 6 > Android 7 using a PC with message:
DeviceID Time Result
HUB4-2 2017-09-18 15:12:44 201 [0x00101004]Erase bootloader/Lowper/Indentify/Error result

but the Beelink Youtube video says erase bootloader should be checked on - which is what I did? I get the above message after about 2% processing from start. Is this a power issue??? Please help thanks.