[ROM] Beelink SEA I - 16Gb/32Gb Versions - SCV3 Beta

[superceleron]

Hi there guys and girls, one more rom/fw for you all!
Many thks to gearbest for sending me the device to play
Many Thks to my beta testers trebor

READ THE BUGS SECTION FOR UNNECESSARY QUESTIONS!!!!

Changelog Beta V3:

• Based on latest 105.
• Added status bar auto hide.
• Ftmc 16.2.29
• Updated su to 2.81 (no still no supersu app... its blocked its install in the source)
• And all the rest of previous roms.

Tweaks Beta V3:

• SAME TWEAKS AS V1

---

Changelog Beta V2:

• Based on latest 103 OTA.
• Reorganized some apps and some links in the launcher!
• Cast working ( it may not work the 1º time, but 2º time should work just fine )
• Fixed manual resolution change ( Bug added in the latest OTA )
• Removed Google remote control ( Sorry it was crashing and i could not fix it )
• FTMC Build 26 ( I do recommend using external player for it, simple install mx player and mx armv7 neon codec from playstore, run mx player and enable HW+ dont touch anything else and close it, execute FTMC and then close it, open "total commander" and go to internal storage "Android/data/org.xbmc.ftmc/files/.ftmc/userdata" and put this file ( Click Here ) in there, close total commander and that is it, from now on mx player is used ONLY FOR LOCAL files, smb, internet files and streams are played by FTMC internal player... if you want to change that simple edit the file above to your needs... BTW FTMC MAKES TRANSPARENT THE USE OF EXTERNAL PLAYER NO NEED TO PRESS "OK'S" LIKE NORMAL KODI OR SPMC)
• All other stuff from V1

Tweaks Beta V2:

• SAME TWEAKS AS V1

Bugs Beta V2:

• No SuperSU app since is installation is blocked in the sdk!
• When wake up from sleep mode the display take some time to come back... dont worry it will turn on...
• 1º time open any app it may take a few secs, this is how this sdk work...
• Its takes time for the wifi to get the ip.. so wait...
• HDCP remove only on the output no on the in input, for that you guys need someone to "hack" the hdmi in app!
• Sometimes after power on you even if it says that is connect to the wifi of eth it dont have internet, reboot the box and it should be ok after that!
• SPMC crashes, so dont install it!
• Possible lot more Bugs...

---

Changelog Beta V1:

• Based on stock 102.
• Removed HDCP key check ( No more "Missing HDCP Key" problem )
• General optimization.
• Changed governor from "ondemand" to my custom "interactive" one
• Suspend mode fixed!
• Enable by default samba!
• OpenWrt samba optimization.
• OpenWrt transmission start fix
• Custom Wetek WebOs launcher (Many thks to wetek for let me use it)
• - Menu Button is king on this launcher, its used to add remove icons on the main screen, also to remove widgets.
• - Long press on the default icons on desktop you can change them to other apps (White Logos...)
• - Long press on the icons you add to the deskop and you can rearrange them.
• Live Wallpapers, From Android TV ( Read Tweaks Section on how to enable it )
• Android TV remote control! ( download the app from playstore to your phone )
• Netflix, youtube, playstore...etc... fully working ( No 4k Youtube, that is exclusive of Android TV roms )
• initd.d support.
• Xbox360 Gamepad Wired and Wireless support.
• Playstore updated!
• Permissions fixed.
• Added Xposed Framework
• FTMC Build 24
• Permissive mode!
• Added a few apps... included the zidoo "Hdmi Deception" it should work but i don't a way to test it!
• And some other little stuff...

Tweaks Beta V1:

• 1. Settings - Developer options - Stay awake - OFF.
• 2. Setting - Display - Daydream - ON - the upper right corner of the three points - When to daydream - While charging.
• 3. Setting - Display - Daydream - select "Backdrop"
• 4. Setting - When to daydream - choose the time after which screen saver turns on.
• If Setting - Display - Daydream - OFF, after a specified time tv-box will go into standby mode

Bugs Beta V1:

• No SuperSU app since is installation is blocked in the sdk!
• When wake up from sleep mode the display take some time to come back... dont worry it will turn on...
• 1º time open any app it may take a few secs, this is how this sdk work...
• Its takes time for the wifi to get the ip.. so wait...
• HDCP remove only on the output no on the in input, for that you guys need someone to "hack" the hdmi in app!
• In the 1º usage of the playstore it needs to update google services, so dont forget to do it!
• Sometimes after power on you even if it says that is connect to the wifi of eth it dont have internet, reboot the box and it should be ok after that!
• No Navigation Bar, notification bar cant be hidden also!
• SPMC crashes, so dont install it!
• Possible lot more Bugs...

---

Want to buy me a beer?

• Donation Link Press Here

Download:

• DOWNLOAD HERE SCV3 for the Beelink SEA 2/32GB
• MD5: 04688F8BDDD8BC6A681D1B9A9FE99272
• DOWNLOAD HERE SCV3 for the Beelink SEA 2/16GB
• MD5: F7442371AB483E2DC962C2D5F28E3E8A

Install instructions:

• Read beelink instructions

Where to buy:

• You can buy the Beelink SEA I 2GB/32GB Here at Gearbest
• You can buy the Beelink SEA I 2GB/16GB Here at Gearbest

1º BOOT MAY TAKE AROUND 6 MINUTES MAYBE LESS!

THIS ROM DELETES ALL YOUR DATA SO DO A BACKUP!

USE AT YOUR OWN RISK!

Enjoy it!

[KAA]

download now.....

[KAA]

error.... need to keyin *.bin

[trebor]

What version burning tool
Use the first one not the key one

[superceleron]

Do this.... press "show info dlg" and in there change from "write factory" to "only upgrade firmware" open the img again and then close the app and open it again and load the img then connect the box and wait...

[KAA]

Mouse more responsive compare to stock firmware but not as good GT1
overall better than stock...
now no more door stopper at my room...

missing bottom navigation...

[superceleron]

Ok guys who downloaded plz re download... i upped another rom, same name but i fixed openwrt access with eth...
And tweaked a bit more my custom governor!

[spawn_lmg]

error.... need to keyin *.bin

open System.ini in usb_tool dir. Change
WRITE FACTORY=0
ONLY UPGRADE FIRMWARE=1

[blinkone]

Thanks for the fast release of this custom rom superceleron,

Installed without issue Having a play now just added my own wallpaper and a few apps to the home screen.





What's the superceleron button for on the bottom left hand corner.

Oh the browser button on the stock remote don't work.

Donation on the way Thanks for all your time here

[superceleron]

Glad you like it m8
The superceleron button is only a signature dont do nothing
About the browser button, need to check it
Btw thks for the donation

[blinkone]

Glad you like it m8
The superceleron button is only a signature dont do nothing
About the browser button, need to check it
Btw thks for the donation

No worries mate,Keep up the good work

Just an idea for the superceleron button,Maybe link it to your blog or the freaktab rom download

[superceleron]

that is a nice idea, i will try add it but is hard since i dont have the source of it

[jerry98vert]

Sorry superceleron but I got to ask. There is no mention of lighthome launcher......So can the original Beelink lighthome launcher work, meaning will the big Kodi button work instead of the HDMI big button? And/or is the new lighthome launcher still in your new rom?

thanks for you hard work, as always!

[KAA]

no SPMC for SEA I

[superceleron]

Sorry superceleron but I got to ask. There is no mention of lighthome launcher......So can the original Beelink lighthome launcher work, meaning will the big Kodi button work instead of the HDMI big button? And/or is the new lighthome launcher still in your new rom?

thanks for you hard work, as always!

its not in mine...
if i have some free time i will make a kodi logo version and upped here!

no SPMC for SEA I

No SPMC dont work on SEA... Dunno why since i dint debug it!