can we add a new gamepad to android support?

[gogeta]

here are the gamepads

https://www.amazon.com/iNNEXT-Nintendo-Controller-Gamestick-Raspberry/dp/B01N7ANDLC

and heres the info I got on it when plugged into a windows pc


=========================== USB Port6 ===========================

Connection Status : 0x01 (Device is connected)
Port Chain : 3-6
Properties : 0x01
IsUserConnectable : yes
PortIsDebugCapable : no
PortHasMultiCompanions : no
PortConnectorIsTypeC : no

======================== USB Device ========================

+++++++++++++++++ Device Information ++++++++++++++++++
Device Description : USB Input Device
Device Path : \\.\usb#vid_0079&pid_0011#5&297258bb&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Device ID : USB\VID_0079&PID_0011\5&297258BB&0&6
Hardware IDs : USB\VID_0079&PID_0011&REV_0106 USB\VID_0079&PID_0011
Driver KeyName : {745a17a0-74d3-11d0-b6fe-00a0c90f57da}\0014 (GUID_DEVCLASS_HIDCLASS)
Driver : \SystemRoot\System32\drivers\hidusb.sys (Version: 10.0.15063.0 Date: 2017-03-18)
Driver Inf : C:\Windows\inf\input.inf
Legacy BusType : PNPBus
Class : HIDClass
Class GUID : {745a17a0-74d3-11d0-b6fe-00a0c90f57da} (GUID_DEVCLASS_HIDCLASS)
Interface GUID : {a5dcbf10-6530-11d2-901f-00c04fb951ed} (GUID_DEVINTERFACE_USB_DEVICE)
Service : HidUsb
Enumerator : USB
Location Info : Port_#0006.Hub_#0003
Location IDs : PCIROOT(0)#PCI(1400)#USBROOT(0)#USB(6), ACPI(_SB_)#ACPI(PCI0)#ACPI(XHC_)#ACPI(RHUB)#ACPI(H S06)
Container ID : {c790d7b4-ca37-11e7-95a6-bc5ff4f9e585}
Manufacturer Info : (Standard system devices)
Capabilities : 0x84 (Removable, SurpriseRemovalOK)
Status : 0x0180600A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_REMOVABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
Problem Code : 0
Power State : D0 (supported: D0, D3, wake from D0)
Child Device 1 : HID-compliant game controller
Device ID : HID\VID_0079&PID_0011\6&379B9A&0&0000
Class : HIDClass

---------------- Connection Information ---------------
Connection Index : 0x06 (6)
Connection Status : 0x01 (DeviceConnected)
Current Config Value : 0x01
Device Address : 0x06 (6)
Is Hub : 0x00 (no)
Number Of Open Pipes : 0x01 (1)
Device Bus Speed : 0x00 (Low-Speed)
Pipe0ScheduleOffset : 0x00 (0)

--------------- Connection Information V2 -------------
Connection Index : 0x06 (6)
Length : 0x10 (16 bytes)
SupportedUsbProtocols : 0x03
Usb110 : 1 (yes)
Usb200 : 1 (yes)
Usb300 : 0 (no)
ReservedMBZ : 0x00
Flags : 0x00
DevIsOpAtSsOrHigher : 0 (Is not operating at SuperSpeed or higher)
DevIsSsCapOrHigher : 0 (Is not SuperSpeed capable or higher)
DevIsOpAtSsPlusOrHigher : 0 (Is not operating at SuperSpeedPlus or higher)
DevIsSsPlusCapOrHigher : 0 (Is not SuperSpeedPlus capable or higher)
ReservedMBZ : 0x00

---------------------- Device Descriptor ----------------------
bLength : 0x12 (18 bytes)
bDescriptorType : 0x01 (Device Descriptor)
bcdUSB : 0x100 (USB Version 1.00)
bDeviceClass : 0x00 (defined by the interface descriptors)
bDeviceSubClass : 0x00
bDeviceProtocol : 0x00
bMaxPacketSize0 : 0x08 (8 bytes)
idVendor : 0x0079
idProduct : 0x0011
bcdDevice : 0x0106
iManufacturer : 0x00 (No String Descriptor)
iProduct : 0x02 (String Descriptor 2)
Language 0x0409 : "USB Gamepad "
iSerialNumber : 0x00 (No String Descriptor)
bNumConfigurations : 0x01 (1 Configuration)

------------------ Configuration Descriptor -------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x02 (Configuration Descriptor)
wTotalLength : 0x0022 (34 bytes)
bNumInterfaces : 0x01 (1 Interface)
bConfigurationValue : 0x01 (Configuration 1)
iConfiguration : 0x00 (No String Descriptor)
bmAttributes : 0x80
D7: Bus Powered : 0x01 (yes)
D6: Self Powered : 0x00 (no)
D5: Remote Wakeup : 0x00 (no)
D4..0: Reserved, set 0 : 0x00
MaxPower : 0x32 (100 mA)

---------------- Interface Descriptor -----------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x04 (Interface Descriptor)
bInterfaceNumber : 0x00
bAlternateSetting : 0x00
bNumEndpoints : 0x01 (1 Endpoint)
bInterfaceClass : 0x03 (HID - Human Interface Device)
bInterfaceSubClass : 0x00 (None)
bInterfaceProtocol : 0x00 (None)
iInterface : 0x00 (No String Descriptor)

------------------- HID Descriptor --------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x21 (HID Descriptor)
bcdHID : 0x0110 (HID Version 1.10)
bCountryCode : 0x21 (33 = US)
bNumDescriptors : 0x01
Descriptor 1:
bDescriptorType : 0x22 (Class=Report)
wDescriptorLength : 0x0065 (101 bytes)
Error reading descriptor : ERROR_INVALID_PARAMETER

----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x81 (Direction=IN EndpointID=1)
bmAttributes : 0x03 (TransferType=Interrupt)
wMaxPacketSize : 0x0008
bInterval : 0x0A (10 ms)

-------------------- String Descriptors -------------------
------ String Descriptor 0 ------
bLength : 0x04 (4 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language ID[0] : 0x0409 (English - United States)
------ String Descriptor 1 ------
bLength : 0x24 (36 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "DragonWind Inc. " *!*CAUTION trailing space characters
------ String Descriptor 2 ------
bLength : 0x1A (26 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "USB Gamepad " *!*CAUTION trailing space character
----- String Descriptor 0xEE -----
bLength : 0x1A (26 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "USB Gamepad " *!*CAUTION trailing space character

[gefattern]

Hi ,

what Device do you have and did you already tried to play with them ???

greetings / gefattern

[gogeta]

tried it on a Mecool M8S Pro L with Magendanz android tv rom
controller doesn't do anything

[gefattern]

Hi ,

first , please not make double Topics , in different Sections , okay ??? , had to delete it ,

did you test it with some Emulators Apps and Games or how ???

greetings / gefattern

[gogeta]

tried retroarch and just in the android gui
what info is needed to get it working?...was the stuff I posted not enough?

[gefattern]

Hi ,

i am not sure , because i am no Pro in that , there are ways to add Gamepad commands to

stock Keylayout Files , somwhere here and an App that shows the Input of the Gamepad ,

with this you can then modify the Keylayout File , have to look and search , come back later .

greetings / gefattern

[gefattern]

tried retroarch and just in the android gui
what info is needed to get it working?...was the stuff I posted not enough?

Hi ,

look at this Page , maybe it helps :

http://freaktab.com/forum/development-area/rom-hacks-and-mods-development/545581-adding-controller-and-various-hid-support-to-roms-thread-work-in-progress

good luck / gefattern