live TV for all rk3188 using XBMC and tvheadend

[taki]

1. signal weakness is no problem. have to manuel add muxess later searching. all channels found and remap. (but this method hard too) 2. HD channel found but not playing smoothly. not watch able. pls photos and read log. I think that 1. chipset of usb not connected or supported 480mbs. HD channel 12-25 mb/s (usb 2.0 enough for HD and 2k) 2. Driver not work properyl. 3. Minix android codech not support ts video etc

I think that not support hd channel (libdvbcsa is a free implementation of the DVB Common Scrambling Algorithm - DVB/CSA ) libcrypto.so and libssl.so

[sam321]

I think that not support hd channel (libdvbcsa is a free implementation of the DVB Common Scrambling Algorithm - DVB/CSA ) libcrypto.so and libssl.so

surely that cannot be the problem, as they are only used for accessing payed channels

[taki]

surely that cannot be the problem, as they are only used for accessing payed channels

I had some experiences with my phone samsung s3. I used

http://www.tbsdtv.com/download/document/tbs2900/TBS%20MOI%20DVB-S2%20Streaming%20Box_TVHguid_V1.1.pdf

I setup tvHguide.apk
I connect tvheadent with my phone to minix x7. sd channelp perfect playing. HD channel flawless playing. I think dont support mpeg4 ts or h264 ts minix firmware.

[taki]

I searched auto network scaning. found and map dvb services. connec to XBMC some channel work some channels (no services enabled) dont work. I looked terminal

u0_a45@android:/ $ su
root@android:/ # dmesg | grep dvb
<6>[ 68.766840] dvb-usb: found a 'SU3000HD DVB-S USB2.0' in warm state.
<3>[ 68.766966] dvb-usb: bulk message failed: -1 (2/0)
<6>[ 68.767686] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
<6>[ 68.774053] dvb-usb: MAC address: 00:af:78:66:66:52
<3>[ 68.778516] dvb-usb: bulk message failed: -1 (3/0)
<3>[ 68.778622] dvb-usb: bulk message failed: -1 (3/0)
<3>[ 69.084703] dvb-usb: bulk message failed: -1 (3/0)
<3>[ 69.084811] dvb-usb: bulk message failed: -1 (3/0)
<3>[ 69.084917] dvb-usb: bulk message failed: -1 (1/0)
<6>[ 69.127997] dvb-usb: schedule remote query interval to 150 msecs.
<6>[ 69.128071] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
<3>[ 71.274599] dvb-usb: recv bulk message failed: -110
<3>[ 73.424614] dvb-usb: recv bulk message failed: -110
<6>[ 97.365797] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
<3>[ 593.904598] dvb-usb: recv bulk message failed: -110
<3>[ 595.904607] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 597.904603] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 599.904596] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 601.904614] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 603.904613] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 605.904606] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 607.904599] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 609.904624] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 611.904651] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 613.904642] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 615.904620] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 617.904693] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 619.904694] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 621.904678] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 623.904665] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 625.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 627.904606] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 629.904599] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 631.904599] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 633.904603] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 635.904595] dvb-usb: bulk message failed: -110 (3/0)
<3>[ 637.904603] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 639.904599] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 641.904601] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 643.904599] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 645.904639] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 647.904601] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 649.904601] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 651.904886] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 653.904693] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 655.904641] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 657.904660] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 659.904669] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 661.904651] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 663.904659] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 665.904703] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 667.904704] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 669.904685] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 671.904713] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 673.904606] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 675.904646] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 677.904689] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 679.904689] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 681.904663] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 683.904596] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 685.904620] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 687.904709] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 689.904705] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 691.904619] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 693.904746] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 695.904745] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 697.904732] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 699.904698] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 701.904607] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 703.904611] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 705.904605] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 707.904689] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 709.904695] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 711.904680] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 713.904693] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 715.904667] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 717.904658] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 719.904690] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 721.904736] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 723.904691] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 725.904627] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 727.904692] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 729.904679] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 731.904691] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 733.904704] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 735.904693] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 737.904605] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 739.904598] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 741.904616] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 743.904605] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 745.904674] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 747.904602] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 749.904591] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 751.904670] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 753.904605] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 755.904620] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 757.904634] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 759.904616] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 761.904619] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 763.904602] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 765.904599] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 767.904592] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 769.904598] dvb-usb: bulk message failed: -110 (3/0)
<3>[ 771.904991] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 773.904600] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 775.904606] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 777.904603] dvb-usb: bulk message failed: -110 (3/0)
<3>[ 779.904615] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 781.904673] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 783.904602] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 785.904609] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 787.904605] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 789.904631] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 791.904626] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 793.904605] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 795.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 797.904644] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 799.904602] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 801.904614] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 803.904599] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 805.904654] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 807.904633] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 809.904611] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 811.904609] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 813.904650] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 815.904695] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 817.904613] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 819.904643] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 821.904596] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 823.904656] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 825.904609] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 827.904603] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 829.904703] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 831.904600] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 833.904648] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 835.904598] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 837.904601] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 839.904645] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 841.904604] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 843.904620] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 845.904603] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 847.904615] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 849.904633] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 851.904601] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 853.904692] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 855.904675] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 857.904614] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 859.904610] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 861.904600] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 863.904596] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 865.905160] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 867.904612] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 869.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 871.904598] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 873.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 875.904599] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 877.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 879.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 881.904596] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 883.904596] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 885.904660] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 887.904604] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 889.904626] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 891.904615] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 893.904598] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 895.904642] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 897.904762] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 899.904628] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 901.904593] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 903.904596] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 905.904609] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 907.904604] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 909.904592] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 911.904604] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 913.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 915.904627] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 917.904599] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 919.904633] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 921.904630] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 923.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 925.904617] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 927.904615] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 929.904801] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 931.904689] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 933.904637] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 935.904672] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 937.904601] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 939.904601] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 941.904591] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 943.904605] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 945.904611] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 947.904677] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 949.904620] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 951.904617] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 953.904608] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 955.904657] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 957.904601] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 959.904592] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 961.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 963.904597] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 965.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 967.904610] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 969.904598] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 971.904593] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 973.904647] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 975.904630] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 977.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 979.904596] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 981.904615] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 983.904798] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 985.904609] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 987.904603] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 989.904607] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 991.904611] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 993.904613] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 995.904673] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 997.904596] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 999.904595] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 1001.904652] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1003.904658] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1005.904638] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1007.904658] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1009.904622] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1011.904619] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1013.904634] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1015.904628] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1017.904665] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1019.904640] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1021.904640] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1023.904622] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1025.904609] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1027.904610] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1029.904620] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1031.904633] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1033.904624] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1035.904636] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1037.904677] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1039.904627] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1041.904621] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1043.904633] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1045.904604] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1047.904631] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1049.904634] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1051.904616] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1053.904618] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1055.904677] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1057.904631] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1059.904591] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1061.904624] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1063.904604] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1065.904602] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1067.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1069.904590] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1071.904617] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1073.904614] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1075.904649] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1077.904655] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1079.904610] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1081.904652] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1083.904640] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1085.904609] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1087.904630] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1089.904608] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1091.904615] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1093.904621] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1095.904663] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1097.904597] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1099.904597] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1101.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1103.904617] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1105.904626] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1107.904625] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1109.904605] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1111.904630] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1113.904635] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1115.904629] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1117.904618] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1119.904598] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 1121.904665] dvb-usb: bulk message failed: -110 (5/0)
root@android:/ #

[taki]

dmesg

<3>[ 66.169774] WARNING: You are using an experimental version of the media stack.
<3>[ 66.169785] As the driver is backported to an older kernel, it doesn't offer
<3>[ 66.169795] enough quality for its usage in production.
<3>[ 66.169804] Use it with care.
<3>[ 66.169809] Latest git patches (needed if you report a bug to [email protected]):
<3>[ 66.169819] aeebb1b3146a70bf02d0115a2be690d856d12e8c [media] pvrusb2: For querystd, start with list of hardware-supported standards
<3>[ 66.169832] c0bb609fdc0b842799d5108aec7fae13b0fd32cd [media] pvrusb2: Get rid of obsolete code for video standard enumeration
<3>[ 66.169845] 598e978aadd39e24749e0da5a6cff568570b1d00 [media] pvrusb2: Trivial tweak to get rid of some redundant dereferences
<6>[ 68.766803] dw2102: su3000_identify_state
<6>[ 68.766810]
<6>[ 68.766840] dvb-usb: found a 'SU3000HD DVB-S USB2.0' in warm state.
<6>[ 68.766885] dw2102: su3000_power_ctrl: 1, initialized 0
<6>[ 68.766892]
<6>[ 68.766924] DWC_OTG: dwc_otg_hcd_urb_enqueue urb->transfer_buffer address not align to 4-byte 0xead0dd7e
<3>[ 68.766966] dvb-usb: bulk message failed: -1 (2/0)
<6>[ 68.767686] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
<6>[ 68.768517] DVB: registering new adapter (SU3000HD DVB-S USB2.0)
<4>[ 68.769800] 00 00 00 00 00 00
<4>[ 68.770530] 00 af 00 00 00 00
<4>[ 68.771280] 00 af 78 00 00 00
<4>[ 68.772519] 00 af 78 66 00 00
<4>[ 68.773281] 00 af 78 66 66 00
<4>[ 68.774029] 00 af 78 66 66 52
<6>[ 68.774053] dvb-usb: MAC address: 00:af:78:66:66:52
<6>[ 68.778471] DWC_OTG: dwc_otg_hcd_urb_enqueue urb->transfer_buffer address not align to 4-byte 0xead0dd65
<3>[ 68.778516] dvb-usb: bulk message failed: -1 (3/0)
<3>[ 68.778547] dw2102: command 0x0e transfer failed.
<6>[ 68.778571] DWC_OTG: dwc_otg_hcd_urb_enqueue urb->transfer_buffer address not align to 4-byte 0xead0dd65
<3>[ 68.778622] dvb-usb: bulk message failed: -1 (3/0)
<3>[ 68.778655] dw2102: command 0x0e transfer failed.
<6>[ 69.084638] DWC_OTG: dwc_otg_hcd_urb_enqueue urb->transfer_buffer address not align to 4-byte 0xead0dd65
<3>[ 69.084703] dvb-usb: bulk message failed: -1 (3/0)
<3>[ 69.084738] dw2102: command 0x0e transfer failed.
<6>[ 69.084766] DWC_OTG: dwc_otg_hcd_urb_enqueue urb->transfer_buffer address not align to 4-byte 0xead0dd65
<3>[ 69.084811] dvb-usb: bulk message failed: -1 (3/0)
<3>[ 69.084834] dw2102: command 0x0e transfer failed.
<6>[ 69.084861] DWC_OTG: dwc_otg_hcd_urb_enqueue urb->transfer_buffer address not align to 4-byte 0xead0dd65
<3>[ 69.084917] dvb-usb: bulk message failed: -1 (1/0)
<3>[ 69.084971] dw2102: command 0x51 transfer failed.
<6>[ 69.087108] DS3000 chip version: 0.192 attached.
<6>[ 69.126808] dw2102: Attached DS3000/TS2020!
<6>[ 69.126816]
<4>[ 69.126843] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
<6>[ 69.127730] input: IR-receiver inside an USB DVB receiver as /devices/platform/usb20_host/usb2/2-1/2-1.3/input/input5
<6>[ 69.127955] keychord: using input dev IR-receiver inside an USB DVB receiver for fevent
<6>[ 69.127997] dvb-usb: schedule remote query interval to 150 msecs.
<6>[ 69.128038] dw2102: su3000_power_ctrl: 0, initialized 1
<6>[ 69.128045]
<6>[ 69.128071] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
<6>[ 69.128171] usbcore: registered new interface driver dw2102
<3>[ 71.274599] dvb-usb: recv bulk message failed: -110
<3>[ 71.274627] dw2102: i2c transfer failed.
<3>[ 73.424614] dvb-usb: recv bulk message failed: -110
<3>[ 73.424671] dw2102: i2c transfer failed.
<6>[ 97.350523] dw2102: su3000_power_ctrl: 1, initialized 1
<6>[ 97.350532]
<6>[ 97.365797] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
<6>[ 97.487476] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
<6>[ 129.106159]
<6>[ 129.106162] ******************
<6>[ 129.106167] rk29_sdmmc_interrupt:INT_CD=0x1,INT-En=1,hostState=0, present Old=0 ==> New=1 . [sd_mmc]
<6>[ 131.104603]
<6>[ 131.104607] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc0]
<6>[ 131.118372] rk29_sdmmc_change_clk_div..1961.. newDiv=40, newCLK=300Khz [sd_mmc]
<6>[ 131.169127]
<6>[ 131.169131] mmc_attach_sd..1219.. ===== Begin to identify card as SD-card. [mmc0]
<6>[ 131.307971] rk29_sdmmc_change_clk_div..1961.. newDiv=0, newCLK=24000Khz [sd_mmc]
<6>[ 131.309036] mmc0: new high speed SD card at address b368
<6>[ 131.309582] mmcblk0: mmc0:b368 00000 954 MiB
<6>[ 131.311944]
<6>[ 131.311947] msdos_partition..461... ==== Begin to parse sdcard-partition. [mmc0]
<6>[ 131.311986] msdos_partition..530... ==== The sdcard has MBR. [mmc0]
<6>[ 131.312018] msdos_partition..543... ==== partition-1, size=975872KB [mmc0]
<6>[ 131.312049] msdos_partition..571... ==== main partition-1....[mmc0]
<6>[ 131.312077] mmcblk0: p1
<6>[ 131.313400] .428.. MMC0 receive the message sd-Pending from VOLD.[sd_mmc]
<6>[ 131.314870] .428.. MMC0 receive the message sd-Idle-Unmounted from VOLD.[sd_mmc]
<6>[ 131.315244] mmc_rescan_try_freq..1718.. ===== Initialize SD-card successfully. [mmc0]
<6>[ 131.319535] .428.. MMC0 receive the message sd-Checking from VOLD.[sd_mmc]
<6>[ 131.330173] .428.. MMC0 receive the message sd-Mounted from VOLD.[sd_mmc]
<6>[ 143.024248] qtaguid: ctrl_counterset(s 1 10020): insufficient priv from pid=432 tgid=361 uid=1000
<6>[ 147.048881] qtaguid: ctrl_counterset(s 0 10033): insufficient priv from pid=432 tgid=361 uid=1000
<3>[ 147.083950] init: untracked pid 1330 exited
<6>[ 148.410621] EXT4-fs (mtdblock8): re-mounted. Opts: (null)
<3>[ 148.904160] init: untracked pid 1363 exited
<6>[ 156.247657] qtaguid: ctrl_counterset(s 1 10028): insufficient priv from pid=432 tgid=361 uid=1000
<6>[ 174.480400] qtaguid: ctrl_counterset(s 0 10020): insufficient priv from pid=432 tgid=361 uid=1000
<6>[ 175.251755] qtaguid: ctrl_counterset(s 1 10020): insufficient priv from pid=432 tgid=361 uid=1000
<6>[ 177.516570] binder: 361:435 transaction failed 29189, size 100-4
<4>[ 222.255743] DVB: adapter 0 frontend 0 frequency 3577000 out of range (950000..2150000)
<6>[ 232.489212] qtaguid: ctrl_counterset(s 1 10054): insufficient priv from pid=432 tgid=361 uid=1000
<6>[ 232.489551] qtaguid: ctrl_counterset(s 0 10020): insufficient priv from pid=432 tgid=361 uid=1000
<6>[ 249.370073] qtaguid: ctrl_counterset(s 0 10028): insufficient priv from pid=432 tgid=361 uid=1000
<3>[ 289.500542] init: sys_prop: permission denied uid:10054 name:media.cfg.audio.soundeffect
<3>[ 568.878252] init: sys_prop: permission denied uid:10054 name:media.cfg.audio.soundeffect
<3>[ 593.904598] dvb-usb: recv bulk message failed: -110
<3>[ 593.904634] dw2102: i2c transfer failed.
<3>[ 595.904607] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 595.904645] dw2102: i2c transfer failed.
<3>[ 597.904603] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 597.904635] dw2102: i2c transfer failed.
<3>[ 599.904596] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 599.904628] dw2102: i2c transfer failed.
<3>[ 601.904614] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 601.904649] dw2102: i2c transfer failed.
<3>[ 603.904613] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 603.904644] dw2102: i2c transfer failed.
<3>[ 605.904606] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 605.904650] dw2102: i2c transfer failed.
<3>[ 607.904599] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 607.904647] dw2102: i2c transfer failed.
<3>[ 609.904624] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 609.904671] dw2102: i2c transfer failed.
<3>[ 611.904651] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 611.904715] dw2102: i2c transfer failed.
<3>[ 613.904642] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 613.904701] dw2102: i2c transfer failed.
<3>[ 615.904620] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 615.904664] dw2102: i2c transfer failed.
<3>[ 616.053795] init: sys_prop: permission denied uid:10054 name:media.cfg.audio.soundeffect
<3>[ 617.904693] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 617.904786] dw2102: i2c transfer failed.
<3>[ 619.904694] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 619.904762] dw2102: i2c transfer failed.
<3>[ 621.904678] dvb-usb: bulk message failed: -110 (4/0)
<3>[ 863.904625] dw2102: i2c transfer failed.
<3>[ 865.905160] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 865.905189] dw2102: i2c transfer failed.
<3>[ 867.904612] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 867.904649] dw2102: i2c transfer failed.
<3>[ 869.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 869.904624] dw2102: i2c transfer failed.
<3>[ 871.904598] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 871.904627] dw2102: i2c transfer failed.
<6>[ 872.351543] qtaguid: ctrl_counterset(s 1 10033): insufficient priv from pid=432 tgid=361 uid=1000
<6>[ 872.581014] qtaguid: ctrl_counterset(s 0 10054): insufficient priv from pid=432 tgid=361 uid=1000
<3>[ 873.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 873.904624] dw2102: i2c transfer failed.
<3>[ 875.904599] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 875.904629] dw2102: i2c transfer failed.
<3>[ 877.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 877.904624] dw2102: i2c transfer failed.
<3>[ 879.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 879.904624] dw2102: i2c transfer failed.
<3>[ 881.904596] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 881.904625] dw2102: i2c transfer failed.
<3>[ 883.904596] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 883.904625] dw2102: i2c transfer failed.
<3>[ 885.904660] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 885.904708] dw2102: i2c transfer failed.
<3>[ 887.904604] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 887.904636] dw2102: i2c transfer failed.
<6>[ 889.473699] qtaguid: ctrl_counterset(s 1 10017): insufficient priv from pid=432 tgid=361 uid=1000
<3>[ 889.904626] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 889.904655] dw2102: i2c transfer failed.
<6>[ 891.699329] qtaguid: ctrl_counterset(s 0 10033): insufficient priv from pid=432 tgid=361 uid=1000
<3>[ 891.904615] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 891.904644] dw2102: i2c transfer failed.
<3>[ 893.904598] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 893.904627] dw2102: i2c transfer failed.
<3>[ 895.904642] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 895.904707] dw2102: i2c transfer failed.
<3>[ 897.904762] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 897.904901] dw2102: i2c transfer failed.
<3>[ 899.904628] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 899.904720] dw2102: i2c transfer failed.
<3>[ 901.904593] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 901.904622] dw2102: i2c transfer failed.
<3>[ 903.904596] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 903.904624] dw2102: i2c transfer failed.
<3>[ 905.904609] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 905.904646] dw2102: i2c transfer failed.
<3>[ 907.904604] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 907.904634] dw2102: i2c transfer failed.
<3>[ 909.904592] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 909.904621] dw2102: i2c transfer failed.
<3>[ 911.904604] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 911.904639] dw2102: i2c transfer failed.
<3>[ 913.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 913.904624] dw2102: i2c transfer failed.
<3>[ 915.904627] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 915.904657] dw2102: i2c transfer failed.
<3>[ 917.904599] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 917.904628] dw2102: i2c transfer failed.
<3>[ 919.904633] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 919.904665] dw2102: i2c transfer failed.
<3>[ 921.904630] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 921.904662] dw2102: i2c transfer failed.
<6>[ 922.359308] qtaguid: ctrl_counterset(s 1 10033): insufficient priv from pid=432 tgid=361 uid=1000
<6>[ 922.501200] qtaguid: ctrl_counterset(s 0 10017): insufficient priv from pid=432 tgid=361 uid=1000
<3>[ 923.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 923.904624] dw2102: i2c transfer failed.
<6>[ 924.944241] qtaguid: ctrl_counterset(s 1 10017): insufficient priv from pid=432 tgid=361 uid=1000
<6>[ 925.471038] qtaguid: ctrl_counterset(s 0 10033): insufficient priv from pid=432 tgid=361 uid=1000
<3>[ 925.904617] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 925.904647] dw2102: i2c transfer failed.
<3>[ 927.904615] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 927.904647] dw2102: i2c transfer failed.
<3>[ 929.904801] dvb-usb: bulk message failed: -110 (1/0)
<3>[ 929.904896] dw2102: i2c transfer failed.
<3>[ 931.904689] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 931.904775] dw2102: i2c transfer failed.
<3>[ 933.904637] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 933.904699] dw2102: i2c transfer failed.
<3>[ 935.904672] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 935.904709] dw2102: i2c transfer failed.
<3>[ 937.904601] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 937.904631] dw2102: i2c transfer failed.
<3>[ 939.904601] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 939.904630] dw2102: i2c transfer failed.
<3>[ 941.904591] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 941.904620] dw2102: i2c transfer failed.
<3>[ 943.904605] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 943.904635] dw2102: i2c transfer failed.
<3>[ 945.904611] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 945.904640] dw2102: i2c transfer failed.
<3>[ 947.904677] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 947.904743] dw2102: i2c transfer failed.
<3>[ 949.904620] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 949.904651] dw2102: i2c transfer failed.
<6>[ 950.934497] qtaguid: ctrl_counterset(s 1 10033): insufficient priv from pid=432 tgid=361 uid=1000
<6>[ 951.068073] qtaguid: ctrl_counterset(s 0 10017): insufficient priv from pid=432 tgid=361 uid=1000
<3>[ 951.904617] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 951.904648] dw2102: i2c transfer failed.
<3>[ 953.904608] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 953.904636] dw2102: i2c transfer failed.
<3>[ 955.904657] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 955.904698] dw2102: i2c transfer failed.
<6>[ 956.531553] qtaguid: ctrl_counterset(s 0 10033): insufficient priv from pid=432 tgid=361 uid=1000
<3>[ 957.904601] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 957.904636] dw2102: i2c transfer failed.
<6>[ 959.275171] qtaguid: ctrl_counterset(s 1 10045): insufficient priv from pid=432 tgid=361 uid=1000
<3>[ 959.904592] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 959.904620] dw2102: i2c transfer failed.
<3>[ 961.904595] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 961.904624] dw2102: i2c transfer failed.
<3>[ 961.934908] init: untracked pid 2009 exited
<3>[ 963.904597] dvb-usb: bulk message failed: -110 (5/0)
<3>[ 963.904625] dw2102: i2c transfer failed.
root@android:/ # 0

[taki]

I have new experineces
first: android tvheadent compatiple our kernel and works %100. firmware %1000 compatiple and support our kernel minix etc.
second:
I only have some problem for my device driver. (signal weakness, map channels etc) my driver not full compatible ours kernel 3.0.36+
third: I found that What couses HD channels didnt watch able (tvheadent find and stream all device with android firmware)
(h264 mpeg4 1080p) Transponder Stream *.ts , not playable our device. anything codeh support. beacuse my latop playing smootly with tvheadent local connections. ( but not enough connections of 100mbs lan for 1080p hd) (look photo1)
it is streaming appear sd channel like HD channels.thats perfect but only problem is (photo2 (find internet photo) some channels under flowing text. flowing text not good appear like windows dvbplayer sd channels. our mpeg2 codech video render not rendering flowing text.

[Ateakian]

I have new experineces
first: android tvheadent compatiple our kernel and works %100. firmware %1000 compatiple and support our kernel minix etc.
second:
I only have some problem for my device driver. (signal weakness, map channels etc) my driver not full compatible ours kernel 3.0.36+
third: I found that What couses HD channels didnt watch able (tvheadent find and stream all device with android firmware)
(h264 mpeg4 1080p) Transponder Stream *.ts , not playable our device. anything codeh support. beacuse my latop playing smootly with tvheadent local connections. ( but not enough connections of 100mbs lan for 1080p hd) (look photo1)
it is streaming appear sd channel like HD channels.thats perfect but only problem is (photo2 (find internet photo) some channels under flowing text. flowing text not good appear like windows dvbplayer sd channels. our mpeg2 codech video render not rendering flowing text.

I am having the same issues here with cx 919. SD channels perfect but HD playing but with issues. Will watch thread for fix

[taki]

Tvheadend 4.0

show up new version of tvheaent 4.0 may be somebody port to android.
change

http://forum.xbmc.org/showthread.php?tid=179738

For the new DVB code, things have been re-organised with the hope of trying to make it easier to manage the DVB configuration. In particular where users have multiple tuners. The DVB config is now split into 4 sections:

• Inputs - DVB tuners
• Networks - The collection of muxes that a tuner can receive (or in the case of DVB-S, can receive from a given orbital position)
• Muxes - Standard DVB definition, a collection of services sent by the provider
• Services - Standard DVB definition, a given service/channel within a mux

To configure a single DVB network do the following:
1. Go to Configuration -> DVB Inputs -> Networks
2. Click "Add"
3. Select the type (DVB-S/T/C, ATSC)
4. Fill in a name, just for your own sanity and debug output. You can usually leave the defaults.
5. If you want to add a pre-configured network (set of muxes) then select from drop down.
6. If not, the go to Configuration -> DVB Inputs -> Muxes
7. Click "Add"
8. Select the network you're adding to.
9. Fill in the Mux settings (if you don't know these, you probably should use a pre-configured set)
This will be roughly the point at which the migration script will leave you, for those that have gone down that route.
10. Go to Configuration -> DVB Inputs -> Tuners
11. Select the relevant frontend device and tick enabled.
12. For non-DVB-S you should select network you want to link to this tuner.
13. If this is DVB-S then select the type of DiseqC arrangement (if you don't know what that should be, just select LNB only, default).
14. Hit Save
15. For DVB-S you need to select the appropriate sub-entry for your DiseqC config (either switchport or LNB)
16. Select appropriate network
17. Hit Save
If you have multiple tuners receiving the same network, then repeat the steps for each.
For those with DVB-S rotors or uncommitted switches I'm afraid the config is still a bit cumbersome. I will try and document it, but for now best to pop along to #hts.
If you go to the "Network" configuration tab, you should be able to watch the progress of the initial scan.
Well I'm sure there will still be plenty of teething problems, and I wouldn't expect a 4.0 release for sometime yet. But hopefully this will be enough to get people going.
Adam

[taki]

transponder stream *.ts

I recorded hd channels with my vu duo receiver 4,1gb MPEG4 H 264 ts file. later try to playing my minix7. I have similar result for HD transponder streams ts file. certainly does not play ts file (stutter, mosaic etc.). I send ph

[ferrariale]

can someone help me? I performed all the steps to the letter, however, I get this error:

127|root@android:/ # cd system
root@android:/system # cd etc
root@android:/system/etc # cd init.d
root@android:/system/etc/init.d # sh 02dvbt
insmod: init_module '/system/lib/modules/dvb-core.ko' failed (File exists)
insmod: init_module '/system/lib/modules/dvb-pll.ko' failed (File exists)
insmod: init_module '/system/lib/modules/dvb_usb_v2.ko' failed (File exists)
insmod: init_module '/system/lib/modules/altera-stapl.ko' failed (File exists)
insmod: init_module '/system/lib/modules/af9013.ko' failed (File exists)
insmod: init_module '/system/lib/modules/mc44s803.ko' failed (File exists)
insmod: init_module '/system/lib/modules/mt2060.ko' failed (File exists)
insmod: init_module '/system/lib/modules/mxl5005s.ko' failed (File exists)
insmod: init_module '/system/lib/modules/mxl5007t.ko' failed (File exists)
insmod: init_module '/system/lib/modules/qt1010.ko' failed (File exists)
insmod: init_module '/system/lib/modules/tda18218.ko' failed (File exists)
insmod: init_module '/system/lib/modules/tda18271.ko' failed (File exists)
insmod: init_module '/system/lib/modules/it913x-fe.ko' failed (File exists)
insmod: init_module '/system/lib/modules/dvb-usb-rtl2832u.ko' failed (No such file or directory)
insmod: init_module '/system/lib/modules/dvb-usb-af9015.ko' failed (File exists)
mkdir failed for /dev/dvb, File exists
mkdir failed for /sdcard/.hts, File exists
mkdir failed for /dev/dvb/adapter0, File exists
link failed File exists
link failed File exists
link failed File exists
link failed File exists
mkdir failed for /dev/dvb/adapter1, File exists
link failed File exists
link failed File exists
link failed File exists
link failed File exists
Dec 17 18:24:48 [ INFO]:START: initialising
Dec 17 18:24:48 [ INFO]:charset: 71 entries loaded
Dec 17 18:24:48 [ ERROR]:tcp: bind: *: Address already in use
Dec 17 18:24:48 [ INFO]:CSA: Using 32bit parallel descrambling
Dec 17 18:24:48 [ INFO]:epggrab: module eit created
Dec 17 18:24:48 [ INFO]:epggrab: module uk_freesat created
Dec 17 18:24:48 [ INFO]:epggrab: module uk_freeview created
Dec 17 18:24:48 [ INFO]:epggrab: module viasat_baltic created
Dec 17 18:24:48 [ INFO]:epggrab: module opentv-ausat created
Dec 17 18:24:48 [ INFO]:epggrab: module opentv-skyuk created
Dec 17 18:24:48 [ INFO]:epggrab: module opentv-skyit created
Dec 17 18:24:48 [ INFO]:epggrab: module pyepg created
Dec 17 18:24:48 [ INFO]:epggrab: module xmltv created
Dec 17 18:24:48 [ INFO]:dvr: Creating new configuration ''
Dec 17 18:24:48 [WARNING]:dvr: Output directory for video recording is not yet configured for DVR configuration "". Defaulting to to "/". This can be changed from the web user interface.
Dec 17 18:24:48 [ ERROR]:tcp: bind: *: Address already in use
Dec 17 18:24:48 [ NOTICE]:START: HTS Tvheadend version started, running as PID:2259 UID:0 GID:0, settings located in '/sdcard/.hts'

and this is a piece of dmesg:

<6>[ 3.043295] usb 2-1.4: new high speed USB device number 5 using usb20_host
<3>[ 3.142667] android_usb: already disabled
<3>[ 3.142894] android_usb: already disabled
<6>[ 3.143044] mtp_bind_config
<6>[ 3.154865] usb 2-1.4: New USB device found, idVendor=1f4d, idProduct=c803
<6>[ 3.154915] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 3.154957] usb 2-1.4: Product: RTL2838UHIDIR
<6>[ 3.154979] usb 2-1.4: Manufacturer: Realtek
<6>[ 3.155003] usb 2-1.4: SerialNumber: 00000001

<4>[ 57.331392] dvb_usb_rtl28xxu: Unknown symbol rtl2830_get_tuner_i2c_adapter (err 0)
<4>[ 57.331516] dvb_usb_rtl28xxu: Unknown symbol dvb_usb_device_init (err 0)
<4>[ 57.331590] dvb_usb_rtl28xxu: Unknown symbol dvb_usb_device_exit (err 0)
<6>[ 57.393841] usbcore: registered new interface driver dvb_usb_af9015

my usb stick is a Trekstor with RTL2832 chip
thanks

[taki]

who combiled driver for dvb-usb-rtl2832u.ko and your firmware support init.d.. I think dvbt init don work with startup

[ferrariale]

and what should I do? sorry but understand little of Android and Linux

[sam321]

and what should I do? sorry but understand little of Android and Linux

you are missing the driver for your tuner. To fix it download the pre-compiled driver pack and find dvb-usb-rtl2832u.ko and copy it to system/lib/modules on your android box

[ferrariale]

I downloaded the:

video4linux and liplianin-s2-liplianin-v37 in the first post

I found in dvb-usb-rtl28xxu.ko and I renamed in dvb-usb-rtl2832u.ko I put it in module and I changed the file init.d with my dvb-usb-rtl2832u.k

[sam321]

I downloaded the:video4linux and liplianin-s2-liplianin-v37 in the first postI found in dvb-usb-rtl28xxu.ko and I renamed in dvb-usb-rtl2832u.ko I put it in module and I changed the file init.d with my dvb-usb-rtl2832u.k

that is the problem you should not rename the drivers. I will make you a driver pack