OFFICIAL Q10 PRO FIRMWARE ANDROID 7. FUTEKO. HMD-2.1.0 2018-09-20
Internal build number: HMD-2.1.0 2018-09-20.022650
** THIS FIRMWARE IS FOR Q10 PRO RUNNING ANDROID 7 FIRMWARE 2.0.4 OR LATER.
** THIS FIRMWARE IS FOR EUROPEAN HIMEDIA Q10 PRO ONLY!
** DO NOT INSTALL ON CHINESE HARDWARE VERSION Q10 PRO OR OR PREVIOUS GENERATION Q10 4K3D.
** YOU WILL LOSE ALL USER INSTALLED APPS AND SETTINGS! PLEASE BACK UP BEFORE UPDATING (Kodi backup: http://kodi.wiki/view/backup).
Changelog:
1. Fix the issue 'the Google Search App may automatically run if switch TV resolution'
2. Fix the issue 'the MediaCenter sometimes has no response'
3. Fix the issue 'power on the box--click Media Center and enter a folder--playback a video in the folder--press Return button on the remote control won’t go back to the folder'
4. Modify some words of the MediaCenter
5. Fix the issue 'when Factory Default the box, the LED display status still not set as factory default'
6. Fix the issue 'remote control unable to turn off the box sometimes'
7. Fix the issue 'HDMI without output sometimes'
Download & Instructions
THIS FIRMWARE CAN ONLY BE INSTALLED ON A EUROPEAN Q10 PRO RUNNING ANDROID 7 FIRMWARE 2.0.4 OR LATER! Information on how to update from earlier firmware to Q10 Pro version 2.0.4 is here.
Your current firmware version can be found at Settings - About - Device Info - Build number.
Download: https://www.mediafire.com/file/0zqqy...22650.zip/file
1. Extract update.zip (using an unzip program like 7zip, winzip etc) from the downloaded zip archive to the root of a FAT32 formatted USB pen drive. (the USB pen drive should contain a single file called 'update.zip'). Note, there is no need to rename anything!
2. Insert the USB pen drive into any USB port of Q10 Pro.
3. With Q10 Pro turned off, use a paper clip or pen to press and hold the the pinhole UPGRADE button on the back of Q10 Pro (next to the power port).
4. While keeping the UPGRADE button pressed, turn on the Q10 Pro.
5. Q10 Pro will show the Android 7 coloured circle logo.
6. When you see the circle logo you can release the restore button.
7. A progress bar will indicate update progress. Do not turn box off or use the box/remote during update!
8. When update is complete the box will automatically reboot.
9. First boot will take 3-5 minutes. The box will reboot into new firmware. Allow boot to complete.
Source: Futeko
Internal build number: HMD-2.1.0 2018-09-20.022650
** THIS FIRMWARE IS FOR Q10 PRO RUNNING ANDROID 7 FIRMWARE 2.0.4 OR LATER.
** THIS FIRMWARE IS FOR EUROPEAN HIMEDIA Q10 PRO ONLY!
** DO NOT INSTALL ON CHINESE HARDWARE VERSION Q10 PRO OR OR PREVIOUS GENERATION Q10 4K3D.
** YOU WILL LOSE ALL USER INSTALLED APPS AND SETTINGS! PLEASE BACK UP BEFORE UPDATING (Kodi backup: http://kodi.wiki/view/backup).
Changelog:
1. Fix the issue 'the Google Search App may automatically run if switch TV resolution'
2. Fix the issue 'the MediaCenter sometimes has no response'
3. Fix the issue 'power on the box--click Media Center and enter a folder--playback a video in the folder--press Return button on the remote control won’t go back to the folder'
4. Modify some words of the MediaCenter
5. Fix the issue 'when Factory Default the box, the LED display status still not set as factory default'
6. Fix the issue 'remote control unable to turn off the box sometimes'
7. Fix the issue 'HDMI without output sometimes'
Download & Instructions
THIS FIRMWARE CAN ONLY BE INSTALLED ON A EUROPEAN Q10 PRO RUNNING ANDROID 7 FIRMWARE 2.0.4 OR LATER! Information on how to update from earlier firmware to Q10 Pro version 2.0.4 is here.
Your current firmware version can be found at Settings - About - Device Info - Build number.
Download: https://www.mediafire.com/file/0zqqy...22650.zip/file
1. Extract update.zip (using an unzip program like 7zip, winzip etc) from the downloaded zip archive to the root of a FAT32 formatted USB pen drive. (the USB pen drive should contain a single file called 'update.zip'). Note, there is no need to rename anything!
2. Insert the USB pen drive into any USB port of Q10 Pro.
3. With Q10 Pro turned off, use a paper clip or pen to press and hold the the pinhole UPGRADE button on the back of Q10 Pro (next to the power port).
4. While keeping the UPGRADE button pressed, turn on the Q10 Pro.
5. Q10 Pro will show the Android 7 coloured circle logo.
6. When you see the circle logo you can release the restore button.
7. A progress bar will indicate update progress. Do not turn box off or use the box/remote during update!
8. When update is complete the box will automatically reboot.
9. First boot will take 3-5 minutes. The box will reboot into new firmware. Allow boot to complete.
Source: Futeko
