Kit Kat 4.4.2 RK3066 (Fully Working)

[Shomari]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

Thanks reddragon72. Please share the files and instructions if possible

The instructions are here, from Bob some time ago. http://www.freaktab.com/showthread.p...ull=1#post4054

If reddragon72 shares his parameter edits I can link it in the first post for others to benefit. I know a few users have asked to mod the partitions.

Here is the stock parameter file for the ROM: http://ge.tt/5OeiV9o1/v/0?c

Use the instructions to size partitions to your need.

[reddragon72]

The instructions are here, from Bob some time ago. http://www.freaktab.com/showthread.p...ull=1#post4054

If reddragon72 shares his parameter edits I can link it in the first post for others to benefit. I know a few users have asked to mod the partitions.

Here is the stock parameter file for the ROM: http://ge.tt/5OeiV9o1/v/0?c

Use the instructions to size partitions to your need.

6GB setup. It only leaves 300mb for the NAND(SDCARD)

FIRMWARE_VER:4.4.2
MACHINE_MODEL:rk31_8089
MACHINE_ID:007
MANUFACTURER:RK30SDK
MAGIC: 0x5041524B
ATAG: 0x60000800
MACHINE: 3066
CHECK_MASK: 0x80
KERNEL_IMG: 0x60408000
#RECOVER_KEY: 1,1,0,20,0
CMDLINE:console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x 00008000@0x00004000(kernel),0x00008000@0x0000C000( boot),0x000C000@0x00014000(recovery),0x00100000@0x 00020000(backup),0x00040000@0x00120000(cache),0x00 C00000@0x00160000(userdata),0x00002000@0x00D60000( metadata),0x00002000@0x00D62000(kpanic),0x00100000 @0x00D64000(system),-@0x00E64000(user)

4Gb - but I never loaded this just calculated it so no idea what is left over for NAND

FIRMWARE_VER:4.4.2
MACHINE_MODEL:rk31_8089
MACHINE_ID:007
MANUFACTURER:RK30SDK
MAGIC: 0x5041524B
ATAG: 0x60000800
MACHINE: 3066
CHECK_MASK: 0x80
KERNEL_IMG: 0x60408000
#RECOVER_KEY: 1,1,0,20,0
CMDLINE:console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x 00008000@0x00004000(kernel),0x00008000@0x0000C000( boot),0x000C000@0x00014000(recovery),0x00100000@0x 00020000(backup),0x00040000@0x00120000(cache),0x00 800000@0x00160000(userdata),0x00002000@0x00960000( metadata),0x00002000@0x00962000(kpanic),0x00100000 @0x00964000(system),-@0x00A64000(user)


the program to open up the main IMG file was http://www.rockchipfirmware.com/site...G_Mod_Tool.zip

Still working on killing off that 300mb NAND so I can get that 750Gb USB drive in place of it. I am wondering if just adding an actual SDCARD will work. I don't have an extra laying around at the moment so I cannot try it out to see if apps with "extra" downloads can be put on that.

[enviro8]

Yes Please

W
UPDATE: I found a tool that extracted the img. working on it to see if I can figure out the parameter file. comparing looks crazy but I think I can figure it out.... maybe Bob can stop by and give me a few pointers....

UPDATE!!!!!!! I figured it out and now have 5.91G of internal app storage! YES!!!!!! now I am going to get my 720 gig USB harddrive setup as the SDCARD and be all set!!!

If anyone wants I can setup the files and upload for 4 and 6 gigs.

Yes please and can you advise what tool you used

[KVlady]

Tool for edit param file

Tool for edit param file:
Name software - RK ParamEd
OS -Windows
GUI Language - Eng and Rus
Link http://4pda.ru/forum/dl/post/3899187...ramEd_1.01.rar

[reddragon72]

Yes please and can you advise what tool you used

See my post 212 the link is in there.

[Shomari]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

Tool for edit param file:
Name software - RK ParamEd
OS -Windows
GUI Language - Eng and Rus
Link http://4pda.ru/forum/dl/post/3899187...ramEd_1.01.rar

Thanks! This can help a lot of users. I see it's an updated version, too.

[gatorojo]

I've unpacked the image using the tool.. changed the parameter file... repack...

Load the firmware... it does everything but wont boot up...

I've tried the original kk rom and works again...

not a clue, maybe different device...

[reddragon72]

I've unpacked the image using the tool.. changed the parameter file... repack...

Load the firmware... it does everything but wont boot up...

I've tried the original kk rom and works again...

not a clue, maybe different device...

I did not repack mine. I used Finless flash tool that loads each file individually. I only use the RKtool to "switch" it into download when it did boot or the hard reset when I couldn't get it to boot.

Did you use the 4 or 6bg par file? I never tried the 4Gb but my calculations look correct, but I'll go through them again to to be sure.

Oh and with Finless's tool remember to use the boot file from the extracted 4.4.2 as the one from any other version will not work. needs to be v2.12

[gatorojo]

I did not repack mine. I used Finless flash tool that loads each file individually. I only use the RKtool to "switch" it into download when it did boot or the hard reset when I couldn't get it to boot.

Did you use the 4 or 6bg par file? I never tried the 4Gb but my calculations look correct, but I'll go through them again to to be sure.

Oh and with Finless's tool remember to use the boot file from the extracted 4.4.2 as the one from any other version will not work. needs to be v2.12

I see i'll try to do the same with the unpacked files. Thanks!

[gatorojo]

Still no luck, can you please paste the parameters inside a code tag, i think on the copy from forum post its the problem.

Thanks again!

[Shomari]

Still no luck, can you please paste the parameters inside a code tag, i think on the copy from forum post its the problem.

Thanks again!

Use this file, it uses the changes from above http://ge.tt/9fbStJo1/v/1?c

[gatorojo]

4gb and 6gb parameters files

That didn't worked out either Shomari, so what i've tried was change the original file with dragon's digits and that finally works!

I've tested both 4 and 6 gb files

You can download them from here: Parameters

I hope those can help

Already rooted again and upload FusedLocation.apk to my device

Thanks again guys for yout help!

[Pampam]

Do dis also works on the minix x5

[reddragon72]

That didn't worked out either Shomari, so what i've tried was change the original file with dragon's digits and that finally works!

I've tested both 4 and 6 gb files

You can download them from here: Parameters

I hope those can help

Already rooted again and upload FusedLocation.apk to my device

Thanks again guys for yout help!

Glad they got that straight for you. Yea you have to copy and paste into the current file. Creating a new one in Windows wont work.

I am still working on the swap over from the internal NAND to the USB drive. No luck as it seems they no longer use the vold.fstab files.... I am digging deeper into the system files and still nothing. All the ini files are useless so I am stumped but not out.

Once I find out how to swap the USB into the NAND slot I'll post up. A USB 2.0 harddrive is faster that an SDCard and every bit as fast as the internal RAM. My 4.1.1 setup was awesome with the 6Gb app storage and the USB harddrive.

[mite_jan]

what about those with Realtek RTL8188CUS wifi chipsets ? (RTL8192CU uses the same driver too)
any way to make wifi work?