MX2 “Authorization Problem”

[Tazer98]

I flashed my MX2 to 1.7a and it started fine. The first thing I wanted to do was get myWi-Fi setup and working. Tried several times what seemed to be simple on the stock MX2.

When trying to connect it always comes up with “AuthorizationProblem”. I’ve checked and re-entered the password, reset/rebooted, clock & time, changed router security method from WPA-Personal to WPA2, rebooted router, etc.

Did I skip a step in the 1.7a instructions? (All wentsmoothly to completion.)

I can’t come up with any more options. Can you?

My configuration is: Windows 7, WRT54GS router with WPA2, IMITO MX2 with finless 1.7a.

I’ve searched the forums here and Googled but didn’t come upwith anything else.

Thanks in advance,

Tazer98

[Tazer98]

MX2 “Authorization Problem” - SOLVED!

It’s finally solved!!
I did it by trial and error method. In addition to what I tried in my first post, I set the wireless channel back to 6 (was working prior to flashing), changed WPA Algorithms to AES instead of ‘TKIP&AES’, changed the WPA Shared Key,rebooted both the router and Imito. Now it works as before, though a bit faster and cleaner with 1.7a!

Tazer98