MK808B unknown version

[weller]

with linux deplox I managed to install Linux on Android but this is not it. I need only linux installed in a flash. driver is installed,device is rooted, windows it sees the device, but Batch Tool does not recognize no green cubes whether there is really nothing for this clone, which would have flashed a custom rom and linux with him?

I need something like this http://www.freaktab.com/showthread.p...untu-for-MK808

[weller]

@Neomode I found the shift right click. I do not know if it's good RKBatchTool invisibly device and after reboot

[weller]

I finally installed the ADB driver. I had a problem because the device was not checked by connect to a PC. now this part ok but do not know how to open a command window in the directory where is ADB? If the directory application you sent me I click on the adb cmd just appear and disappear that part I do not understand the best.

[neomode]

Ah yes sorry! Http://www.freak-tab.de/neomode/adb_usb_driver.zip

Gesendet von meinem HUAWEI P7-L10

[weller]

@Neomode thanks but the link does not work.

[neomode]

adb.zip

http://www.freak-tab.de/adb_usb_driver.zip

Here are the ADB USB Driver and the ADB Programm you will need.
Now how to use it.

1.: Connect the USB Cable to the OTG Port.
2.: Power Up your Stick
3.: Go to Settings -> Developer Options -> Activate USB Debugging
4.: Now your PC should detect a new Device
5.: Install the ADB USB Driver by Hand
6.: After this extract the adb to a directory and open an Command Prompt there
7.: Now type:

su
adb reboot bootloader


Now you can Flash your Device.

Regards
Neomode

[weller]

I tried both the micro USB port.
I tried it and more applications for reboot but says (this app not function without root permision)
@neomode many thanks for your help I hope you send me these instructions for ADB that I will succeed.

[neomode]

Ok got you. I will provide you with a link for the ADB Driver and the ADB Program later then you can get your Device to Bootloader.
Also you have normally 2 Micro USB Ports did you try both?

Gesendet von meinem HUAWEI P7-L10

[weller]

I tried but no success

[neomode]

Try to install a reboot app on your Device to Boot in Boot Loader Mode.

Gesendet von meinem HUAWEI P7-L10

[weller]

The Stick is Still running ?
If yes ADB to the Device and then Type adb reboot bootloader.

Neomode

I do not understand the best? "ADB to the Device" can you give me a little more detail please?

[neomode]

The Stick is Still running ?
If yes ADB to the Device and then Type adb reboot bootloader.

Neomode

[weller]

I did exactly as you wrote but the software does not see the device
with another link I do not know how to download?

[neomode]

First you must bring your Device in Flash Mode. Means you press the rest Button Hold it and Plug in the Micro USB Cable from your Pc to the OTG Port.
Than you can Flash it.
The Second Firmware is also for RK30 with MTK Chipset in that case the First one did not Work.

Neomode

Gesendet von meinem HUAWEI P7-L10

[weller]

thank @neomode! driver is maybe good but RKBatchTool not see the device. What is the second link I do not know Chinese?
Do you have any suggestions?