If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Ok, i tried the 1080.imgs and 2gb parameters.
Doesn't work for me. It crashes to white screen when trying to sign up for play store.
(a)Reflashed using 720.ims and 2gb parameters.
Signup playstore ok. Install antutu and press open. Crashed to white screen again.
Any idea why?
Next try will be the default 720.img and 1gb parameters which worked(my first flash was using this).
Date and time were setup properly with the above crashes.
Now trying to reboot using (a) but stuck in boot screen(the one with your signature at bottom left o screen and metallic android)
Hmmm......?
Flashing were completed with no errors of any kind.
Third time reflashing with default settings(720.imgs and 1gb parameters)
Speedtest , antutu cpu master open ok. youtube hd plays quite smoothly.
BUT Antutu Benchmark crashes everytime either to white or green screen.
When i install it 1st time(see above post) it was ok and got a score of 8109. Now crashed. Why Why Why??????
Now also tried other benchmarking apps(Quadrant Std edition) NO GO too. Crashed like antutu.
Today I flashed Measy U2A with this ROM and this is the best ROM i`ve ever tried.
Obviously wifi doesn`t work but i got USB-rj45 and finally LAN works like a charm. With 1.7 Finless`es ROMs it didn`t, everytime I tried to download something from Google Store or watch Youtube, Measy crashed.
Moreover, i did some tests with Antutu. Best score was almost 9200, so i`m really happy.
Some apps like wetter.com are still marked as not compatible in Google Play Store.
The following changes will enable some more applications.
Open a terminal window (requires root access)
Mount /system as rw
# su -
# mount -o rw,remount /system
Modify /system/build.prop or use build.prop from the zip file:
ro.product.board=grouper
Copy XML files from the zip-attachment to /system/etc/permissions/ and build.prop to /system/
Correct the file permissions for all copied files
# chmod 644 /system/etc/permissions/*.xml
# chown 0:0 /system/etc/permissions/*.xml
# chmod 644 /system/build.prop
# chown 0:0 /system/build.prop
Go to Settings -> Apps -> All -> Google Play Store -> Force Stop and Clear Data
Reboot
In some cases you might to need to clear data for Google Services Framework, too.
mop, thanks.... I just checked and your right. I usually always add these XML files but missed it this time darn it
If I do an update, I will add them.
quertz, 4.2.2 changed the TV HDMI output format and some TVs wont work. If you look through any of the 4.2.2 ROM threads this is a common issue. I have not figured out why yet but it is a fact that some TVs cant handle the new output format.
FYI this same format is what is screwing up Netflix from working....
Bob
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
I had 1.5, tried flashing 2.1, followed instructions exactly, no display now. PC not detecting device now either. Any way to re-flash this?
From README FIRST.TXT
Flash mode using the reset button:
If you do not ever see the flash tool say "Found RKAndroid MASS Storage USB"
Or reboot to flash mode does not work, then use this manual proceedure.
1) Have the USB cable unplugged.
2) Near the HDMI port are 2 holes in each corner. One is the blue LED hole.
The other in the corner is a reset button under the hole.
Use a paper clip or something to push the reset button in this hole.
I actually enlarged the hole so a paper clip would fit.
You will feel the button "click" when you are on it.
3) Hold this button down and while holding it, plug the USB cable from the PC to the OTG port on the mk808.
4) YOu should here windows BONG it found a new device. The LED will not light!
5) You are now in ROM flash mode. Read below for installing drivers.
From README FIRST.TXT
Flash mode using the reset button:
If you do not ever see the flash tool say "Found RKAndroid MASS Storage USB"
Or reboot to flash mode does not work, then use this manual proceedure.
1) Have the USB cable unplugged.
2) Near the HDMI port are 2 holes in each corner. One is the blue LED hole.
The other in the corner is a reset button under the hole.
Use a paper clip or something to push the reset button in this hole.
I actually enlarged the hole so a paper clip would fit.
You will feel the button "click" when you are on it.
3) Hold this button down and while holding it, plug the USB cable from the PC to the OTG port on the mk808.
4) YOu should here windows BONG it found a new device. The LED will not light!
5) You are now in ROM flash mode. Read below for installing drivers.
Ha, shoulda known. Thanks.
Just flashed the ROM again, still no display after "INFO: Run OK" Any ideas why?
Read what I just wrote above about no TV screen with 4.2.2!
2 posts above yours.
Bob
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
This is something that needs to be fixed by ALL TV stick makers or the amount of returned products will grow leaps and bounds as 4.2.2 becomes the standard ROM these ship with.
It might be something with EDID setting interlaced or progressive output?
It might be some format change that some TV cant support?
Other possibilities why?
Someone with TV equipment that can analyze the output needs to look at this. I am sure it can be fixed but until we know what it is, it's a guessing game!
Only thing I might ask you guys with this problem is try playing with your TV settings. Also if you have a HDMI switch or something, try going through that. Some of them may normalize the signals.
Bob
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
Had been playing around for a few weeks with the stock rom.
Everything worked oke.
Then i saw this this update.
Before i tried flashing i tried to identify my MK808 and looks like an original.
It has the RK901 chip.
Then i tried flashing.
i have read the instructions and went for it.
I could only get it in flashmode with the pinhole thingy.
The flash tool erased the nand perfectly.
Then i tried flashing but as soon as it should start to write
an error appears.
the file cant be loaded.
I'm trying to download a app from my dropbox but it will not let me install I can't even press the install tab but I can press cancel with no problem. Any Help!
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment