Kitkat Kernels for All (well most!)

[d33]

I'm now getting an OS error:

"android.process.acore has stopped" followed by "Unfortunately Android Keyboard (AOSP) has stopped"

I'm assuming it is caused by me turning on kernel support for TV output but don't know why.

[d33]

Good news. It would be helpful for those of us who can't easily run the patching scripts if you could release CPU frequencies at 1.6GHz for T and non-T cpu's. I can run at 1.6 but cannot run at 1.8. Memory works well at 800. GPU changes seem to have no effect. Just a thought. Thanks again for the good work on this.

I'm sure someone will do it for you. I currently generate 18 kernels per release. I think that's my bit done, don't you?

[d33]

Can a few people try this and see if you get similar errors?

AP6210 V3.10

[Max One]

My cx 919II wont start with this kernel kernel_310_TV.img.

Edit: I tested it again. Now it starts, the bootlogo has the same size as HD Kernel
Edit2 : Indeed its a HD kernel

[d33]

My cx 919II wont start with this kernel

Hmmm .... I've replaced the link with a full pack. Try again?

I re-flashed the OS and the errors haven't re-appeared.

[Max One]

This kernel_t_AP6210_SD_v310.img has the same bootlogo size at start as this one kernel_t_AP6210_HD_v310.img. Normally the bootlogo should be much bigger of the sd kernel.

No other errors except this above

[d33]

This Kernel kernel_t_AP6210_SD_v310.img has the same Bootlogo at start as this one kernel_t_AP6210_HD_v310.img

No other errors except this above

So they boot, work and audio ok? HDMI zoom?

[d33]

AP6210-J22 v3.10
AP6330 v3.10

[Max One]

Yep, everything is working, let me test this package AP6210-J22 v3.10. I´ll report back in some min.

[Max One]

Did u changed the startlogo of the SD kernel? It still has the same size as the HD Kernel. It should be bigger

[Finless]

D33 is the MAN!



Bob

[Max One]

Indeed, he really rocks

[Sarco]

I test 3.0 great! I do not have audio passthrue, is it my install or not yet? T428

[d33]

I test 3.0 great! I do not have audio passthrue, is it my install or not yet? T428

Do you mean 5.1 audio? That is supported in the kernel but needs OS support libmedia something-or-other.

Or do you mean there is no sound at all?

[Sarco]

Do you mean 5.1 audio? That is supported in the kernel but needs OS support libmedia something-or-other.

Or do you mean there is no sound at all?

Sound is OK, just 5.1... so will wait for update in 4.4 thanks and again great kernel!