If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I tried to install the Full Flash - K-R42 Hybrid Firmware (HFW) 3.2 by lewy20041 Firmware
and i tried more firmwares, but i got the next error that is shown on the picture
Now is my question, is my Box now ready for the garbage or can i repair it?
What I recommend is that you first Erase the IDB using either RKAndroid Tool 1.37 or Finless ROM Flash Tool 1.37 .
Then Flash the above ROM using RKBatchTool 1.7 , and it should go through without errors, and your Android box will automatically reboot back into the stock firmware.
What I recommend is that you first Erase the IDB using either RKAndroid Tool 1.37 or Finless ROM Flash Tool 1.37 .
Then Flash the above ROM using RKBatchTool 1.7 , and it should go through without errors, and your Android box will automatically reboot back into the stock firmware.
Now i got the problem that the HDMI port is blinking and finally the screen goes black. With the AV cable i get everything on my screen, but it's black/white
But on an another tv it is working good! What's wrong with my Television, both TV's are fullHD etc. One TV is samsung and the other is Philips. Samsung TV is working good
I'm glad to hear that you were able to unbrick your unit.
Was the HDMI issue there when you first got the box, or only now that you have re-flashed it?
Have you tried using another HDMI cable? I also had issues with mine until I tried a different cable. Obviously you'll need a MicroHDMI cable such as this..
I'm glad to hear that you were able to unbrick your unit.
Was the HDMI issue there when you first got the box, or only now that you have re-flashed it?
Have you tried using another HDMI cable? I also had issues with mine until I tried a different cable. Obviously you'll need a MicroHDMI cable such as this..
Now i got the problem that the HDMI port is blinking and finally the screen goes black. With the AV cable i get everything on my screen, but it's black/white
Hello,
If possible could you please help me by giving a step by step description of how you managed to unbrick your Q7?
Do you still have the firmware and tools used? The second link for the firmware no longer works either,,,
I would greatly appreciate any help you can provide,
Thank you.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment