MK802 IV NEOTV CR 1.0 Neomode Custom Rom 4.2.2

[BrunoNRG]

Ok, thanks, I'll change to channel 1. But if that is the problem, shouldn't it also happen on the other devices using my home wifi? I also have a desktop connected to the same router but using ethernet / rj45 connection.

[neomode]

It is the Problem, your other Device´s have good WiFi Antennas.
But the Stick not try it and you will see ;-)

Neomode

[BrunoNRG]

These two were just taken:

Judging from the number of wifi networks using channel 1, I would say that they had the same idea you did. Should I change to channel 3?


Still detecting all my neighbours wifi networks


The last 5 tests, from 16:03 to 16:14, were made after I changed to channel 1

I think it worked, many thanks!!!!

[neomode]

Your Welcome :-)
When to much on Chanell 1 go to 3 or 14 if supported !

Neomode

[BrunoNRG]

Ok, thank you so much

I think channel 14 ain't supported, it doesn't show on the router channel list.


Edit: Just made another wifi speedtest, download speed has dropped to
1.78mbps... If I disconnect and connect again it will go back to 12mbps

Edit 2: Changed to channel 9, so far it seems to be working ok

[sam321]

A Big thanks to neomode for this. and as for the video micro jitter I don't see it personally, if you have to look really hard to see then it is not a problem for me as I do not analyze every frame

[blackstarr]

I do see the video jitter in in rk3188 comparing it side by side with my rk3066, esp in real 1080p res. Though it is still acceptable but it's a bit annoying that the latter is performing better. Hopefully the newly release sdk 2.0 should resolve this.

[neomode]

AW: MK802 IV NEOTV CR 1.0 Neomode Custom Rom 4.2.2

Right now I have a SDK 2.0 IMG and Test it. Will see and Report back.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[nimmer]

How do I install this ROM?

Can I do it from a Mac or do I need Windows?

/nimmer

[blackstarr]

Right now I have a SDK 2.0 IMG and Test it. Will see and Report back.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

Thanks, Neo. Nice to hear that.

[neomode]

O.k some News on the SDK2 System.img.
It Boot´s but no Wifi and Bluetooth.
Keep on Working for it.

Neomode

[zyonee]

O.k some News on the SDK2 System.img.
It Boot´s but no Wifi and Bluetooth.
Keep on Working for it.

Neomode

Not wanting to sound needy or impatient, but... I'm personally using an Ethernet adapter and not using bluetooth. I'd gladly test this if those fixes take time.

Thanks for your nice work on this.

[neomode]

Thanks good to know. But i want WiFi get to Work.
When i have a Rom that Boot and Work you can Test it.
Can you gave me the Driver you use for your Ethernet Adapter ?

Thanks

Neomode

[zyonee]

Thanks good to know. But i want WiFi get to Work.
When i have a Rom that Boot and Work you can Test it.
Can you gave me the Driver you use for your Ethernet Adapter ?

Thanks

Neomode

Can't test it right now, but Windows 8 reports USB\VID_0FE6&PID_9700&REV_0101 which suggests it's qf9700. I'll report back later. Do I simply use lsusb in terminal, and what parameters give the best information?

I did dmesg and lsusb. Here are the excerpts:

http://pastebin.com/uKBrqRxC

Btw, this adapter works well with reasonable speeds (~10 Mbps). I haven't tried static IP, but DHCP works well.

[itguru]

Working with Cozyzwan S400

Able to flash and working with CozysWan S400