Need to recognize firmware version for my box F7 Andoer???

[Jesi]

Hi,
I have a android box Andeor F7 and i need to flash it due it is bricked
I need a firmware for this device
I am sending a photo of the cct board for more info
Any help will be greatly appreciated.
Regards
Jesi

[gefattern]

Hi Jesi ,

please upload a good near by Picture , so nobody can see it .

With better Specs we can search for a similar Rom of another Device ,

so we need CPU/GPU/RAM/ROM/Boardnumber .... , maybe if you can

Russian or translate it you can find here a Rom :

https://4pda.ru/forum/index.php?showtopic=737324

please report

greetings

gefattern

[gefattern]

Hi,
I have a android box Andeor F7 and i need to flash it due it is bricked
I need a firmware for this device
I am sending a photo of the cct board for more info
Any help will be greatly appreciated.
Regards
Jesi

Hi Jese ,

You posted in RK3188 Thread , but you have a RK3128 Device or ???

The Link is wrong if you got a RK3128 Box .

good luck

gefattern

[Jesi]

Hi
Thanks for your reply
I am trying to upload pics with more resolution but the limit of the bandwidth of the site is limiting me for 2MB
Is there something that I can do to upload more pics with high definition
attached i am sending some pics but the definition is reduced
the original ones i am sending are more better, it seems that they are being compressed when i am uploading them
Any help will be greatley apriciated
Thanks once again,
Regards,
Jesi

[Jesi]

Hi
on the main cct board there are some spechs
XT-F7-V01
2015-0617
FCF 1530-4 94V-0 RU E232205

And on the label there is other spech
F7 8G/1G
2015--8-7
WW821 Z Xing Da

Can somebody guide me with this information for the firmware
Any help will be greatly appreciated
Regards
Jesi

[gefattern]

Hi Jesi ,

first we have to know if you have a RK3188 or RK3128 CPU , that is unclear .

Without nobody can help , and RK3128 is a new CPU , maybe there are not so

many Roms for you Device , if it is RK 3128 ???

nice Day

gefattern

[Jesi]

Hi Gefattern,
I have another box similar to this you can say its identical,
The specs on the main board are as follows:-
XT-F7-V01
2015-0617 (with the blue pcb not the green one)
and the Rom chip is SanDisk X50260971
I am trying to connect to the pc with the result of not recognizing the box
So the next step is to get into mask mode,Can you hep me out which pins do i need to short to enter in this mode
I already tried to short 8 and 9 like the hynix pic but nothing happened.. seems the pinouts are different??..
Your help is greatly appreciated
Thanks once again
Jesi

[gefattern]

Hi ,

first what Windows do u use ??? , best for flashing is Win7 .

Here a Link for MRM help :

http://ugoos.net/blog/reflashing-in-maskrom-mode-if-device-bricked

and read here :

http://freaktab.com/forum/main-category/main-forum/637675-nand-chip-mask-rom-mode-short-location

hope you get it , good luck / greetings / gefattern

[Jesi]

Hi Gefattern,
My windows os is 7 and i already done this before for another box which it was successful with all the drivers etc etc..
but my problem is that the Nand chip is not a Hynix as shown in the diagram its a SanDisk X50260971 and when i am trying to short pin 8 and 9 and also i tried 7 and 8 its not communicating with software of pc
I think the pins for maskmode are different from hynix
Do you have the pinouts for SanDisk X50260971 to enter maskmode
Thanks once again
Jessi

[gefattern]

Hi Gefattern,
My windows os is 7 and i already done this before for another box which it was successful with all the drivers etc etc..
but my problem is that the Nand chip is not a Hynix as shown in the diagram its a SanDisk X50260971 and when i am trying to short pin 8 and 9 and also i tried 7 and 8 its not communicating with software of pc
I think the pins for maskmode are different from hynix
Do you have the pinouts for SanDisk X50260971 to enter maskmode
Thanks once again
Jessi

Hi ,

did you try 6/7 and 29/30 like the other Pictures in Ugoos Link say , or maybe

your Box hsa this 2small plates "like discribed in Ugoos Link" , your Picutres

are to small to see .

Maybe you can find here some Infos many Pages , but russian :

https://4minipc.ru/blog/81-mask-rom-...-kirpicha.html

good luck / gefattern

[Jesi]

Hi,Gefattern
I will try these pins and take a look in that site..
I let you know what is my result later on.
Thanks once again,
Jesi