If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
@ademturk, regrettably that isn't so easy. Kernel from other firmware might not be compatible
with new one and kernel compiled for other devices will almost always refuse to work.
In theory it should be possible to modify/prepare resource.img and use new kernel designed for new firmware on other than planed device but there are some problems as well. For example HPH 3288 and UGOTOS UT3 use three GPIOs in conjunction with PMIC (act8846) and Beelink R89 and FireFly use only two. Then how to prepare resource file?
RK3288 2GB/16GB OC 1.9GHz at 1.2V RAM [email protected] Wasser's 3.0.11 firmware
Out: monitor FullHD 16:9, 3.5" jack headphones; In: remote control, USB HUB: keyboard + mouse + pendrive
bricked: VOYO V1 mini 8G/64GB Windows 10
@ademturk, regrettably that isn't so easy. Kernel from other firmware might not be compatible
with new one and kernel compiled for other devices will almost always refuse to work.
In theory it should be possible to modify/prepare resource.img and use new kernel designed for new firmware on other than planed device but there are some problems as well. For example HPH 3288 and UGOTOS UT3 use three GPIOs in conjunction with PMIC (act8846) and Beelink R89 and FireFly use only two. Then how to prepare resource file?
so far i have no luck with any of the r89 rom stock or custom i keep getting micro freeze where the whole os freezers every 5- 10 seconds for about 1 second its not just the video the whole system including air mouse courser i tried different hdmi cable and hdmi ports but i will reinstall the ugoos ut3 F/W and see if it happens again and buy the way just pressing the reset button no longer works for me i have open up box and connect a cable in the 2 holes then rkbatch toool says found masked device or something. is there way to fix that.
People should only support Rockchip partner companies or companies that use their boards and provide support to the end user.
So far I've seen the companies that provide Nagrace, Beelink and the HTC boxes with boards.
Here are the partner companies: http://www.rock-chips.com/a/en/About...dex-136-1.html
so far i have no luck with any of the r89 rom stock or custom i keep getting micro freeze where the whole os freezers every 5- 10 seconds for about 1 second its not just the video the whole system including air mouse courser i tried different hdmi cable and hdmi ports but i will reinstall the ugoos ut3 F/W and see if it happens again
Please report your finding. I've got similar experience but after disabling EXT4 Jurnaling and flush iptables bw_INPUT and bw_OUTPUT chains it is much less frequent and each freeze occurance is shorter.
By the way just pressing the reset button no longer works for me i have open up box and connect a cable in the 2 holes then rkbatch toool says found masked device or something. is there way to fix that.
How so? Do you remember to connect USB OTG cable to working PC and then plug power adapter while pressing this reset switch inside AV jack? If above doesn't work try software switch from Android_Tool application but it might not work when you don't have "stock" bootloader.
RK3288 2GB/16GB OC 1.9GHz at 1.2V RAM [email protected] Wasser's 3.0.11 firmware
Out: monitor FullHD 16:9, 3.5" jack headphones; In: remote control, USB HUB: keyboard + mouse + pendrive
bricked: VOYO V1 mini 8G/64GB Windows 10
Please report your finding. I've got similar experience but after disabling EXT4 Jurnaling and flush iptables bw_INPUT and bw_OUTPUT chains it is much less frequent and each freeze occurance is shorter.
How so? Do you remember to connect USB OTG cable to working PC and then plug power adapter while pressing this reset switch inside AV jack? If above doesn't work try software switch from Android_Tool application but it might not work when you don't have "stock" bootloader.
like i said connecting cable to pc and connecting power while holding reset switch inside av hole does nothing for me i have open the box and put a pin on the two hole's connecting them together then i follow the normal procedure then i can flash F/W
No idea which factory produce the
ZX009 V02 2014.10.15
If I'm searching for 'ZX RockChip' I will find some pads (at best case rk3188)...
Also 'PMD928' isn't really helpful...
So only we got link on alibaba (from your first message in this topic). Work fine. Want now full backup for try trwp and ubuntu but I see backup is not simple for rk3288. Software in not root but I rooting it with Towelroot in one click without PC.
I can't seem to find this board from those pictures. Can some one tell me please what firmware I can use with this chip and board. Sorry the Pic is grainy it's a rk 3288. Htc to33D v1. 2014 11 19. Thanks
You may only view thumbnails in this gallery.
This gallery has 1 photos.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment