OTT-928 TV Box RK3288 - 2GB RAM - 16GB Storage (pre-order available)

[robbo990]

At first, does your device have HTC-031 or HTC-032 PCB revision inside?
I suppose your box is MK902II and has HTC-032, mine one is HTC-031 based.
Are you speaking about 65Mbit/s connection speed(in wifi setting properties) or real score while doing speedtest?
Because I have 65Mbit/s wireless connection speed too, but the real speed no more than 19. Ethernet shows me about real 700Mbit/s from my gigabit ISP connection.

Mine appears to be V1.0 rather than the V0.2 I've seen posted...... wonder if there is much difference?

[no_spam_for_me]

[ATTACH=CONFIG]8824[/ATTACH]



Mine appears to be V1.0 rather than the V0.2 I've seen posted...... wonder if there is much difference?

Could you please take some pictures from the whole pcb (both sides) for the overview thread?
THX

[robbo990]

Could you please take some pictures from the whole pcb (both sides) for the overview thread?
THX

[no_spam_for_me]

please "the whole pcb (both sides)"

[bach0405]

Hi,
from here :


pan.baidu.com/wap/share/home?uk=4213728113&third=0

new firmware ? dated 11/11
pan.baidu.com/s/1sjpvmUT?third=0&num=20&dir=%2F创思奇产品软件文件夹%2FCS928固 件%2F11月11号软件&page=1

[digger]

new firmware ? dated 11/11
pan.baidu.com/s/1sjpvmUT?third=0&num=20&dir=%2F创思奇产品软件文件夹%2FCS928固 件%2F11月11号软件&page=1

Hi,
If you have it already downloaded from this terrible baidu place, would you be so kind to reupload it somewhere else? I had more than 10 attempts, but wasn't able.
Thanks

[bach0405]

Hi,
I succeeded to download it. I am in the process to upload it to mediafire. Since my upload speed is very slow and I have to go to work, I will give you the link in a few hours.


Cheers

[digger]

Hi,
I succeeded to download it. I am in the process to upload it to mediafire. Since my upload speed is very slow and I have to go to work, I will give you the link in a few hours.


Cheers

Thank you much bady
I've just seen your message.
Please don't worry because I managed to download it last deep night from another baidu link.
So if you still have not done it there isn't necissity to go on now.

[bach0405]

Thank you much bady
I've just seen your message.
Please don't worry because I managed to download it last deep night from another baidu link.
So if you still have not done it there isn't necissity to go on now.

anyway,
for people who want it :

http://www.mediafire.com/download/x9zhssx2nese2ea/T031_chuangsiqi_CS928_AP6330_20141111.rar

[bearryuji]

Thanks....

[robbo990]

Firmware

What's the procedure for flashing these boxes? Only had CX919 and MK908 previously, easy to flash...via USB to OTG whilst pressing the button, install drivers and run rktool. Can't get the CS928 to connect.... Am I missing something? #Noob

[ovecka]

It's the same. The button that gets you to the loader is on the bottom of the box. I had to hold it for several seconds to get it connected.

[robbo990]

It's the same. The button that gets you to the loader is on the bottom of the box. I had to hold it for several seconds to get it connected.

Tried several times, nothing, no sign off life. Maybe a faulty button :-(

[bearryuji]

Tried several times, nothing, no sign off life. Maybe a faulty button :-(

https://www.dropbox.com/s/ugtrjpocjh6jgok/EN%20CS918IICS928Firmware%20upgrade%20Vedio.rar?dl=0

Maybe this video help.

[bach0405]

new firmare with XBMC UI ?

Hi,

found on baidu

pan.baidu.com/wap/shareview?&shareid=3605073897&uk=4213728113&dir=%2 F创思奇产品软件文件夹%2FCS928固件%2F12月25号双UI加XBMC插件&page=1&nu m=20&fsid=901665465763438&third=0
Cheers