Announcement

Collapse
No announcement yet.

my ott cs928 Device Bricked and unBricked

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    my ott cs928 Device Bricked and unBricked

    my ott cs928 Device Bricked hellp , android tools se Loder Device IN ADVANCE SETINGS reset Device end I ENTER TO Maskrom MOD

    MY ERRORS

    Error:EnumerateHubPorts-->DeviceIoControl failed,err=0x48f

    10:06:19 426 AndroidTool v2.2.1.0 start run
    10:07:19 728 Error:ReadIDBProc-->no found any idblock
    10:07:58 456 Layer<7-1>ownload Boot Start
    10:08:00 789 Layer<7-1>ownload Boot Success
    10:08:00 789 Layer<7-1>:Wait For Maskrom Start
    10:08:01 281 Layer<7-1>:Wait For Maskrom Success
    10:08:01 291 Layer<7-1>:Test Device Start
    10:08:01 291 Layer<7-1>:Test Device Success
    10:08:01 301 Layer<7-1>:Check Chip Start
    10:08:01 301 Layer<7-1>: Check Chip Success
    10:08:01 301 Layer<7-1>:Get FlashInfo Start
    10:08:01 301 <LAYER 7-1> INFO:FlashInfo: 00 00 00 00 00 04 04 00 28 00 00
    10:08:01 311 Layer<7-1>:Get FlashInfo Success
    10:08:01 311 Layer<7-1>:Prepare IDB Start
    10:08:01 311 <LAYER 7-1> ERROR:PrepareIDB-->No Found 1st Flash CS
    10:08:01 311 Error:Layer<7-1>:Prepare IDB Fail
    10:17:47 279 AndroidTool v2.2.1.0 start run
    10:26:19 791 AndroidTool v2.2.1.0 start run
    10:42:07 484 AndroidTool v2.2.1.0 start run
    11:06:53 364 AndroidTool v2.2.1.0 start run
    14:29:40 127 AndroidTool v2.2.1.0 start run
    14:35:22 065 AndroidTool v2.2.1.0 start run
    14:35:38 571 <LAYER 7-1> ERROR:Boot_VendorRequest-->DeviceIoControl failed,Total(16386),Sended(0),bRet(1),err(0)
    14:35:38 571 <LAYER 7-1> ERRORownloadBoot-->Boot_VendorRequest471 failed,index(0)
    14:35:49 678 <LAYER 7-1> ERROR:Boot_VendorRequest-->DeviceIoControl failed,Total(43010),Sended(0),bRet(1),err(0)
    14:35:49 678 <LAYER 7-1> ERRORownloadBoot-->Boot_VendorRequest472 failed,index(0)
    14:35:54 550 AndroidTool v2.2.1.0 start run
    14:35:56 375 Error:RKU_Write-->WriteFile failed,bRet=0,err=31,size=31,write=0
    14:35:56 578 Error:RKU_ClearBuffer-->ReadFile failed,bRet=0,err=31,size=512,read=0
    14:35:56 578 Error:ResetDeviceProc-->RKU_ResetDevice failed,err=-3
    14:36:03 577 Error:RKU_Write-->WriteFile failed,bRet=1,err=0,size=31,write=0
    14:36:08 785 Error:RKU_ClearBuffer-->totalRead=0
    14:36:13 792 Error:RKU_Write-->WriteFile failed,bRet=1,err=0,size=31,write=0
    14:36:19 003 Error:RKU_ClearBuffer-->totalRead=0
    14:36:19 003 <LAYER 7-1> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-3),path=\\?\USB#VID_2207&PID_320A#5&218AA817&0&1#{ a5dcbf10-6530-11d2-901f-00c04fb951ed}
    14:36:25 024 Error:RKU_Write-->WriteFile failed,bRet=1,err=0,size=31,write=0
    14:36:30 235 Error:RKU_ClearBuffer-->totalRead=0
    14:36:35 242 Error:RKU_Write-->WriteFile failed,bRet=1,err=0,size=31,write=0
    14:36:40 447 Error:RKU_ClearBuffer-->totalRead=0
    14:36:40 447 <LAYER 7-1> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-3),path=\\?\USB#VID_2207&PID_320A#5&218AA817&0&1#{ a5dcbf10-6530-11d2-901f-00c04fb951ed}
    14:36:45 788 Error:RKU_Write-->WriteFile failed,bRet=0,err=995,size=31,write=0
    14:36:45 991 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_320A#5&218A A817&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    14:36:45 991 <LAYER 7-1> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-3),path=\\?\USB#VID_2207&PID_320A#5&218AA817&0&1#{ a5dcbf10-6530-11d2-901f-00c04fb951ed}


    22:07:36 941 Layer<8-6>download Boot Start
    22:07:36 994 <LAYER 8-6> ERROR:Boot_VendorRequest-->DeviceIoControl failed,Total(12290),Sended(0),bRet(0),err(31)
    22:07:36 994 <LAYER 8-6> ERRORdownloadBoot-->Boot_VendorRequest471 failed,index(0)
    22:07:36 997 Errorlayer<8-6>download Boot Fail
    22:07:37 000 Layer<8-6>: RunProc is ending, ret=0
    22:07:46 163 Layer<8-6>download Boot Start
    22:07:48 356 Layer<8-6>download Boot Success
    22:07:48 362 Layer<8-6>:Wait For Maskrom Start
    22:07:48 873 Layer<8-6>:Wait For Maskrom Success
    22:07:48 879 Layer<8-6>:Test Device Start
    22:07:48 885 Layer<8-6>:Test Device Success
    22:07:48 891 Layer<8-6>:Check Chip Start
    22:07:48 895 Layer<8-6>: Check Chip Success
    22:07:48 899 Layer<8-6>:Get FlashInfo Start
    22:07:48 900 <LAYER 8-6> INFO:FlashInfo: 00 00 00 00 00 04 04 00 28 00 00
    22:07:48 903 Layer<8-6>:Get FlashInfo Success
    22:07:48 907 Layer<8-6>repare IDB Start
    22:07:48 908 <LAYER 8-6> ERRORrepareIDB-->No Found 1st Flash CS
    22:07:48 911 Error layer<8-6>repare IDB Fail
    22:07:48 914 Layer<8-6>: RunProc is ending, ret=0

    **********Upgrade Action**********
    **********Upgrade Start Total<1>**********
    <Layer 3-2> Download Boot Start
    <Layer 3-2> Download Boot Success
    <Layer 3-2> Wait For Maskrom Start
    <Layer 3-2> Wait For Maskrom Success
    <Layer 3-2> Test Device Start
    <Layer 3-2> Test Device Success
    <Layer 3-2> Check Chip Start
    <Layer 3-2> Check Chip Success
    <Layer 3-2> Get FlashInfo Start
    <Layer 3-2> Get FlashInfo Success
    <Layer 3-2> Prepare IDB Start
    <Layer 3-2> Prepare IDB Fail
    **********Upgrade Done Success<0> Fail<1> Time<3105>ms**********


    Last edited by gumymoty; 03-30-2015, 00:18.

    #2
    Hello,

    Try the following:

    1.: A different USB Port
    2.: Connect the Power Supply while Flashing

    Seems to me the Device get not enough Power for Flashing.

    Regards
    Neomode

    Comment


      #3
      Maybe you should use newer AndroidTool and drivers
      http://www.freaktab.com/showthread.p...l=1#post219459
      RK3288 Devices
      - Overview BOX (LINK !)
      - Overview STICK (Dongle) (LINK !)

      MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
      UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
      Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
      Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

      RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
      Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

      Comment


        #4
        my box is alive done 100%

        thank all for reply me

        my log

        **********Restore Action**********
        **********Restore Start Total<1>**********
        <Layer 3-2> Download Boot Start
        <Layer 3-2> Download Boot Success
        <Layer 3-2> Wait For Maskrom Start
        <Layer 3-2> Wait For Maskrom Success
        <Layer 3-2> Test Device Start
        <Layer 3-2> Test Device Success
        <Layer 3-2> Check Chip Start
        <Layer 3-2> Check Chip Success
        <Layer 3-2> Get FlashInfo Start
        <Layer 3-2> Get FlashInfo Success
        <Layer 3-2> Prepare IDB Start
        <Layer 3-2> Prepare IDB Success
        <Layer 3-2> Download IDB Start
        <Layer 3-2> Download IDB Success
        <Layer 3-2> Reset Device Start
        <Layer 3-2> Reset Device Success
        <Layer 3-2> Wait For Loader Start
        <Layer 3-2> Wait For Loader Success
        <Layer 3-2> Test Device Start
        <Layer 3-2> Test Device Success
        <Layer 3-2> Lowerformat Device Start
        <Layer 3-2> Lowerformat Device Success
        <Layer 3-2> Test Device Start
        <Layer 3-2> Test Device Success
        <Layer 3-2> Check Chip Start
        <Layer 3-2> Check Chip Success
        <Layer 3-2> Get FlashInfo Start
        <Layer 3-2> Get FlashInfo Success
        <Layer 3-2> Prepare IDB Start
        <Layer 3-2> Prepare IDB Success
        <Layer 3-2> Download IDB Start
        <Layer 3-2> Download IDB Success
        <Layer 3-2> Reset Device Start
        <Layer 3-2> Reset Device Success
        <Layer 3-2> Wait For Loader Start
        <Layer 3-2> Wait For Loader Success
        <Layer 3-2> Test Device Start
        <Layer 3-2> Test Device Success
        <Layer 3-2> Download Firmware Start
        <Layer 3-2> Download Firmware Success
        <Layer 3-2> Reset Device Start
        <Layer 3-2> Reset Device Success
        **********Restore Done Success<1> Fail<0> Time<89077>ms**********

        Comment

        Working...
        X