Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

my ott cs928 Device Bricked and unBricked

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    my ott cs928 Device Bricked and unBricked

    my ott cs928 Device Bricked hellp , android tools se Loder Device IN ADVANCE SETINGS reset Device end I ENTER TO Maskrom MOD

    MY ERRORS

    Error:EnumerateHubPorts-->DeviceIoControl failed,err=0x48f

    10:06:19 426 AndroidTool v2.2.1.0 start run
    10:07:19 728 Error:ReadIDBProc-->no found any idblock
    10:07:58 456 Layer<7-1>ownload Boot Start
    10:08:00 789 Layer<7-1>ownload Boot Success
    10:08:00 789 Layer<7-1>:Wait For Maskrom Start
    10:08:01 281 Layer<7-1>:Wait For Maskrom Success
    10:08:01 291 Layer<7-1>:Test Device Start
    10:08:01 291 Layer<7-1>:Test Device Success
    10:08:01 301 Layer<7-1>:Check Chip Start
    10:08:01 301 Layer<7-1>: Check Chip Success
    10:08:01 301 Layer<7-1>:Get FlashInfo Start
    10:08:01 301 <LAYER 7-1> INFO:FlashInfo: 00 00 00 00 00 04 04 00 28 00 00
    10:08:01 311 Layer<7-1>:Get FlashInfo Success
    10:08:01 311 Layer<7-1>:Prepare IDB Start
    10:08:01 311 <LAYER 7-1> ERROR:PrepareIDB-->No Found 1st Flash CS
    10:08:01 311 Error:Layer<7-1>:Prepare IDB Fail
    10:17:47 279 AndroidTool v2.2.1.0 start run
    10:26:19 791 AndroidTool v2.2.1.0 start run
    10:42:07 484 AndroidTool v2.2.1.0 start run
    11:06:53 364 AndroidTool v2.2.1.0 start run
    14:29:40 127 AndroidTool v2.2.1.0 start run
    14:35:22 065 AndroidTool v2.2.1.0 start run
    14:35:38 571 <LAYER 7-1> ERROR:Boot_VendorRequest-->DeviceIoControl failed,Total(16386),Sended(0),bRet(1),err(0)
    14:35:38 571 <LAYER 7-1> ERRORownloadBoot-->Boot_VendorRequest471 failed,index(0)
    14:35:49 678 <LAYER 7-1> ERROR:Boot_VendorRequest-->DeviceIoControl failed,Total(43010),Sended(0),bRet(1),err(0)
    14:35:49 678 <LAYER 7-1> ERRORownloadBoot-->Boot_VendorRequest472 failed,index(0)
    14:35:54 550 AndroidTool v2.2.1.0 start run
    14:35:56 375 Error:RKU_Write-->WriteFile failed,bRet=0,err=31,size=31,write=0
    14:35:56 578 Error:RKU_ClearBuffer-->ReadFile failed,bRet=0,err=31,size=512,read=0
    14:35:56 578 Error:ResetDeviceProc-->RKU_ResetDevice failed,err=-3
    14:36:03 577 Error:RKU_Write-->WriteFile failed,bRet=1,err=0,size=31,write=0
    14:36:08 785 Error:RKU_ClearBuffer-->totalRead=0
    14:36:13 792 Error:RKU_Write-->WriteFile failed,bRet=1,err=0,size=31,write=0
    14:36:19 003 Error:RKU_ClearBuffer-->totalRead=0
    14:36:19 003 <LAYER 7-1> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-3),path=\\?\USB#VID_2207&PID_320A#5&218AA817&0&1#{ a5dcbf10-6530-11d2-901f-00c04fb951ed}
    14:36:25 024 Error:RKU_Write-->WriteFile failed,bRet=1,err=0,size=31,write=0
    14:36:30 235 Error:RKU_ClearBuffer-->totalRead=0
    14:36:35 242 Error:RKU_Write-->WriteFile failed,bRet=1,err=0,size=31,write=0
    14:36:40 447 Error:RKU_ClearBuffer-->totalRead=0
    14:36:40 447 <LAYER 7-1> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-3),path=\\?\USB#VID_2207&PID_320A#5&218AA817&0&1#{ a5dcbf10-6530-11d2-901f-00c04fb951ed}
    14:36:45 788 Error:RKU_Write-->WriteFile failed,bRet=0,err=995,size=31,write=0
    14:36:45 991 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_320A#5&218A A817&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    14:36:45 991 <LAYER 7-1> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-3),path=\\?\USB#VID_2207&PID_320A#5&218AA817&0&1#{ a5dcbf10-6530-11d2-901f-00c04fb951ed}


    22:07:36 941 Layer<8-6>download Boot Start
    22:07:36 994 <LAYER 8-6> ERROR:Boot_VendorRequest-->DeviceIoControl failed,Total(12290),Sended(0),bRet(0),err(31)
    22:07:36 994 <LAYER 8-6> ERRORdownloadBoot-->Boot_VendorRequest471 failed,index(0)
    22:07:36 997 Errorlayer<8-6>download Boot Fail
    22:07:37 000 Layer<8-6>: RunProc is ending, ret=0
    22:07:46 163 Layer<8-6>download Boot Start
    22:07:48 356 Layer<8-6>download Boot Success
    22:07:48 362 Layer<8-6>:Wait For Maskrom Start
    22:07:48 873 Layer<8-6>:Wait For Maskrom Success
    22:07:48 879 Layer<8-6>:Test Device Start
    22:07:48 885 Layer<8-6>:Test Device Success
    22:07:48 891 Layer<8-6>:Check Chip Start
    22:07:48 895 Layer<8-6>: Check Chip Success
    22:07:48 899 Layer<8-6>:Get FlashInfo Start
    22:07:48 900 <LAYER 8-6> INFO:FlashInfo: 00 00 00 00 00 04 04 00 28 00 00
    22:07:48 903 Layer<8-6>:Get FlashInfo Success
    22:07:48 907 Layer<8-6>repare IDB Start
    22:07:48 908 <LAYER 8-6> ERRORrepareIDB-->No Found 1st Flash CS
    22:07:48 911 Error layer<8-6>repare IDB Fail
    22:07:48 914 Layer<8-6>: RunProc is ending, ret=0

    **********Upgrade Action**********
    **********Upgrade Start Total<1>**********
    <Layer 3-2> Download Boot Start
    <Layer 3-2> Download Boot Success
    <Layer 3-2> Wait For Maskrom Start
    <Layer 3-2> Wait For Maskrom Success
    <Layer 3-2> Test Device Start
    <Layer 3-2> Test Device Success
    <Layer 3-2> Check Chip Start
    <Layer 3-2> Check Chip Success
    <Layer 3-2> Get FlashInfo Start
    <Layer 3-2> Get FlashInfo Success
    <Layer 3-2> Prepare IDB Start
    <Layer 3-2> Prepare IDB Fail
    **********Upgrade Done Success<0> Fail<1> Time<3105>ms**********


    Last edited by gumymoty; 03-30-2015, 09:18.
    Tags: cs928 device bricked
    #2
    Hello,

    Try the following:

    1.: A different USB Port
    2.: Connect the Power Supply while Flashing

    Seems to me the Device get not enough Power for Flashing.

    Regards
    Neomode

    Comment

      #3
      Maybe you should use newer AndroidTool and drivers
      Forums - FreakTab
      http://www.freaktab.com/showthread.php?16490-Beelink-R89-UBOX-ROM-Tools-release&p=219459&viewfull=1#post219459
      vBulletin Forums
      RK3288 Devices
      - Overview BOX (LINK !)
      - Overview STICK (Dongle) (LINK !)

      MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
      UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
      Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
      Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

      RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
      Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

      Comment

        #4
        my box is alive done 100%

        thank all for reply me

        my log

        **********Restore Action**********
        **********Restore Start Total<1>**********
        <Layer 3-2> Download Boot Start
        <Layer 3-2> Download Boot Success
        <Layer 3-2> Wait For Maskrom Start
        <Layer 3-2> Wait For Maskrom Success
        <Layer 3-2> Test Device Start
        <Layer 3-2> Test Device Success
        <Layer 3-2> Check Chip Start
        <Layer 3-2> Check Chip Success
        <Layer 3-2> Get FlashInfo Start
        <Layer 3-2> Get FlashInfo Success
        <Layer 3-2> Prepare IDB Start
        <Layer 3-2> Prepare IDB Success
        <Layer 3-2> Download IDB Start
        <Layer 3-2> Download IDB Success
        <Layer 3-2> Reset Device Start
        <Layer 3-2> Reset Device Success
        <Layer 3-2> Wait For Loader Start
        <Layer 3-2> Wait For Loader Success
        <Layer 3-2> Test Device Start
        <Layer 3-2> Test Device Success
        <Layer 3-2> Lowerformat Device Start
        <Layer 3-2> Lowerformat Device Success
        <Layer 3-2> Test Device Start
        <Layer 3-2> Test Device Success
        <Layer 3-2> Check Chip Start
        <Layer 3-2> Check Chip Success
        <Layer 3-2> Get FlashInfo Start
        <Layer 3-2> Get FlashInfo Success
        <Layer 3-2> Prepare IDB Start
        <Layer 3-2> Prepare IDB Success
        <Layer 3-2> Download IDB Start
        <Layer 3-2> Download IDB Success
        <Layer 3-2> Reset Device Start
        <Layer 3-2> Reset Device Success
        <Layer 3-2> Wait For Loader Start
        <Layer 3-2> Wait For Loader Success
        <Layer 3-2> Test Device Start
        <Layer 3-2> Test Device Success
        <Layer 3-2> Download Firmware Start
        <Layer 3-2> Download Firmware Success
        <Layer 3-2> Reset Device Start
        <Layer 3-2> Reset Device Success
        **********Restore Done Success<1> Fail<0> Time<89077>ms**********

        Comment

        Previous template Next

        What's Going On

        Collapse

        There are currently 10389 users online. 7 members and 10382 guests.

        Most users ever online was 16,134 at 08:28 on 08-11-2023.

        Working...
        X

        We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

        By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

        I Agree