Ugoos UT3S - USB Video Grabber

[ZORGooS]

Hi all
I have Ugoos UT3S 2/16 with firmware v. 0.3.1 based on Ubuntu 15.04 on SD card.
I am trying to set a Geniatech OTG102 as analog USB Video Grabber.
I need drivers cx25840 and cx231xx. Is it right?

I found this drivers: https://github.com/mopplayer/Firefly...x231xx-cards.c

How can I load them into the kernel?

Thank you

[mo123]

Hi all
I have Ugoos UT3S 2/16 with firmware v. 0.3.1 based on Ubuntu 15.04 on SD card.
I am trying to set a Geniatech OTG102 as analog USB Video Grabber.
I need drivers cx25840 and cx231xx. Is it right?

I found this drivers: https://github.com/mopplayer/Firefly...x231xx-cards.c

How can I load them into the kernel?

Thank you

Hi

You cam compile the Firefly kernel but then compile the drivers you need as modules instead of built into the kernel.
You can then load the modules *.ko files into any UGOOS firmware by adding something to an init.d script on startup like insmod system/lib/cx231.ko for example.

[ZORGooS]

Mhmm.. too hard for my knowladge.

So I found these 2 files:
v4l-cx231xx-avcore-01.fw
v4l-cx25840.fw

Where do I have to put them? drivers/media/usb/..?

[Ben.Efrati]

Mhmm.. too hard for my knowladge.

So I found these 2 files:
v4l-cx231xx-avcore-01.fw
v4l-cx25840.fw

Where do I have to put them? drivers/media/usb/..?

you must have both *.ko files and *.fw files.
put *.fw in /system/etc/firmware
put *.ko in /system/lib/modules

[ZORGooS]

Thank you Ben.Efrati
I did

put *.fw in /system/etc/firmware
put *.ko in /system/lib/modules

but noting changed in dmesg

[ 0.831814] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[ 0.834139] media: Linux media interface: v0.10
[ 0.834330] Linux video capture interface: v2.00
[ 0.834523] pps_core: LinuxPPS API ver. 1 registered
[ 0.834599] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.834734] PTP clock support registered
[ 0.835184] rockchip_temp_probe,line=362
[ 0.835982] tsadc ff280000.tsadc: initialized
[ 0.837257] rockchip_ion_parse_dt: num_heaps = 1
[ 0.837353] 0: 0 3 vmalloc 0x (null)
[ 0.838182] Rockchip ion module is successfully loaded (v1.0)
[ 0.838749] Advanced Linux Sound Architecture Driver Initialized.
[ 0.840088] Bluetooth: Core ver 2.16
[ 0.840247] NET: Registered protocol family 31
[ 0.840321] Bluetooth: HCI device and connection manager initialized
[ 0.840419] Bluetooth: HCI socket layer initialized
[ 0.840502] Bluetooth: L2CAP socket layer initialized
[ 0.840626] Bluetooth: SCO socket layer initialized
[ 0.841324] cfg80211: Calling CRDA to update world regulatory domain
[ 0.843675] act8846_i2c_probe,line=893
[ 0.845113] act8846_parse_dt,line=746
[ 0.846426] of_get_named_gpio_flags exited with status 225
[ 0.846472] of_get_named_gpio_flags exited with status 2
[ 0.846516] of_get_named_gpio_flags exited with status 1
[ 0.846574] act8846_i2c_probe: act8846_pmic_hold=1
[ 0.846677] act8846_i2c_probe: act8846_pmic_sleep=1
[ 0.846762] act8846_i2c_probe: act8846_pmic_pwr_hold=1
[ 0.849402] act_dcdc1: 1200 mV
[ 0.853299] vccio: 3300 mV
[ 0.855979] vdd_logic: 700 <--> 1500 mV at 1300 mV
[ 0.859752] act_dcdc4: 2000 mV
[ 0.861644] vccio_sd: 1800 <--> 3300 mV at 3300 mV
[ 0.864572] act_ldo2: 1050 mV
[ 0.867562] act_ldo3: 1800 mV
[ 0.870533] act_ldo4: 3300 mV
[ 0.873475] act_ldo5: 3300 mV
[ 0.876417] act_ldo6: 1100 mV
[ 0.879373] vcc_18: 1800 mV
[ 0.882324] act_ldo8: 1850 mV
[ 0.888994] vdd_arm: 712 <--> 1500 mV at 1100 mV
[ 0.895496] vdd_gpu: 712 <--> 1500 mV at 900 mV
[ 0.896494] rk808_i2c_probe,line=1368
[ 0.898182] The device is not rk808 -11
[ 0.898524] rk808: probe of 0-001b failed with error -11
[ 0.900953] i2s: maxburst: 16
[ 0.902662] Switching to clocksource arch_sys_counter
[ 0.923283] usb_battery_charger_detect_synop , battery_charger_detect 1, pass DCD, dcd_state = 1
[ 0.970107] rk-fb rockchip-fb: rk fb ion client create success!
[ 0.970223] rk-fb rockchip-fb: rockchip framebuffer driver probe
[ 0.971387] rk-screen rk_screen.9: rockchip screen probe success
[ 0.972282] rk32-lvds rk32-lvds: rk32 lvds driver probe success
[ 0.973000] rk32-edp ff970000.edp: screen is not edp!
[ 0.973108] rk32-edp: probe of ff970000.edp failed with error -22
[ 0.974247] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
[ 0.974999] graphics fb0: rockchip framebuffer registerd:fb0
[ 0.976097] graphics fb1: rockchip framebuffer registerd:fb1
[ 0.976696] graphics fb2: rockchip framebuffer registerd:fb2
[ 0.977308] graphics fb3: rockchip framebuffer registerd:fb3
[ 0.977893] graphics fb4: rockchip framebuffer registerd:fb4
[ 0.979573] rk_iommu ff930300.vopb_mmu: (vopb) Enabled
[ 0.979674] rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x2e26f000
[ 0.980038] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
[ 0.980146] rk3288-lcdc lcdc0: wakeup from standby!
[ 1.114838] alloc_buffer:ion_phy_addr=0x10000000
[ 1.158338] fb0hy:10000000>>vir:f0191000>>len:0x1800000
[ 1.160032] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
[ 1.161223] rockchip_set_mux:warning ignore bank num 15
[ 1.161678] rockchip_set_mux:warning ignore bank num 15
[ 1.162143] rockchip_set_mux:warning ignore bank num 15
[ 1.162588] rockchip_set_mux:warning ignore bank num 15
[ 1.163002] rockchip_set_mux:warning ignore bank num 15
[ 1.163439] rockchip_set_mux:warning ignore bank num 15
[ 1.164427] rockchip_set_mux:warning ignore bank num 15
[ 1.164961] rockchip_set_mux:warning ignore bank num 15
[ 1.165840] rockchip_set_mux:warning ignore bank num 15
[ 1.166387] rockchip_set_mux:warning ignore bank num 15
[ 1.167264] rockchip_set_mux:warning ignore bank num 15
[ 1.167801] rockchip_set_mux:warning ignore bank num 15
[ 1.168693] rockchip_set_mux:warning ignore bank num 15
[ 1.169226] rockchip_set_mux:warning ignore bank num 15
[ 1.192704] NET: Registered protocol family 2
[ 1.194212] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.194742] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.195275] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.195464] TCP: reno registered
[ 1.195540] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.195702] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.196391] NET: Registered protocol family 1
[ 1.197245] RPC: Registered named UNIX socket transport module.
[ 1.197335] RPC: Registered udp transport module.
[ 1.197401] RPC: Registered tcp transport module.
[ 1.197466] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.198005] Unpacking initramfs...
[ 1.326771] Freeing initrd memory: 4640K (c59fc000 - c5e84000)
[ 1.328327] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[ 1.329789] probe device ff9a0000.vpu_service
[ 1.330249] vpu_service: power on
[ 1.331432] checking hw id 4831
[ 1.332575] vpu_service set to auto frequency mode
[ 1.332822] vcodec vpu_service: vcodec ion client create success!
[ 1.333938] vpu_service: power off...
[ 1.334048] done
[ 1.334111] init success
[ 1.334291] probe device ff9c0000.hevc_service
[ 1.334916] hevc_service: power on
[ 1.336064] checking hw id 6867
[ 1.336957] vcodec hevc_service: vcodec ion client create success!
[ 1.337875] hevc_service: power off...
[ 1.337986] done
[ 1.338047] init success
[ 1.338416] rknandbase v1.0 2014-03-31
[ 1.339063] rknand_probe clk rate = 148500000
[ 1.339476] rknand_driver:ret = 0
[ 1.340626] audit: initializing netlink socket (disabled)
[ 1.340778] type=2000 audit(0.820:1): initialized
[ 1.343063] bounce pool size: 64 pages
[ 1.357529] exFAT: Version 1.2.9
[ 1.359609] NFS: Registering the id_resolver key type
[ 1.359769] Key type id_resolver registered
[ 1.359842] Key type id_legacy registered
[ 1.359937] Installing knfsd (copyright (C) 1996 [email protected]).
[ 1.361862] fuse init (API version 7.22)
[ 1.363168] msgmni has been set to 1458
[ 1.363365] SELinux: Registering netfilter hooks
[ 1.369665] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.369779] io scheduler noop registered
[ 1.369844] io scheduler deadline registered
[ 1.370209] io scheduler cfq registered (default)
[ 1.371621] Console: switching to colour frame buffer device 240x67
[ 1.420970] rga ff920000.rga: rga ion client create success!
[ 1.421627] rga: Driver loaded succesfully
[ 1.423209] IEP Power ON
[ 1.423450] iep ion client create success!
[ 1.424676] rk_iommu ff900800.iep_mmu: (iep) Enabled
[ 1.424952] rk_iommu ff900800.iep_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x2e26a000
[ 1.424984] IEP Power OFF
[ 1.425144] rk_iommu ff900800.iep_mmu: (iep) Disabled
[ 1.425402] rk_iommu ff900800.iep_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e26a000
[ 1.425842] IEP Driver loaded succesfully
[ 1.426299] Module initialized.
[ 1.428779] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[ 1.429139] dma-pl330 ffb20000.pdma: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[ 1.433830] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[ 1.434283] dma-pl330 ff250000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 1.435397] pwm-voltage-regulator pwm_regulator.23: unable to request PWM, trying legacy API
[ 1.435803] pwm-voltage-regulator pwm_regulator.23: unable to request legacy PWM
[ 1.436141] pwm_regulator_probe:error
[ 1.436371] platform pwm_regulator.23: Driver pwm-voltage-regulator requests probe deferral
[ 1.437803] rk_serial.c v1.8 2014-03-04
[ 1.438599] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[ 1.439558] serial ff180000.serial: membase 0xf0172000
[ 1.449527] loop: module loaded
[ 1.450288] [rk1000_probe] start
[ 1.450616] act_ldo3: operation not allowed
[ 1.451202] rk1000_probe: turn on ldo3 done.
[ 1.451542] act_ldo4: operation not allowed
[ 1.452098] rk1000_probe: turn on ldo done.
[ 1.452412] act_ldo2: operation not allowed
[ 1.452958] rk1000_probe: turn on ldo2 done.
[ 1.453269] act_ldo8: operation not allowed
[ 1.453807] rk1000_probe: turn on ldo done.
[ 1.454097] of_get_named_gpio_flags exited with status 245
[ 1.473645] of_get_named_gpio_flags: can't parse gpios property
[ 1.690176] rk1000 get i2s clk success!
[ 1.690455] rk1000 enable i2s clk
[ 1.690726] rk1000 enable i2s mclk
[ 1.692571] rk1000 probe ok
[ 1.693961] SCSI Media Changer driver v0.25
[ 1.695208] tun: Universal TUN/TAP device driver, 1.6
[ 1.705391] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 1.717172] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[ 1.727498] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
[ 1.737808] stmmac_probe_config_dt: clock input or output? (input).
[ 1.748099] stmmac_probe_config_dt: TX delay(0x30).
[ 1.758345] stmmac_probe_config_dt: RX delay(0x20).
[ 1.768547] of_get_named_gpio_flags exited with status 136
[ 1.768583] of_get_named_gpio_flags: can't parse gpios property
[ 1.768619] stmmac_probe_config_dt: is rockchip,rk3288-gmac
[ 1.768923] stmmc_pltfr_init:
[ 1.788766] stmmc_pltfr_init: ERROR: Get power-gpio failed.
[ 1.798881] _gpio_request: gpio-136 (gmac_phy_reset) status -16
[ 1.798914] stmmc_pltfr_init: ERROR: Request gmac phy reset pin failed.
[ 1.809113] stmmc_pltfr_init: init for RGMII
[ 1.819288] tx delay=0x30
rx delay=0x20
[ 1.840744] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 1.850895] Normal descriptors
[ 1.860951] Ring mode enabled
[ 1.870944] DMA HW capability register supported
[ 1.871180] RX Checksum Offload Engine supported (type 2)
[ 1.891177] TX Checksum insertion supported
[ 1.901223] Wake-Up On Lan supported
[ 1.911421] Enable RX Mitigation via HW Watchdog Timer
[ 1.922772] PPP generic driver version 2.4.2
[ 1.933239] PPP BSD Compression module registered
[ 1.943410] PPP Deflate Compression module registered
[ 1.953467] PPP MPPE Compression module registered
[ 1.963346] NET: Registered protocol family 24
[ 1.973276] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 1.983571] CSLIP: code copyright 1989 Regents of the University of California.
[ 1.993966] Rockchip WiFi SYS interface (V1.00) ...
[ 2.004532] usbcore: registered new interface driver catc
[ 2.014988] usbcore: registered new interface driver kaweth
[ 2.025229] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 2.035755] usbcore: registered new interface driver pegasus
[ 2.046328] usbcore: registered new interface driver rtl8150
[ 2.056805] usbcore: registered new interface driver r8152
[ 2.067075] hso: drivers/net/usb/hso.c: Option Wireless
[ 2.077539] usbcore: registered new interface driver hso
[ 2.087891] usbcore: registered new interface driver asix
[ 2.097966] usbcore: registered new interface driver ax88179_178a
[ 2.108017] usbcore: registered new interface driver cdc_ether
[ 2.117921] usbcore: registered new interface driver cdc_eem
[ 2.127679] usbcore: registered new interface driver dm9601
[ 2.137301] usbcore: registered new interface driver dm9620
[ 2.146797] usbcore: registered new interface driver smsc75xx
[ 2.156116] usbcore: registered new interface driver smsc95xx
[ 2.165342] usbcore: registered new interface driver gl620a
[ 2.174394] usbcore: registered new interface driver net1080
[ 2.183256] usbcore: registered new interface driver plusb
[ 2.191901] usbcore: registered new interface driver rndis_host
[ 2.200357] usbcore: registered new interface driver cdc_subset
[ 2.208701] usbcore: registered new interface driver zaurus
[ 2.216946] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 2.225312] usbcore: registered new interface driver int51x1
[ 2.233555] usbcore: registered new interface driver kalmia
[ 2.241728] usbcore: registered new interface driver ipheth
[ 2.249793] usbcore: registered new interface driver sierra_net
[ 2.257853] usbcore: registered new interface driver cx82310_eth
[ 2.265977] usbcore: registered new interface driver cdc_ncm
[ 2.273934] usbcore: registered new interface driver qmi_wwan
[ 2.281863] usbcore: registered new interface driver cdc_mbim
[ 2.289540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.300546] ehci_rk_probe f1a00000 f1a00010
[ 2.308357] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
[ 2.316664] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[ 2.325978] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[ 2.349397] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
[ 2.349611] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.349648] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.349678] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
[ 2.349706] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[ 2.349732] usb usb1: SerialNumber: ff500000.usb
[ 2.351091] hub 1-0:1.0: USB hub found
[ 2.351162] hub 1-0:1.0: 1 port detected
[ 2.378906] ehci_rk_probe ok
[ 2.379327] usbcore: registered new interface driver cdc_acm
[ 2.379351] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.379508] usbcore: registered new interface driver usblp
[ 2.379629] usbcore: registered new interface driver cdc_wdm
[ 2.379833] usbcore: registered new interface driver usb-storage
[ 2.379957] usbcore: registered new interface driver ums-alauda
[ 2.380067] usbcore: registered new interface driver ums-cypress
[ 2.380174] usbcore: registered new interface driver ums-datafab
[ 2.380276] usbcore: registered new interface driver ums_eneub6250
[ 2.380379] usbcore: registered new interface driver ums-freecom
[ 2.380485] usbcore: registered new interface driver ums-isd200
[ 2.380588] usbcore: registered new interface driver ums-jumpshot
[ 2.380691] usbcore: registered new interface driver ums-karma
[ 2.380797] usbcore: registered new interface driver ums-onetouch
[ 2.380905] usbcore: registered new interface driver ums-sddr09
[ 2.381034] usbcore: registered new interface driver ums-sddr55
[ 2.381145] usbcore: registered new interface driver ums-usbat
[ 2.381267] usbcore: registered new interface driver trancevibrator
[ 2.381287] usb20_otg: version 3.10a 21-DEC-2012
[ 2.382325] f1a80040
[ 2.382351] Core Release: 3.10a
[ 2.382372] Setting default values for core params
[ 2.382785] Using Buffer DMA mode
[ 2.382808] Periodic Transfer Interrupt Enhancement - disabled
[ 2.382827] Multiprocessor Interrupt Enhancement - disabled
[ 2.382847] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.382864] ^^^^^^^^^^^^^^^^^Device Mode
[ 2.382890] Dedicated Tx FIFOs mode
[ 2.382930] pcd_init otg_dev = eda21640
[ 2.383393] usb20_otg ff580000.usb: DWC OTG Controller
[ 2.383465] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[ 2.383546] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[ 2.383707] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.383741] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.383770] usb usb2: Product: DWC OTG Controller
[ 2.383797] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[ 2.383823] usb usb2: SerialNumber: ff580000.usb
[ 2.385092] hub 2-0:1.0: USB hub found
[ 2.385147] hub 2-0:1.0: 1 port detected
[ 2.386046] usb20_host: version 3.10a 21-DEC-2012
[ 2.389494] f1b00040
[ 2.389521] Core Release: 3.10a
[ 2.389543] Setting default values for core params
[ 2.389923] Using Buffer DMA mode
[ 2.389945] Periodic Transfer Interrupt Enhancement - disabled
[ 2.389962] Multiprocessor Interrupt Enhancement - disabled
[ 2.389983] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.389999] ^^^^^^^^^^^^^^^^^^Host Mode
[ 2.390076] usb20_host ff540000.usb: DWC OTG Controller
[ 2.390146] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
[ 2.390225] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[ 2.390368] Init: Power Port (0)
[ 2.390548] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.390583] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.390611] usb usb3: Product: DWC OTG Controller
[ 2.390638] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[ 2.390665] usb usb3: SerialNumber: ff540000.usb
[ 2.391945] hub 3-0:1.0: USB hub found
[ 2.392000] hub 3-0:1.0: 1 port detected
[ 2.393679] .. rk pwm remotectl v1.0 init
[ 2.393869] of_get_named_gpio_flags exited with status 10
[ 2.393890] init ir_emission_gpio:10
[ 2.393996] remotectl probe j=0x0
[ 2.394449] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
[ 2.395023] pwm enable val=0x646205
[ 2.395826] usbcore: registered new interface driver xpad
[ 2.395964] usbcore: registered new interface driver usb_acecad
[ 2.396086] usbcore: registered new interface driver aiptek
[ 2.396211] usbcore: registered new interface driver gtco
[ 2.396349] usbcore: registered new interface driver hanwang
[ 2.396475] usbcore: registered new interface driver kbtab
[ 2.396618] usbcore: registered new interface driver wacom
[ 2.397798] sensor_register_slave:mma8452,id=17
[ 2.397824] sensor_register_slave:cm3217,id=44
[ 2.397845] sensor_register_slave:cm3218,id=45
[ 2.397862] tchip_rm_init is here!
[ 2.399474] input: tchip_remote_key as /devices/virtual/input/input1
[ 2.399867] tchiprm_register_device is here!
[ 2.400285] input: tchip_remote_touch as /devices/virtual/input/input2
[ 2.400649] tchip_remote_abs_register_device is here!
[ 2.401020] input: tchip_remote_gsensor as /devices/virtual/input/input3
[ 2.401407] tchip_remote_gsensor_register_device is here!
[ 2.405451] of_get_named_gpio_flags exited with status 4
[ 2.408508] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[ 2.408643] i2c /dev entries driver
[ 2.410894] IR NEC protocol handler initialized
[ 2.410917] IR RC5(x) protocol handler initialized
[ 2.410936] IR RC6 protocol handler initialized
[ 2.410953] IR JVC protocol handler initialized
[ 2.410970] IR Sony protocol handler initialized
[ 2.410987] IR RC5 (streamzap) protocol handler initialized
[ 2.411005] IR SANYO protocol handler initialized
[ 2.411024] IR MCE Keyboard/mouse protocol handler initialized
[ 2.411273] usbcore: registered new interface driver uvcvideo
[ 2.411292] USB Video Class driver (1.1.1)
[ 2.413993] device-mapper: uevent: version 1.0.3
[ 2.414699] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
[ 2.415650] Bluetooth: HCI UART driver ver 2.2
[ 2.415679] Bluetooth: HCI H4 protocol initialized
[ 2.415700] Bluetooth: HCILL protocol initialized
[ 2.421739] cpufreq version 1.0, suspend freq 1200 MHz
[ 2.422320] cpuidle: using governor ladder
[ 2.422345] cpuidle: using governor menu
[ 2.422450] Synopsys Designware Multimedia Card Interface Driver
[ 2.423192] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[ 2.440453] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
[ 2.441010] 3291..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
[ 2.441034] mmc0 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[ 2.441100] of_get_named_gpio_flags: can't parse gpios property
[ 2.441383] 1381..dw_mci_set_ios: no card. [mmc0]
[ 2.457709] 1381..dw_mci_set_ios: no card. [mmc0]
[ 2.477658] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[ 2.477705] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[ 2.478689] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[ 2.479134] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[ 2.483386] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[ 2.483620] 3285..dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
[ 2.483630] mmc1 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[ 2.483655] of_get_named_gpio_flags: can't parse gpios property
[ 2.484154] 1381..dw_mci_set_ios: no card. [mmc1]
[ 2.496973] 1381..dw_mci_set_ios: no card. [mmc1]
[ 2.509492] mmc0: BKOPS_EN bit is not set
[ 2.511405] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
[ 2.513705] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[ 2.513726] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[ 2.516787] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[ 2.516798] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
[ 2.517191] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[ 2.520238] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[ 2.520390] 3291..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[ 2.520396] mmc2 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[ 2.520411] of_get_named_gpio_flags: can't parse gpios property
[ 2.520499] 1381..dw_mci_set_ios: no card. [mmc2]
[ 2.524435] dwmmc_rockchip ff0f0000.rksdmmc: data FIFO error (status=00002000)
[ 2.529389] rk_sdmmc: BOOT
execute tuning: candidates_degree = SDMMC_SHIFT_DEGREE_0 SDMMC_SHIFT_DEGREE_90 SDMMC_SHIFT_DEGREE_INVALID SDMMC_SHIFT_DEGREE_INVALID[mmc0]
[ 2.529486] mmc0: new HS200 MMC card at address 0001
[ 2.529784] mmcblk0: mmc0:0001 AWMB3R 14.5 GiB
[ 2.530130] resource: 0x000400000 -- 0x001400000 (16 MB)
[ 2.530137] boot: 0x001400000 -- 0x002400000 (16 MB)
[ 2.530144] linuxroot: 0x002400000 -- 0x3a3a00000 (14870 MB)
[ 2.530649] mmcblk0: p1 p2 p3rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]
[ 2.536301] 1381..dw_mci_set_ios: no card. [mmc2]
[ 2.556189] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[ 2.556199] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[ 2.556492] leds-gpio fff16100.leds: pins are not configured from the driver
[ 2.556510] of_get_named_gpio_flags exited with status 259
[ 2.556518] of_get_named_gpio_flags exited with status 259
[ 2.556575] mmc1: Skipping voltage switch
[ 2.556638] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.556697] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.558242] usbcore: registered new interface driver usbhid
[ 2.558248] usbhid: USB HID core driver
[ 2.558589] ashmem: initialized
[ 2.558708] logger: created 256K log 'log_main'
[ 2.558807] logger: created 256K log 'log_events'
[ 2.558904] logger: created 256K log 'log_radio'
[ 2.559009] logger: created 256K log 'log_system'
[ 2.559888] of_get_named_gpio_flags exited with status 5
[ 2.559896] of_get_named_gpio_flags exited with status 5
[ 2.560168] input: rk29-keypad as /devices/ff100000.adc/key.31/input/input4
[ 2.560959] of_get_named_gpio_flags exited with status 229
[ 2.561200] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
[ 2.561227] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[ 2.561244] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
[ 2.561347] u32 classifier
[ 2.561352] Actions configured
[ 2.561363] Netfilter messages via NETLINK v0.30.
[ 2.561441] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.561844] ctnetlink v0.93: registering with nfnetlink.
[ 2.561938] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 2.561944] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 2.562283] xt_time: kernel timezone is -0000
[ 2.562522] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.562678] arp_tables: (C) 2002 David S. Miller
[ 2.562723] TCP: cubic registered
[ 2.562730] Initializing XFRM netlink socket
[ 2.562999] NET: Registered protocol family 10
[ 2.563627] mip6: Mobile IPv6
[ 2.563661] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.563807] sit: IPv6 over IPv4 tunneling driver
[ 2.564206] NET: Registered protocol family 17
[ 2.564232] NET: Registered protocol family 15
[ 2.564295] Bridge firewalling registered
[ 2.564304] Ebtables v2.0 registered
[ 2.564495] Bluetooth: RFCOMM TTY layer initialized
[ 2.564524] Bluetooth: RFCOMM socket layer initialized
[ 2.564529] Bluetooth: RFCOMM ver 1.11
[ 2.564535] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.564539] Bluetooth: BNEP filters: protocol multicast
[ 2.564551] Bluetooth: BNEP socket layer initialized
[ 2.564556] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.564566] Bluetooth: HIDP socket layer initialized
[ 2.564636] l2tp_core: L2TP core driver, V2.0
[ 2.564652] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 2.564658] 8021q: 802.1Q VLAN Support v1.8
[ 2.564678] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 2.564871] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 2.564881] wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[ 2.564887] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 2.564894] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[ 2.564899] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 2.564914] of_get_named_gpio_flags exited with status 156
[ 2.564919] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[ 2.564925] of_get_named_gpio_flags: can't parse gpios property
[ 2.564931] of_get_named_gpio_flags exited with status 158
[ 2.564937] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[ 2.564942] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 2.564969] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
[ 2.565021] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 2.565071] [BT_RFKILL]: Enter rfkill_rk_init
[ 2.565218] of_get_named_gpio_flags exited with status 147
[ 2.565224] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
[ 2.565232] of_get_named_gpio_flags exited with status 155
[ 2.565238] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
[ 2.565244] of_get_named_gpio_flags exited with status 157
[ 2.565249] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
[ 2.565255] of_get_named_gpio_flags exited with status 154
[ 2.565259] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
[ 2.565265] of_get_named_gpio_flags exited with status 159
[ 2.565270] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[ 2.565317] [BT_RFKILL]: Request irq for bt wakeup host
[ 2.565427] [BT_RFKILL]: ** disable irq
[ 2.565524] [BT_RFKILL]: ap6335 device registered.
[ 2.565589] Key type dns_resolver registered
[ 2.566476] input: hdmi_cec_key as /devices/virtual/input/input5
[ 2.584509] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 2.584528] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc1]
[ 2.584596] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc1]
[ 2.584608] mmc1: new high speed SDHC card at address 0007
[ 2.584927] mmcblk1: mmc1:0007 SL32G 28.9 GiB
[ 2.592357] mmcblk1: p1
[ 2.592742] 1381..dw_mci_set_ios: no card. [mmc2]
[ 2.723308] Using Buffer DMA mode
[ 2.723314] Periodic Transfer Interrupt Enhancement - disabled
[ 2.723317] Multiprocessor Interrupt Enhancement - disabled
[ 2.723322] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.723325] ^^^^^^^^^^^^^^^^^^Host Mode
[ 2.772470] Init: Power Port (0)
[ 3.195573] ******** Show Sink Info ********
[ 3.197363] Max tmds clk is 0
[ 3.199119] Support video mode:
[ 3.200866] 1920x1080p@60Hz
[ 3.202609] 1920x1080p@50Hz
[ 3.204327] 1280x720p@60Hz
[ 3.206041] 1280x720p@50Hz
[ 3.207701] 720x576p@50Hz
[ 3.209327] 720x480p@60Hz
[ 3.210952] Support video color mode:
[ 3.212550] RGB
[ 3.214152] YCbCr422
[ 3.215748] YCbCr444
[ 3.217330] Support video color depth:
[ 3.218899] 24bit
[ 3.220456] Support audio type:
[ 3.222000] LPCM
[ 3.223531] Support max audio channel is 2
[ 3.225082] Support audio sample rate:
[ 3.226632] 32000
[ 3.228161] 44100
[ 3.229681] 48000
[ 3.231190] Support audio word lenght:
[ 3.232704] 16bit
[ 3.234211] 20bit
[ 3.235702] 24bit

[ 3.238633] ******** Show Sink Info ********
[ 3.418267]
rk_fb_switch_screen lcdc_id 0 type 6 enable 1
[ 3.421199] fb0 win id 1 state 1
[ 3.422711] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
[ 3.424234] fb1 win id 0 state 0
[ 3.425774] fb2 win id 2 state 0
[ 3.427287] fb3 win id 3 state 0
[ 3.428763] fb4 win id 4 state 0
[ 3.430234]
rk_fb_switch_screen lcdc_id 0 type 6 enable 1 done

[ 3.434591] pixel clk is 148500000 tmds clk is 148500000
[ 3.436088] rk3288-hdmi ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
[ 3.446725] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
[ 3.448868] dgl rk1000 standby
[ 3.465949] rk1000_codec_probe ret=0x0
[ 3.467610] dgl rk1000 standby
[ 3.469869] rk1000_codec 4-0060: ASoC: no sink widget found for Mic Bias1
[ 3.471479] rk1000_codec 4-0060: ASoC: Failed to add route Mic Jack -> direct -> Mic Bias1
[ 3.473130] rk1000_codec 4-0060: ASoC: no source widget found for Mic Bias1
[ 3.474813] rk1000_codec 4-0060: ASoC: Failed to add route Mic Bias1 -> direct -> MIC1
[ 3.476478] rk1000_codec 4-0060: ASoC: no source widget found for HPOL
[ 3.478156] rk1000_codec 4-0060: ASoC: Failed to add route HPOL -> direct -> Headphone Jack
[ 3.479889] rk1000_codec 4-0060: ASoC: no source widget found for HPOR
[ 3.481621] rk1000_codec 4-0060: ASoC: Failed to add route HPOR -> direct -> Headphone Jack
[ 3.483348] rk1000_codec 4-0060: ASoC: no source widget found for SPOL
[ 3.485016] rk1000_codec 4-0060: ASoC: Failed to add route SPOL -> direct -> Ext Spk
[ 3.486681] rk1000_codec 4-0060: ASoC: no source widget found for SPOR
[ 3.488209] rk1000_codec 4-0060: ASoC: Failed to add route SPOR -> direct -> Ext Spk
[ 3.489843] rk1000_codec 4-0060: ASoC: DAPM unknown pin HP_L
[ 3.491474] rk1000_codec 4-0060: ASoC: DAPM unknown pin HP_R
[ 3.496576] rockchip-rk1000 rockchip-rk1000.28: rk1000_codec <-> rockchip-i2s.0 mapping ok
[ 3.498926] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[ 3.500637] rk3288_init_suspend
[ 3.502257] rk3288_suspend_init enter
[ 3.504002] rk3288_suspend_init: pm_ctrbits =40017
[ 3.505578] gpio_get_dts_info suspend:8
[ 3.507224] gpio_get_dts_info resume:8
[ 3.508832] rockchip,pmic-suspend_gpios:1007c30 1007c40 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[ 3.510542] rockchip,pmic-resume_gpios:2007c32 2007c42 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[ 3.512380] clks_gating_suspend_init:clkgt info ok
[ 3.514112] Registering SWP/SWPB emulation handler
[ 3.516084] ddrfreq: verion 1.2 20140526
[ 3.517945] ddrfreq: normal 696MHz video_1080p 0MHz video_4k 696MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 696MHz
[ 3.517949] ddrfreq: change freq to 696 MHz when normal
[ 3.519208] ddrfreq: auto-freq=0
[ 3.520473] ddrfreq: auto-freq-table[0] 240MHz
[ 3.521736] ddrfreq: auto-freq-table[1] 324MHz
[ 3.522998] ddrfreq: auto-freq-table[2] 456MHz
[ 3.524254] ddrfreq: auto-freq-table[3] 528MHz
[ 3.525877] of_get_named_gpio_flags: can't parse gpios property
[ 3.525885] video src is lcdc0, prop is 0
[ 3.527147]
rk_fb_switch_screen lcdc_id 0 type 1 enable 2
[ 3.530038] rk1000 tvencoder ver 2.0 probe ok
[ 3.531355] regulator-dummy: disabling
[ 3.532869] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
[ 3.534219] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[ 3.535562] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
[ 3.536998] pcd_pullup, is_on 0
[ 3.538371] WARN::dwc_otg_handle_mode_mismatch_intr:69: Mode Mismatch Interrupt: currently in Host mode

[ 3.538390] file system registered
[ 3.543126] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 3.544590] android_usb gadget: Number of LUNs=2
[ 3.546054] lun0: LUN: removable file: (no medium)
[ 3.547529] lun1: LUN: removable file: (no medium)
[ 3.549118] android_usb gadget: android_usb ready
[ 3.550690] sensor_init: Probe name sensors
[ 3.552176] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
[ 3.554196] rtc_hym8563 0-0051: setting system clock to 2016-02-12 15:33:55 UTC (1455291235)
[ 3.560805] usbcore: registered new interface driver snd-usb-audio
[ 3.562365] ALSA device list:
[ 3.563313] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
[ 3.565632] #0: RK_RK1000
[ 3.567210] #1: RK-HDMI-SPDIF
[ 3.569005] Freeing unused kernel memory: 352K (c0b41000 - c0b99000)
[ 3.596648] udevd[147]: starting version 175
[ 3.794880] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.173914] systemd[1]: Failed to insert module 'autofs4'
[ 4.198906] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 4.200973] systemd[1]: Detected architecture arm.
[ 4.218970] systemd[1]: Set hostname to <Ugoos_box>.
[ 4.366501] dwc_otg_hcd_enable, enable host controller
[ 4.480655] Using Buffer DMA mode
[ 4.482568] Periodic Transfer Interrupt Enhancement - disabled
[ 4.484460] Multiprocessor Interrupt Enhancement - disabled
[ 4.486357] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 4.488222] ^^^^^^^^^^^^^^^^^^Host Mode
[ 4.515256] systemd[1]: Reached target Swap.
[ 4.517119] systemd[1]: Starting Swap.
[ 4.518992] systemd[1]: Starting of Arbitrary Executable File Formats File System Automount Point not supported.
[ 4.520964] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.522861] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.526912] systemd[1]: Created slice Root Slice.
[ 4.528850] systemd[1]: Starting Root Slice.
[ 4.532890] systemd[1]: Listening on udev Kernel Socket.
[ 4.534865] systemd[1]: Starting udev Kernel Socket.
[ 4.538923] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.540861] systemd[1]: Starting Journal Socket (/dev/log).
[ 4.542886] systemd[1]: Listening on Journal Audit Socket.
[ 4.543699] Init: Power Port (0)
[ 4.548784] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.550707] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.554691] systemd[1]: Listening on udev Control Socket.
[ 4.556586] systemd[1]: Starting udev Control Socket.
[ 4.560605] systemd[1]: Created slice User and Session Slice.
[ 4.562530] systemd[1]: Starting User and Session Slice.
[ 4.566502] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.568394] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.572331] systemd[1]: Listening on Journal Socket.
[ 4.574204] systemd[1]: Starting Journal Socket.
[ 4.578114] systemd[1]: Created slice System Slice.
[ 4.579966] systemd[1]: Starting System Slice.
[ 4.582798] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.587618] systemd[1]: Mounting Debug File System...
[ 4.607019] systemd[1]: Starting Load Kernel Modules...
[ 4.611129] systemd[1]: Mounted Huge Pages File System.
[ 4.619704] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.622452] systemd[1]: Starting Nameserver information manager...
[ 4.628420] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 4.630201] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 4.634913] systemd[1]: Started Read required files in advance.
[ 4.636977] systemd[1]: Starting Read required files in advance...
[ 4.642846] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.644597] systemd[1]: Starting Remote File Systems (Pre).
[ 4.648158] systemd[1]: Reached target Encrypted Volumes.
[ 4.649805] systemd[1]: Starting Encrypted Volumes.
[ 4.653409] systemd[1]: Created slice system-getty.slice.
[ 4.655239] systemd[1]: Starting system-getty.slice.
[ 4.655753] mali ffa30000.gpu: Continuing without Mali clock control
[ 4.655798] mali pd enabled
[ 4.655804] clk enabled
[ 4.655811] MALI_DVFS_STEP=4,div_dvfs=10
[ 4.655814] mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
[ 4.655818] mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80
[ 4.655822] mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90
[ 4.655825] mali_dvfs_infotbl[3].clock=480000,min_threshold=94,max_threshold=100
[ 4.655912] turn on mali power
[ 4.655928] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
[ 4.656222] mali ffa30000.gpu: Probed as mali0
[ 4.675977] systemd[1]: Starting Increase datagram queue length...
[ 4.680312] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.685521] systemd[1]: Reached target Slices.
[ 4.687169] systemd[1]: Starting Slices.
[ 4.688872] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.691689] systemd[1]: Starting udev Coldplug all Devices...
[ 4.696253] systemd[1]: Starting Setup Virtual Console...
[ 4.702716] systemd[1]: Mounted Debug File System.
[ 4.706509] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 4.708665] systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
[ 4.714551] systemd[1]: Failed to start Load Kernel Modules.
[ 4.716287] systemd[1]: Unit systemd-modules-load.service entered failed state.
[ 4.718049] systemd[1]: systemd-modules-load.service failed.
[ 4.721191] systemd[1]: ureadahead.service: main process exited, code=exited, status=5/NOTINSSTALLED
[ 4.723778] systemd[1]: Unit ureadahead.service entered failed state.
[ 4.725594] systemd[1]: ureadahead.service failed.
[ 4.729600] systemd[1]: Started Increase datagram queue length.
[ 4.733935] systemd[1]: Started Remount Root and Kernel File Systems.
[ 4.739450] systemd[1]: Started Setup Virtual Console.
[ 4.744501] systemd[1]: Started Nameserver information manager.
[ 4.763356] systemd[1]: Started udev Coldplug all Devices.
[ 4.819954] systemd[1]: Started Rebuild Hardware Database.
[ 4.821720] systemd[1]: Started Various fixups to make systemd work better on Debian.
[ 4.824356] systemd[1]: Starting Load/Save Random Seed...
[ 4.830032] systemd[1]: Listening on Syslog Socket.
[ 4.831827] systemd[1]: Starting Syslog Socket.
[ 4.834454] systemd[1]: Starting Journal Service...
[ 4.839024] systemd[1]: Starting Apply Kernel Variables...
[ 4.843479] systemd[1]: Mounting FUSE Control File System...
[ 4.848373] systemd[1]: Mounting Configuration File System...
[ 4.853343] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 4.859911] systemd[1]: Mounted Configuration File System.
[ 4.863589] systemd[1]: Mounted FUSE Control File System.
[ 4.867716] systemd[1]: Started Load/Save Random Seed.
[ 4.904802] systemd-journald[336]: Failed to join audit multicast group. The kernel is probably too old or multicast reading is not supported. Ignoring: Operation not permitted
[ 4.907742] Indeed it is in host mode hprt0 = 00021501
[ 4.908941] systemd[1]: Started Apply Kernel Variables.
[ 4.924602] systemd[1]: Started Create Static Device Nodes in /dev.
[ 4.926815] systemd[1]: Reached target Local File Systems (Pre).
[ 4.926847] systemd[1]: Starting Local File Systems (Pre).
[ 4.928850] systemd[1]: Reached target Local File Systems.
[ 4.928882] systemd[1]: Starting Local File Systems.
[ 4.930831] systemd[1]: Reached target Remote File Systems.
[ 4.930859] systemd[1]: Starting Remote File Systems.
[ 4.931715] systemd[1]: Starting Set console keymap...
[ 4.934601] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[ 4.937767] systemd[1]: Starting Wait for all "auto" /etc/network/interfaces to be up for network-online.target...
[ 4.941808] systemd[1]: Started Commit a transient machine-id on disk.
[ 4.942595] systemd[1]: Starting LSB: Raise network interfaces....
[ 4.946559] systemd[1]: Starting udev Kernel Device Manager...
[ 4.979606] systemd[1]: Started Journal Service.
[ 5.025976] systemd-journald[336]: Received request to flush runtime journal from PID 1
[ 5.084845] usb 3-1: new high-speed USB device number 2 using usb20_host
[ 5.084916] Indeed it is in host mode hprt0 = 00001101
[ 5.282121] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
[ 5.282136] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.282144] usb 3-1: Product: USB 2.0 Hub [MTT]
[ 5.282551] hub 3-1:1.0: USB hub found
[ 5.282618] hub 3-1:1.0: 4 ports detected
[ 5.444210] wifi_power_write: poweren = 1
[ 5.444222] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 5.444229] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[ 5.444235] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 5.547316] [WLAN_RFKILL]: wifi turn on power. 156
[ 5.557343] usb 3-1.2: new full-speed USB device number 3 using usb20_host
[ 5.660612] usb 3-1.2: New USB device found, idVendor=046d, idProduct=c52b
[ 5.660637] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.660654] usb 3-1.2: Product: USB Receiver
[ 5.660668] usb 3-1.2: Manufacturer: Logitech
[ 5.673843] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-ff540000.usb-1.2/input2
[ 5.677551] input: Logitech Unifying Device. Wireless PID:4024 as /devices/ff540000.usb/usb3/3-1/3-1.2/3-1.2:1.2/0003:046D:C52B.0003/input/input6
[ 5.677809] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-ff540000.usb-1.2:1
[ 5.678728] input: Logitech Unifying Device. Wireless PID:4009 as /devices/ff540000.usb/usb3/3-1/3-1.2/3-1.2:1.2/0003:046D:C52B.0003/input/input7
[ 5.679582] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4009] on usb-ff540000.usb-1.2:2
[ 6.983999] [BT_RFKILL]: ENABLE UART_RTS
[ 7.092364] [BT_RFKILL]: DISABLE UART_RTS
[ 7.092458] [BT_RFKILL]: bt turn on power
[ 7.461567] phy_power_on: enable = 1
[ 7.507497] Read the Ethernet MAC address from IDB:6f:93:1c:28:27:45
[ 7.507535] eth0: device MAC address 06:b2:ee:79:e6:a3
[ 7.516449] libphy: stmmac: probed
[ 7.516462] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
[ 7.516470] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01) active
[ 7.524032] ================================================== =====
[ 7.524042] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 7.524048] ================================================== =====
[ 7.524054] WiFi driver (Powered by Rockchip,Ver 4.80.WFD.OOB) init.
[ 7.524079] ======== PULL WL_REG_ON HIGH! ========
[ 7.524085] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 7.524092] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[ 7.524098] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 7.528638] phy_power_on: enable = 0
[ 7.529499] phy_power_on: enable = 1
[ 7.563974] eth0: device MAC address 06:b2:ee:79:e6:a3
[ 7.575954] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.617107] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.623562] [WLAN_RFKILL]: wifi turn on power. 156
[ 7.623570] mmc2:mmc host rescan start!
[ 7.623578] =========== WLAN placed in POWER ON ========
[ 7.623582] bcmsdh_register: Linux Kernel SDIO/MMC Driver
[ 7.623625]
Dongle Host Driver, version 1.88.45.3 (r420671)
Compiled in drivers/net/wireless/bcmdhd on Jul 30 2015 at 15:21:41
[ 7.664066] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
[ 7.664284] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
[ 7.840085] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2]
[ 7.875322] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 7.876906] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 7.878533] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 7.881492] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 7.937368] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 7.937401] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[ 7.937491] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc2]
[ 7.944025] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[ 7.944078] mmc2: new high speed SDIO card at address 0001
[ 7.944770] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ 7.944857] alloc static buf at edbc0000!
[ 7.945331] FW_PATH = /system/etc/firmware/fw_bcm4339a0_ag.bin
NVRAM_PATH = /system/etc/firmware/nvram_AP6335.txt
[ 7.951632] F1 signature OK, socitype:0x1 chip:0x4339 rev:0x1 pkg:0x2
[ 7.952537] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[ 7.953387] wl_create_event_handler(): thread:wl_event_handler:2ae started
[ 7.953399] tsk Enter, tsk = 0xc58da664
[ 7.953846] dhd_attach(): thread:dhd_watchdog_thread:2af started
[ 7.953965] dhd_attach(): thread:dhd_dpc:2b0 started
[ 7.954078] dhd_attach(): thread:dhd_sysioc:2b1 started
[ 7.955124] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 63:75:72:5f:65:74
[ 7.955761] ======== PULL WL_REG_ON LOW! (flag = 2) ========
[ 7.955799] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 8.056534] [WLAN_RFKILL]: wifi shut off power.
[ 8.056550] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
[ 8.056560] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 8.056569] =========== WLAN placed in RESET ========
[ 8.177485]
Dongle Host Driver, version 1.88.45.3 (r420671)
Compiled in drivers/net/wireless/bcmdhd on Jul 30 2015 at 15:21:41
[ 8.177517] wl_android_wifi_on in 1
[ 8.177528] wl_android_wifi_on in 2: g_wifi_on=0
[ 8.177540] ======== PULL WL_REG_ON HIGH! (flag = 2) ========
[ 8.177552] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 8.177563] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[ 8.177575] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 8.282878] [WLAN_RFKILL]: wifi turn on power. 156
[ 8.282895] =========== WLAN going back to live ========
[ 8.282907] sdio_reset_comm():
[ 8.285936] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
[ 8.285956] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]
[ 8.309710] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 8.312786] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 8.315845] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 8.321343] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 8.371491] spk_ctrl_fun:: spk status = 1
[ 8.439699] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 8.439839] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[ 8.442212]

dhd_bus_devreset: == WLAN ON ==
[ 8.442360] dhd_bus_devreset called when dongle is not in reset
[ 8.442417] Will call dhd_bus_start instead
[ 8.442674] dhd_conf_set_fw_name_by_chip: firmware_path=/system/etc/firmware/fw_bcm4339a0_ag.bin
[ 11.301180] Final fw_path=/system/etc/firmware/fw_bcm4339a0_ag.bin
[ 11.301229] Final nv_path=/system/etc/firmware/nvram_AP6335.txt
[ 11.301263] Final conf_path=/system/etc/firmware/config.txt
[ 11.430368] NVRAM version: AP6335_NVRAM_V1.7_04102014
[ 11.430597]
rk_fb_switch_screen lcdc_id 0 type 6 enable 0
[ 11.430712] rk1000_early_suspend
[ 11.430758] rk_iommu ff930300.vopb_mmu: (vopb) Disabled
[ 11.430766] rk_iommu ff930300.vopb_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e26f000
[ 11.432864] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 11.455413] rk3288-lcdc lcdc0: blank mode:1
[ 11.491036] stmmc_pltfr_fix_mac_speed: fix speed to 100
[ 11.491048] stmmc_pltfr_fix_mac_speed: fix speed for RGMII
[ 11.491057] libphy: stmmac-0:01 - Link is Up - 100/Full
[ 11.605386] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 11.605575] bcmsdh_set_drvdata: Enter
[ 11.605584] bcmsdh_register_oob_intr: Enter
[ 11.605590] bcmsdh_register_oob_intr: IRQ=195 Type=414
[ 11.606430] dhd_conf_set_band: Set band 0
[ 11.615953] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=94:a1:a2:1e:a9:5d
[ 11.615963] dhd_conf_set_country: Set country ALL, revision 0
[ 11.616245] dhd_conf_set_country: country code setting failed -2
[ 11.616526] Country code: US (US/0)
[ 11.616732] dhd_conf_set_roam: Set roam_off 1
[ 11.618025] dhd_conf_set_bw: Enable HT40 in 2.4 GHz
[ 11.628335] Firmware version = wl0: Apr 3 2014 12:12:42 version 6.37.32.28.2_ip (r424058)
[ 11.628346] Driver: 1.88.45.3 (r420671)
Firmware: wl0: Apr 3 2014 12:12:42 version 6.37.32.28.2_ip (r424058)
[ 11.631157] wl_android_wifi_on: Success
[ 11.690783] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.692150] wl_android_wifi_off in 1
[ 11.692159] wl_android_wifi_off in 2: g_wifi_on=1
[ 11.692805] bcmsdh_set_irq: Flag = 0
[ 11.692844] ======== PULL WL_REG_ON LOW! (flag = 2) ========
[ 11.692850] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 11.735994] rk_iommu ff930300.vopb_mmu: (vopb) Enabled
[ 11.736003] rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x2e26f000
[ 11.736019] rk3288-lcdc lcdc0: blank mode:0
[ 11.736044] rk1000 tve exit early resume
[ 11.736052]
rk_fb_switch_screen lcdc_id 0 type 1 enable 1
[ 11.736058] fb0 win id 1 state 1
[ 11.736116] rk3288-lcdc lcdc0: lcdc0: dclk:27000000>>fps:60
[ 11.738633] fb1 win id 0 state 0
[ 11.738638] fb2 win id 2 state 0
[ 11.738642] fb3 win id 3 state 0
[ 11.738645] fb4 win id 4 state 0
[ 11.738649]
rk_fb_switch_screen lcdc_id 0 type 1 enable 1 done

[ 11.795736] [WLAN_RFKILL]: wifi shut off power.
[ 11.795751] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
[ 11.795760] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 11.795769] =========== WLAN placed in RESET ========
[ 11.795776] wl_android_wifi_off out
[ 11.796895] wl_android_wifi_on in 1
[ 11.796915] wl_android_wifi_on in 2: g_wifi_on=0
[ 11.796923] ======== PULL WL_REG_ON HIGH! (flag = 2) ========
[ 11.796930] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 11.796939] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[ 11.796946] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 11.903972] [WLAN_RFKILL]: wifi turn on power. 156
[ 11.903999] =========== WLAN going back to live ========
[ 11.904010] sdio_reset_comm():
[ 11.907013] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
[ 11.907034] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]
[ 11.927325] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 12.058188] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 12.058321] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[ 12.074556] dhd_conf_set_fw_name_by_chip: firmware_path=/system/etc/firmware/fw_bcm4339a0_ag.bin
[ 12.075523] Final fw_path=/system/etc/firmware/fw_bcm4339a0_ag.bin
[ 12.075561] Final nv_path=/system/etc/firmware/nvram_AP6335.txt
[ 12.075614] Final conf_path=/system/etc/firmware/config.txt
[ 12.181153] NVRAM version: AP6335_NVRAM_V1.7_04102014
[ 12.354771] bcmsdh_set_drvdata: Enter
[ 12.354779] bcmsdh_set_irq: Flag = 1
[ 12.354928] dhd_conf_set_band: Set band 0
[ 12.364750] dhd_conf_set_country: Set country ALL, revision 0
[ 12.365026] dhd_conf_set_country: country code setting failed -2
[ 12.365300] Country code: US (US/0)
[ 12.365487] dhd_conf_set_roam: Set roam_off 1
[ 12.366445] ******** Show Sink Info ********
[ 12.366458] Max tmds clk is 0
[ 12.366463] Support video mode:
[ 12.366468] 1920x1080p@60Hz
[ 12.366471] 1920x1080p@50Hz
[ 12.366475] 1280x720p@60Hz
[ 12.366479] 1280x720p@50Hz
[ 12.366483] 720x576p@50Hz
[ 12.366486] 720x480p@60Hz
[ 12.366490] Support video color mode:
[ 12.366494] RGB
[ 12.366500] YCbCr422
[ 12.366503] YCbCr444
[ 12.366507] Support video color depth:
[ 12.366511] 24bit
[ 12.366515] Support audio type:
[ 12.366519] LPCM
[ 12.366523] Support max audio channel is 2
[ 12.366527] Support audio sample rate:
[ 12.366530] 32000
[ 12.366534] 44100
[ 12.366537] 48000
[ 12.366541] Support audio word lenght:
[ 12.366545] 16bit
[ 12.366549] 20bit
[ 12.366553] 24bit

[ 12.366560] ******** Show Sink Info ********
[ 12.366790] dhd_conf_set_bw: Enable HT40 in 2.4 GHz
[ 12.376874] Driver: 1.88.45.3 (r420671)
Firmware: wl0: Apr 3 2014 12:12:42 version 6.37.32.28.2_ip (r424058)
[ 12.376887] wl_android_wifi_on: Success
[ 17.546633] dma-pl330 ffb20000.pdma: fill_queue:2441 Bad Desc(2)
[ 17.546664] dma-pl330 ffb20000.pdma: fill_queue:2441 Bad Desc(3)
[ 17.546676] dma-pl330 ffb20000.pdma: fill_queue:2441 Bad Desc(4)
[ 17.594907] dma-pl330 ffb20000.pdma: fill_queue:2441 Bad Desc(2)
[ 17.594938] dma-pl330 ffb20000.pdma: fill_queue:2441 Bad Desc(3)
[ 17.594950] dma-pl330 ffb20000.pdma: fill_queue:2441 Bad Desc(4)
[ 20.475260] rk3288-lcdc lcdc0: blank mode:0
[ 20.475270] rk1000 tve exit early resume
[ 20.475968]
rk_fb_switch_screen lcdc_id 0 type 1 enable 0
[ 20.475976] rk1000 tve standby
[ 21.104391] ******** Show Sink Info ********
[ 21.104400] Max tmds clk is 0
[ 21.104404] Support video mode:
[ 21.104408] 1920x1080p@60Hz
[ 21.104412] 1920x1080p@50Hz
[ 21.104416] 1280x720p@60Hz
[ 21.104422] 1280x720p@50Hz
[ 21.104430] 720x576p@50Hz
[ 21.104445] 720x480p@60Hz
[ 21.104462] Support video color mode:
[ 21.104471] RGB
[ 21.104480] YCbCr422
[ 21.104489] YCbCr444
[ 21.104510] Support video color depth:
[ 21.104521] 24bit
[ 21.104528] Support audio type:
[ 21.104533] LPCM
[ 21.104537] Support max audio channel is 2
[ 21.104541] Support audio sample rate:
[ 21.104544] 32000
[ 21.104547] 44100
[ 21.104551] 48000
[ 21.104554] Support audio word lenght:
[ 21.104558] 16bit
[ 21.104561] 20bit
[ 21.104564] 24bit

[ 21.104571] ******** Show Sink Info ********
[ 21.311050]
rk_fb_switch_screen lcdc_id 0 type 6 enable 1
[ 21.311064] fb0 win id 1 state 1
[ 21.311123] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
[ 21.311138] fb1 win id 0 state 0
[ 21.311142] fb2 win id 2 state 0
[ 21.311147] fb3 win id 3 state 0
[ 21.311151] fb4 win id 4 state 0
[ 21.311156]
rk_fb_switch_screen lcdc_id 0 type 6 enable 1 done

[ 21.311171] pixel clk is 148500000 tmds clk is 148500000
[ 21.311210] rk3288-hdmi ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
[ 23.399146] snd_pcm_update_hw_ptr0: 6 callbacks suppressed
[ 60.095247] Disconnect cb-Host
[ 60.258688] Indeed it is in host mode hprt0 = 00021501
[ 60.435700] usb 2-1: new high-speed USB device number 2 using usb20_otg
[ 60.435950] Indeed it is in host mode hprt0 = 00001101
[ 60.636557] usb 2-1: New USB device found, idVendor=1f4d, idProduct=0102
[ 60.636663] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 60.636738] usb 2-1: Product: Video Capture
[ 60.636807] usb 2-1: Manufacturer: Geniatech Inc.
[ 60.636874] usb 2-1: SerialNumber: 20090456
[ 300.773501] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
ugoos@Ugoos_box:~$

put *.ko in /system/lib/modules

I hade to make folder "lib" and "modules" than placed files .ko inside