UT3 bricked / IDB bricked ???

[scooter2014]

Hmmmm just curious if last firmware flashed was linux as I had a bitch time after putting it on rkm. I had to use gparted in linux and re format in that once seen.

[RISCy Dude]

Uncortunately, I have not yet been successful in unbricking my original UT3. Though iit will boot/run Ugoos Ubuntu from SD card.
Sux! But better than nothing, I suppose. :-)

[scooter2014]

So seems you un bricked or run from sd?

[gefattern]

Hi ,

i only can copy&paste inside the "www" Field , i want to flash it once new and see what happens ???

but maybe it has to do with my fully debloated Rom ,

greetings / gefattern

[RISCy Dude]

I don't have much experience on Chrome, but the issue sounded vaguely familiar. It seems I recall a box that would not paste in to an empty field, but if you entered a letter/number in to the field, it could be highlighted and pasted over. I don't recall what box or Android version it was. I was just curious. :-)

[gefattern]

"....sorry but i can not copy & paste on my UT4..."

Hello, I am curious about this.

Hi ,

Chrome wont let me "copy&paste" on Webpages , but i am not the only one ,

i know somewhere here in a Thread a User had similar Problems .

Maybe i only have to clean Chrome or install Rom new , not sure why it not

work ,

greetings / gefattern

[RISCy Dude]

"....sorry but i can not copy & paste on my UT4..."

Hello, I am curious about this.

[gefattern]

https://mega.nz/#!3ocTQK4Z!ojORKDCzNciYRiaoqBtrmXZuSYPRFJGxuMRRocl M4So

Hi ,

did you managed to load it , thanks , to both for your efforts to help .

If i want to try the SD Way with "Wasser" is this another Way then

creating a SDCard with Win32Disk... or the used RK Disk Tool ???

Really dont know what i can do to restore , if this PCBs are so called

"unbrickable" , even the TWRP Way dont work , like suggested by a

User called "Remixio" or similar , no Output on Screen , no fix , sh.... .

Maybe i have to go further to a new RK3399 Box ???

I still have to test the "Loaders" u uploaded .

greetings / gefattern

[digitalriver]

https://mega.nz/#!3ocTQK4Z!ojORKDCzNciYRiaoqBtrmXZuSYPRFJGxuMRRocl M4So

[gefattern]

Are you have a link?

Hi to both ,

i am not sure if it really helps , like the Statement of the Dev. it only is for RK3128 , but in

Theory it could maybe be updated by another Dev. ??? , but this shows that there must be

a Way .

If you still both want to try : m.panuso.com/77785388.html , that is the Link u need for it ,

sorry but i can not copy & paste on my UT4 , so i must write down .

greetings / gefattern

[trebor]

What's the Link PanBaidu will give it a go...

[digitalriver]

Hi ,

once more , i found that "rkvcl Tool" but it is a "PanBaidu" Account , can not download , sh......

greetings / gefattern

Are you have a link?

[gefattern]

Hi ,

once more , i found that "rkvcl Tool" but it is a "PanBaidu" Account , can not download , sh......

greetings / gefattern

[gefattern]

Are you need more loaders? I have it:

https://mega.nz/#F!DktETCQT!vvKBdACGWx_-w8cnIrfnkQ

About «rkcvl Tool» - I dont know anything. Might be this

Hi again ,

first here are some useful RK Links :

http://opensource.rock-chips.com/wiki_Rockusb

http://opensource.rock-chips.com/wiki_Rkdeveloptool

http://rockchip.wikidot.com/fastboot

http://opensource.rock-chips.com/wiki_Fastboot

and the Video with restore (download boot fails) can be found on YT with a search for :

"How To Fix Error Download IDB Fail" from User : Hung Thoung Camera ,

now my first results with the "Rockchip Development Tool 1.7" , to get it , only search

with Tool Name on big G .

I was able to connect the Box in MRM to the Tool , then i loaded Loader 2.17 , after that

i pressed "Get Bad Block Status" an the Tool gave out : 1843 i think , rows of CS0 and

they all where filled with "G" letter , after that i tried both "erase" Options but the Tool

only gave out the "missmatch" Error , no Device connected .

I try the Bootloaders you uploaded and report what happend , but for what can i use

the downloaded SDboot.img ???

flashing to Box or what ??? or put on SD with burned Rom ???

greetings / gefattern

[gefattern]

Are you need more loaders? I have it:

https://mega.nz/#F!DktETCQT!vvKBdACGWx_-w8cnIrfnkQ

About «rkcvl Tool» - I dont know anything

Hi ,

maybe good News , i found online "Rockchip Development Tool 1.7" and other helpful Tools , report

if i know more , of course i test the suggested "Loaders" too ,

greetings / gefattern