Got this unit collecting dust due to me flashing the wrong kernel. But the kernel is still resposive as in TTL you can see it responed to devices being plugged into the usb ports.
But for the life of me cant get the thing to go into maskrom mode using the short out padds on the back as pre the guide on the geekbox forum.
So as I'm now being part of this forum I thought I would see if any one here can help. is there away to flash it over TTl? or some other places to shortout to get in maskrom more?
The forum other there is spambot heven now lol
But for the life of me cant get the thing to go into maskrom mode using the short out padds on the back as pre the guide on the geekbox forum.
Code:
In
600MHz
LPDDR3
Bus Width=32 Col=11 Bank=8 Row=14 CS=2 Die Bus-Width=16 Size=2048MB
mach:4
OUT
Boot1 Release Time: 2015-08-13, version: 2.40
ChipType = b 2423
CPUId = 0x0
SDC_BusRequest: CMD=8 SDC_RESP_TIMEOUT 1884
SDC_BusRequest: CMD=5 SDC_RESP_TIMEOUT 1884
SDC_BusRequest: CMD=55 SDC_RESP_TIMEOUT 1884
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=1d1f000
FwPartOffset=2000 , 2000
DATA_BUSY:cmd=0x8
DATA_BUSY:cmd=0x8
DATA_BUSY:cmd=0x8
SdmmcInit=0 400
StorageInit ok = 64264
LoadTrustBL
Trust version:100
Open bl32.bin fail!
LoadBL33
theLoader 200000 111477
INFO: Bl31 Release Time: 2015-10-29, version: 1.7
NOTICE: BL3-1: v1.1(debug):d209b14
NOTICE: BL3-1: Built : 09:26:20, Oct 29 2015
get_chip_info: chip_code is 3368!
pmu_init:pd st (1ee) (1ef)
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x200000
INFO: BL3-1: Next image spsr = 0x3c5
U-Boot 2014.10-RK3368-10-01937-g8fe3a66-dirty (Jun 02 2016 - 21:49:35)
CPU: rk3368
CPU's clock information:
arm pll big = 816000000HZ
arm pll little = 600000000HZ
periph pll = 576000000HZ
ddr pll = 1200000000HZ
codec pll = 400000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM: Found dram banks: 1
Adding bank:0000000000200000(000000007fe00000)
128 MiB
storage init OK!
Using default environment
GetParam
check parameter success
remotectl v0.1
failed to prepare fdt from boot!
power key: bank-0 pin-2
can't find dts node for ricoh619
can't find dts node for act8846
pmic:rk808
can't find dts node for pwm0
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2015-11-12#2.40
empty serial no.
checkKey
vbus = 1
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
no fuel gauge found
no fuel gauge found
read logo on state from dts [1]
can't find dts node for deviceinfo
rk_hdmi_register:fail to read deviceinfo
hdmi baseparamer 129437x33619980@33685516-46
tve baseparamer 129438x17371112@111-1852009585
Hdmi Devices Not Exist.
can't find dts node for rk1000
parse rk1000 dts error!
failed to find part:logo
no fuel gauge found
checkKey
vbus = 1
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
Hit any key to stop autoboot: 0
load fdt from resouce.
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 0
kernel @ 0x00280000 (0x00dc44b0)
ramdisk @ 0x05bf0000 (0x0014722c)
bootrk: do_bootm_linux...
Loading Device Tree to 0000000005600000, end 000000000561a297 ... OK
Add bank:0000000000200000, 000000007fe00000
Starting kernel ...
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuacct
[ 0.000000] [0: swapper: 0] Linux version 3.10.0 (dale@dale-All-Series) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Aug 15 18:54:59 BST 2016
[ 0.000000] [0: swapper: 0] CPU: AArch64 Processor [410fd033] revision 3
[ 0.000000] [0: swapper: 0] Machine: rockchip,rk3368
[ 0.000000] [0: swapper: 0] rockchip_uboot_logo_setup: mem: 0x0000000002000000@0x000000007dc00000, offset:0x0000000000000000
[ 0.000000] [0: swapper: 0] hdmi init vic is 65536
[ 0.000000] [0: swapper: 0] rockchip_uboot_mem_reserve: reserve 0x0000000002000000@0x000000007dc00000 for uboot logo
[ 0.000000] [0: swapper: 0] rockchip_ion_reserve
[ 0.000000] [0: swapper: 0] ion heap(cma): base(0) size(0) align(0)
[ 0.000000] [0: swapper: 0] ion heap(vmalloc): base(0) size(0) align(0)
[ 0.000000] [0: swapper: 0] cma: CMA: reserved 16 MiB at 7cc00000
[ 0.000000] [0: swapper: 0] psci: probing for conduit method from DT.
[ 0.000000] [0: swapper: 0] psci: PSCIv1.0 detected in firmware.
[ 0.000000] [0: swapper: 0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] [0: swapper: 0] PERCPU: Embedded 12 pages/cpu @ffffffc07fd0d000 s18688 r8192 d22272 u49152
[ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516615
[ 0.000000] [0: swapper: 0] Kernel command line: earlyprintk=uart8250-32bit,0xff690000 console=ttyS2 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyS2 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x00008000@0x00010000(kernel),0x00010000@0x00018000(boot),0x00010000@0x00028000(recovery),0x00038000@0x00038000(backup),0x00040000@0x00070000(cache),0x00002000@0
The forum other there is spambot heven now lol
Comment