Unbrick Rk329Q - V 3.0

[Fjullen]

how do I restore the ROM from my "Mxq-4k"?
note: IDB fails in all tests

[luissoza]

I also have a problem with my Android box MXQ-4k, it does not go beyond the MBOX logo, I'm also looking for the firmware of this device, it's the same model as yours

[gefattern]

how do I restore the ROM from my "Mxq-4k"?
note: IDB fails in all tests

Hi ,

did you check to Log files , are still all Sectors okay ??? , i have nearly the same with

my UT3 , one Sector is bricked , Output says 1-4 but test gives out only 1-3 .

greetings / gefattern

[Fjullen]

in my case the error is in sector 5-3 that is the one of the IDB, I do not know very well, already tried with several roms, wanted to know how to enter in mashmode. to try for a rom without crash.

[Fjullen]

I also have a problem with my Android box MXQ-4k, it does not go beyond the MBOX logo, I'm also looking for the firmware of this device, it's the same model as yours

if you have how to send me the rom of this mxq-4k Rk329Q - V 3.0

please feel free ...

[RiadM]

short these pins

[alanmoreirax]

I already had this broblema in my mxq-4k Rk329Q - V 2.0. The solution was to use AndroidTool v2.35 and click on EraseFlash before Upgrade.

[Fjullen]

I already had this broblema in my mxq-4k Rk329Q - V 2.0. The solution was to use AndroidTool v2.35 and click on EraseFlash before Upgrade.

Qual Firmware utilizou? a minha ainda não funciona e nem liga a tv box.

[gefattern]

English , please , thanks / gefattern

[Fjullen]

short these pins

No works!
i need compatible firmware

[asmar]

i need compatible firmware- rom of this mxq-4k Rk329Q - V 3.0

thanks

[romanocruz]

short these pins

can you pls give me how to short and procedure for flashing

[rocky_978]

how do I restore the ROM from my "Mxq-4k"?
note: IDB fails in all tests

This is the correct firmware for that box

https://mega.nz/#!2k8EzJxY!cY_NWvIyof8Rnd7syOK9OYc5Fot19Ub76L46nzTrAAU

[vodor]

Thanks for this post and all the contributions folks. After reading many forum posts I stumbled onto this one. Exact same board as mine and I was able to get out of the adb fail error by shorting the pins in the picture. Flashed kingrom and it looks like its booting now.

[cocoliso]

Hola con todo el grupo o foro. Me podrian ayudar con mi placa MXQ_RK3229_V2.0 , Con wifi S9012P