Unbrick V88 MX4VR-V01?

[Bidi]

I have a V88-Box MX4VR-V01. Which Pins I have to short for MASKMODE?
On MX4N-V20 or MX4N-V03 I shorted Pins 29+30 for MASKMODE.
Is this the same on MX4VR-V01?

[pepepaco]

try all of them

[Bidi]

Hello pepepaco,
could you mark the Pins on the Photo?
Pin 1 is right above and Pin 24 left above...

Thanks!

[karelkopp]

i cutting pins 6-7 in your picture pin 25 is pin 1 or i will cutting what you see in picture in little circle

[iptvmove]

sorry for English Did you solve it? I have this same board (MX4VR-V01) I have questions about how to perform the procedure of the pins. Do I do this before or after connecting USB? must be connected to the power supply?

[manu_manu4]

Before with no power supply

[iptvmove]

I have tested it several times, even other pins, nothing else happens. The box is not recognized on the pc. The tv box still works, as it still has the red led on. It is not problem of cable usb or the pc, because in other tv box everything works.

any other suggestions?

[giancai]

Before with no power supply

hi.....also i have try to upgrade firmware but is failed on MX4VR-V01..... now when i connect the power and cable hdmi, it's not start and on the tv no signal....i think that is bricked.... i can restore my box tv android???

[gefattern]

Hi to all ,

short Pins on RK for MaskRomMode are mostly Pins 7/8 , 8/9 , begin to count in Corner with triangle ,

good luck / gefattern