MXQ 4K "XT-MX4VN_V10" FIRMWARE HELP

[AY_248]

DEAR EXPERTS KINDLY GUIDE ME WHICH FIRMWARE IS BEST FOR MY MXQ 4K TV BOX.

BOARD: CHIPTRIP XT-MX4VN_V10
CHIP: RK3229
ANDRIOD VERSION: 7.1.2
RAM: 1GB
ROM: 8GB
WIFI: SV6051P

THE EXISTING FIRMWARE IS TO SLOW AND LAGGY.

[AY_248]

79 Review but no reply..strange

[gefattern]

79 Review but no reply..strange

Hi ,

already found something that works ???

do you have a Backup of your Rom ??? , if can you please upload ,

even if it not good runs on your Box , maybe helpful for others too ,

like him :

https://forum.freaktab.com/forum/tv-player-support/rockchip-based-tv-players/rk3229-devices/758513-mxq-4k-not-boot

thanks , greetings / gefattern

[diego2peres]

Hello! I have a box with exactly these specifications (XT-MX4VN_V10) and I need the ROM. I tested several on the internet but unfortunately none worked. Why is the backup available? Thank you

[kaekido]

Hello, have you solved the problem? I have such a device is working, but very slow, can I send the good firmware? If you need my own firmware, just teach me how to extract what I'm sending.

[GopherTux]

Hello, i have the same board XT-MX4VN_V10, after search a lot i did install android 8.1 in this board, you can search roms for the MX4VR, all roms for this board work for me, i'm using this rom now

https://chinagadgetsreviews.com/down...a8-tv-box.html

For flash this firmware i used the AndroidTools from this git repository https://github.com/rockchip-linux/tools
Install the DriverAssistant, open the AndroidTools, put the board in the MaskRom Mod joining the pins 5 and 6 of the Nand chip (i used a mini Phillips wrench), plug OTG USB cable, go to upgrade tab, after that load the rom, them erase flash and upgrade.

This rom is running very well, Netflix, Youtube and RKMC are working great.