I am a new member to this forum.
I read many interesting articles and methods to flash.
But I am searching for a compatible firmware (or the stock one) for my specific machine, which details follows:
Its a MXQ Pro 4K 5G (new variant as far as I can see) which I recently bought and managed to brick it.
Wifi chip: SV6051P.
CPU: RK3228A.
EMMC chip: Samsung KLM8G1GEAC-B001 8GB.
Memory chips: Hynix H5TQ1G43BFR, 8 of them, total 2GB RAM.
The above machine has manipulated android versions in its firmware and RAM / ROM sizes. It says in its box and when was working (and I bought it as) 4GB RAM and 64GB ROM. It’s true specs are 2GB RAM and 8GB ROM.
I already got all the tools and downloaded many firmwares and tried to restore it and failed. Most of the times it ended up bricked or not booting.
I managed to clean Emmc with multitool to unbrick it so I can either boot from SD card or reprogram it with mask rom.
I did it many times already trying out the various firmwares I got online. I tried SD Firmware tool too but since I erased the Emmc there is not a bootloader and recovery available to perform the flash. So it does not boot at all with it.
The only two that works are the multitool and a LibreELEC build I have, both from SD cards.
I ask you, if you have such a box, or if you have the firmware of it, can you please give it to me so I can fix it again?
Please see the attached pictures to help me locate its firmware.
My primary goal is to use it as an emulator machine to play games. If I can restore it, now that I have some knowledge of how (not) to break things haha, I would like to have it as an Android TV box AND as an emulator machine.
Thanks for your time, and since the machine is bricked I can test anything.
Comment