H96 Max RK3318 Android 10

[manu_manu4]

The box is now with Android 10
https://www.banggood.com/H96-MAX-RK3...p-1671767.html

I found the firmware in 4PDA

https://drive.google.com/drive/folde...ToCAWftFgAWLJb

[manu_manu4]

I try it, i don't know if it's not a fake Android 10



See a screensghot of X-plore (directly installed) with others installed apks

[Nemo17]

good, works ;-)

[Lukiwa]

H96 max upgrade to android 10 tutorial

https://youtu.be/AKV_ednZ5Zs

[Nemo17]

https://www.h96tvbox.com/content/6-Firmware-upgrade

[lucaslks]

can you help me where i find firmware 7.1 or 8.1 for H96 Max Rk3318? because I want to use Hijack and it is not compatible with recent Android.

[widi23]

My TV Box is H96 Max Plus 4 / 64gb RK3328.
But I Flash with Firmware H96 Max RK3318 Android 10, and the result is very good, everything works normally,
not only flash and I have also succeeded in Root Firnware H96 max rk3318 Android 10 with Magisk.
Here I will tell you how to Root H96 max Android 10 with Magisk.
You download the material first, click the link below.
After downloading you extract the file, there are two files, you install the Magisk manager apk, then you just move magisk_patched.img to the storage sdcard / Download / ....
Now it's up to you Execution ...
Go to Settings then scroll to Device Preferences then you scroll again to Developer Options, scroll again to (Go to loader) click "Select Image to Flash Dengerous: This operation can cause system instability"
There you just need to point to the file "magisk_patched.img", then there are several options, you select the "boot" then click OK.
Wait a few seconds until finished Flash.
Finally, you just need to reboot the device.
After the device turns back on, then Open Magisk Manager, which was already installed.
And Taraaaa .... It worked !!!
https://i.ibb.co/P5k1rW5/Gambar1.jpg
https://i.ibb.co/FhGjmDc/Gambar2.jpg
https://i.ibb.co/hmvZ7cx/Gambar3.jpg

Link ;
https://mega.nz/file/hvYhSCAZ#gSrEde...hg-md8onMertDg

[widi23]

can you help me where i find firmware 7.1 or 8.1 for H96 Max Rk3318? because I want to use Hijack and it is not compatible with recent Android.

You can download it here
https://chinagadgetsreviews.com/down...-tv-box-4.html

[catalaman]

My TV Box is H96 Max Plus 4 / 64gb RK3328.
But I Flash with Firmware H96 Max RK3318 Android 10, and the result is very good, everything works normally,
not only flash and I have also succeeded in Root Firnware H96 max rk3318 Android 10 with Magisk.
Here I will tell you how to Root H96 max Android 10 with Magisk.
You download the material first, click the link below.
After downloading you extract the file, there are two files, you install the Magisk manager apk, then you just move magisk_patched.img to the storage sdcard / Download / ....
Now it's up to you Execution ...
Go to Settings then scroll to Device Preferences then you scroll again to Developer Options, scroll again to (Go to loader) click "Select Image to Flash Dengerous: This operation can cause system instability"
There you just need to point to the file "magisk_patched.img", then there are several options, you select the "boot" then click OK.
Wait a few seconds until finished Flash.
Finally, you just need to reboot the device.
After the device turns back on, then Open Magisk Manager, which was already installed.
And Taraaaa .... It worked !!!
https://i.ibb.co/P5k1rW5/Gambar1.jpg
https://i.ibb.co/FhGjmDc/Gambar2.jpg
https://i.ibb.co/hmvZ7cx/Gambar3.jpg

Link ;
https://mega.nz/file/hvYhSCAZ#gSrEde...hg-md8onMertDg

hello my friend i did the update of rk3318 but i lost the wifi connect help plz

[catalaman]

The box is now with Android 10
https://www.banggood.com/H96-MAX-RK3...p-1671767.html

I found the firmware in 4PDA

https://drive.google.com/drive/folde...ToCAWftFgAWLJb

hello my friend i did the update of rk3318 but i lost the wifi connect help plz

[Crash Tester]

hello my friend i did the update of rk3318 but i lost the wifi connect help plz

I just finished flashing my rk3318 with update and then rooted it with Magisk everything works perfectly, I would try to reflash with fresh download. Or if you go into Developer Options, use the flash in there to target a specific partition with an extracted image. There is a rockchip tool for extracting from install images and then everything is separated by partition.


Note: if your rooting make sure and install Magisk manager first then use that to make your boot.img then after you flash reboot.

Sent from my moto g(8) power using Tapatalk

[uncle H]

My TV Box is H96 Max Plus 4 / 64gb RK3328.
But I Flash with Firmware H96 Max RK3318 Android 10, and the result is very good, everything works normally,
not only flash and I have also succeeded in Root Firnware H96 max rk3318 Android 10 with Magisk.
Here I will tell you how to Root H96 max Android 10 with Magisk.
You download the material first, click the link below.
After downloading you extract the file, there are two files, you install the Magisk manager apk, then you just move magisk_patched.img to the storage sdcard / Download / ....
Now it's up to you Execution ...
Go to Settings then scroll to Device Preferences then you scroll again to Developer Options, scroll again to (Go to loader) click "Select Image to Flash Dengerous: This operation can cause system instability"
There you just need to point to the file "magisk_patched.img", then there are several options, you select the "boot" then click OK.
Wait a few seconds until finished Flash.
Finally, you just need to reboot the device.
After the device turns back on, then Open Magisk Manager, which was already installed.
And Taraaaa .... It worked !!!
https://i.ibb.co/P5k1rW5/Gambar1.jpg
https://i.ibb.co/FhGjmDc/Gambar2.jpg
https://i.ibb.co/hmvZ7cx/Gambar3.jpg

Link ;
https://mega.nz/file/hvYhSCAZ#gSrEde...hg-md8onMertDg

I tried doing this but didn`t work for me

[uncle H]

hello my friend i did the update of rk3318 but i lost the wifi connect help plz

Did you get wifi to work

[Station]

Station P1 (RK3399) also supports Android 10.
https://www.youtube.com/watch?v=jIz-BitkMv0

[widi23]

Did you get wifi to work

Have you flashed the HK R1 Box firmware