Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Alfawise Z28 Pro Smart TV Box A7 2/16GB Dual WiFi Gig Lan BT4

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    So they lies because I got this and even in answers they told :It supports Bluetooth4.0 . !
    Just US$33.99 + free shipping, buy Alfawise Z28 Pro Smart TV Box online shopping at GearBest.com.

    Comment


      #32
      How about the cannot power up issue after the TVBOX is being standby for a while, any firmware update to fix this ?

      Comment


        #33
        Thank you, trebor, for the firmware links.

        Has anyone managed to login to Android or to break into either the Rockchip or the U-Boot boot loader using the serial console?
        I have only managed to get the boot loaders' log output but unfortunately I get no further output once the Android/Linux kernel starts booting.
        I thought the baud rate might have changed but setserial says it is 1.5 Mbps as for the boot loaders.
        The situation is the same with both the stock firmware and trebor's firmware.

        I have also been unable to get Bluetooth working: it disables itself almost immediately.
        Judging from dmesg there seems to be a conflict between BT and the serial console.
        UPDATE: BT works if I unsolder my serial console. So there is clearly an interaction between them

        I should be most grateful for any help.
        Last edited by segv; 09-14-2017, 19:49.

        Comment


          #34
          Originally posted by trebor View Post
          Do you have the 2/8 or 2/16 version ?
          only 2/16 Has BT
          Are you sure ?

          Comment


            #35
            This box not output 5.1 sound. only stereo !

            Comment


              #36
              I found a solution to three problems.
              1 - only brum sound on AV output (stereo output),
              2 - freezing the box on alternative firmware,
              3 - low quality wifi or bluetooth signal.

              Check the dimensions of the jack plug and select the appropriate drill bit.
              Open the casing and remove the motherboard - check that it works on this cable.
              Enlarge the AV output hole.
              Make sure your wifi and bluetooth antennas are not short circuited. Solder again if there is a short circuit.
              My device overheated. The heatsink is very small and was badly glued.
              Gently remove the heat sink from the processor. Remove the adhesive tape. For gluing, use a thermal adhesive, do not use adhesive tape. The processor is not flat and the tape is not covere on the processor. If you have - use a thicker heat sink.

              Comment


                #37
                What is the build number of the last original firmware?
                My box says:
                rk3338_box-userdebug 7.1.2 NHG47K eng.qinzhendong.20170920.154141 test-keys
                So it's the last?

                Inviato dal mio ASUS_Z00AD utilizzando Tapatalk

                Comment


                  #38
                  Hello,
                  Can anyone provide firmware image for Z28Pro PCB XJH-RK28-V11.
                  Stock Build: rk3328_box-userdebug 7.1.2 NHG47K eng.qinzhendong.20170830.225537 test-keys

                  Flashed superceleron SCV2 , and now it does not pass boot.
                  I think it have something to do with loader.

                  Already tried:
                  Restore, via AndroidTool 2.3.9, with partition images, backup made with rkDumper 1.05
                  Flashed Z28_universal_stock_supersu_10_08_2017
                  Flashed LUSHEN_XJH_RK28_V10_A7_1_RTL8822BS_Z28Pro_20170727 115958

                  Rectification:
                  managed to install superceleron SCV2 in XJH-RK28-V11
                  unpacked firmware.img and installed all partitions except the loader
                  correct loader is MillionALL.bin

                  AndroidTool_2.3.9
                  DriverAssistant_4.5
                  XJH-RK28-V11-superceleronSCV2 (unpacked)









                  this is for PCB marked as XJH-Q7L-V00
                  LUSHEN_XJH_Q7L_V00A7_1_RTL8822BS_lpddr3_Z28Pro_201 70830231210
                  LUSHEN_XJH_Q7L_V00A7_1_RTL8822BS_lpddr3_Z28Pro_201 71110182421
                  Attached Files
                  Last edited by lapinpt; 11-17-2017, 03:03.

                  Comment


                    #39
                    Originally posted by lapinpt View Post
                    Hello,
                    Can anyone provide firmware image for Z28Pro PCB XJH-RK28-V11.
                    Stock Build: rk3328_box-userdebug 7.1.2 NHG47K eng.qinzhendong.20170830.225537 test-keys

                    Flashed superceleron SCV2 , and now it does not pass boot.
                    I think it have something to do with loader.

                    Already tried:
                    Restore, via AndroidTool 2.3.9, with partition images, backup made with rkDumper 1.05
                    Flashed Z28_universal_stock_supersu_10_08_2017
                    Flashed LUSHEN_XJH_RK28_V10_A7_1_RTL8822BS_Z28Pro_20170727 115958

                    Rectification:
                    managed to install superceleron SCV2 in XJH-RK28-V11
                    unpacked firmware.img and installed all partitions except the loader
                    correct loader is MillionALL.bin

                    AndroidTool_2.3.9
                    DriverAssistant_4.5
                    XJH-RK28-V11-superceleronSCV2 (unpacked)









                    this is for PCB marked as XJH-Q7L-V00
                    LUSHEN_XJH_Q7L_V00A7_1_RTL8822BS_lpddr3_Z28Pro_201 70830231210
                    LUSHEN_XJH_Q7L_V00A7_1_RTL8822BS_lpddr3_Z28Pro_201 71110182421
                    https://mega.nz/#!yNBhFDxJ!eLhQdVMz9...bIXpyrjJDJ3cfU
                    do not work link((

                    Comment


                      #40
                      Originally posted by Aleks Kent View Post
                      do not work link((
                      sorry but I tested it and it works

                      Comment


                        #41
                        Originally posted by lapinpt View Post

                        sorry but I tested it and it works
                        sorr)now working,good luck!

                        Comment


                          #42
                          please help.
                          no computer with any usb cable sees this box. therefore no tool works. it's just not seen as a usb device. any suggestions?

                          Comment


                            #43
                            What's working and what's not with which FW? The conversation got a bit confused and did some try to use this Box with Rock64 or other Desktop-Images? It seems to be pretty similar to the Pine64 Board.

                            Comment


                              #44
                              Originally posted by lapinpt View Post
                              Hello,


                              Rectification:
                              managed to install superceleron SCV2 in XJH-RK28-V11
                              unpacked firmware.img and installed all partitions except the loader
                              correct loader is MillionALL.bin
                              what is the exact procedure step by step plz? idiot proof if possible.

                              Comment


                                #45
                                I have aquestion.
                                Who have Alfawise z28pro using with 4K TV?
                                Is The resolution really 4k? (mine is 1080p)
                                In Kodi looking about device i see resolution 1280x720, is that mean my videos are only 720p?

                                Comment


                                • mo123
                                  mo123 commented
                                  Editing a comment
                                  Yes, all the 4K and 1080p videos will be downscaled to 720p.
                                  It will only play in 1080p or 4K if your device supports auto frame-rate in Kodi which it doesn't.
                              Working...
                              X