[ROM] AlfaWise Z28 Pro 2Gb/16Gb - SCV2

[Alianato]

by the way my stock rom is:
333_1.05____LUSHEN_XJH_Q7L_V00A7_1_RTL8822BS_lpddr 3_Z28Pro_20170830231210

not sure if this is the latest, but at least it´s working, I could install the Microsoft launcher but it annoys me that I cannot see the navigator/status bars

[Alianato]

Hi,
I imagine that it´s a problem with bootloader but I don´t know how to solve it, I thought in extracting it from the stock rom and injecting in the superceleron rom via Android tool, but I am not sure if this is the reason and I don´t know how to do it.
superceleron we need your help :-)

[garcimak]

Hi, I am trying to install the superceleron rom for this box (2/16 GB) but after doing it the box stays stuck on boot screen.
I try several tools for that:
RK_Android_Tool_2.3.9
RockChip_Batch_Tool_v1.8
RockChip_FactoryTool_v1.39

and the result is always the same, the only way to get the box working is to reinstall the stock rom.
any advise on how to solve this issue, I really would like to test this superceleron rom

exact same behaviour than mine, boot screen with no loading bar, animation whatsoever.

[Devulder]

Thanks for trying.
I stay tuned and hope that you can find a solution because without drm i can't really use my Z28

[Alianato]

Hi, I am trying to install the superceleron rom for this box (2/16 GB) but after doing it the box stays stuck on boot screen.
I try several tools for that:
RK_Android_Tool_2.3.9
RockChip_Batch_Tool_v1.8
RockChip_FactoryTool_v1.39

and the result is always the same, the only way to get the box working is to reinstall the stock rom.
any advise on how to solve this issue, I really would like to test this superceleron rom

thanks

[Devulder]

Hi
Is it possible to use this ROm on a Z28 as it isn't an alfawise Z28 ?
Thanks

[wsoalves]

Hello, I would like to change my question because I was able to install it, Grate! On the other Z28 I installed the update: 333_1.05 ____ LUSHEN_XJH_Q7L_V00A7_1_RTL8822BS_lpddr3_Z28Pro_201 70830231210 posted above (# 31) that corrects the problem of Remote Control not turning on. superceleron have something for the same to occur in your ROM? Thank you!!

[garcimak]

Tomaj
thank you mate, i can flash stock firmware posted by morrislkm but this custom rom is problematic with my device
zyp, could you report how does it work for you, has your model proprer ventilation hole on the bottom, mine not (unlike product desc)

[superceleron]

Hi, superceleron, can I use this rom AlfaWise Z28 Pro 2Gb / 8Gb?
Thank you.

Yes!

[zyp]

Hi, superceleron, can I use this rom AlfaWise Z28 Pro 2Gb / 8Gb?
Thank you.

[Tomaj]

Load the original firmware and if nothing starts or goes bad, turn it off and then turn on, wait a few minutes. Turn off-on and re-upload the original fimware.
Make sure that the processor is properly cooled.

http://freaktab.com/forum/tv-player-support/rockchip-based-tv-players/rk3328-devices/652058-alfawise-z28-pro-smart-tv-box-a7-2-16gb-dual-wifi-gig-lan-bt4?p=673366#post673366

[garcimak]

Stuck forever on loading screen after flashing the 2/8gb model. No loading bar, no animation. could somebody with this model (no BT) confirm ?

now trying to flash official firmware back (#post31 link) but losing ethernet in the process, is this for 2/16gb only.

[Alianato]

I understand, but I succeeded to solve the issue with another box thanks to the help of superceleron, so I guess that box will be tied to my 'old' Sony TV.
This one, that I have intention to buy, will be connected to an LG TV, in my living room.
Thank you for your answer

[mo123]

Hi, does this box have problems with old Sony and Philips boxes, I mean the rgb issue?
Thanks

Yes, since there is no setting to change it.
Time to get a non Sony/Philips tv as the fault lies there.

[Alianato]

Hi, does this box have problems with old Sony and Philips boxes, I mean the rgb issue?
Thanks