If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
MX10 Android 7.1.2 RK3328 4/32GB TV BOX 2.4GHZ WiFi Fast Lan
It flashed, rebooted, erase circle on screen, then shutdown. Never got to the Mbox screen.
Now it is hard bricked. PC doesn't detect it when plugged into USB. Red light only.
Have not seen a blue light since it shutdown.
It's back from the dead. Nand mask method worked...
Here are the steps for anyone in a similar situation.
1) PC: Open Rockchip Batch Tool, load firmware image (I chose a 7.1 image)
2) MX10: Connect HDMI to monitor. Short eMMC pads (photo 1), at same time press reset switch, then plug USB OTG into PC
3) PC: beeps. MX10 appears as yellow icon in Batch Tool.
4) MX10: release short and reset switch
5) PC: flash image.
6) MX10: When flash finishes, MX10 reboots.
... Erase circle appears on screen (for about 5 secs),
... Mbox logo comes on screen (for about 5 minutes),
... Screen changes to warning not to turn power off (for about 5 minutes)
... UI screen appears.
I had to try step 2 a few times before it worked. You may need an extra pair of helping hands.
Cheers,
Jack.
You may only view thumbnails in this gallery.
This gallery has 2 photos.
It flashed, rebooted, erase circle on screen, then shutdown. Never got to the Mbox screen.
Now it is hard bricked. PC doesn't detect it when plugged into USB. Red light only.
Have not seen a blue light since it shutdown.
Same thing here - tried to flash the 8.1 image several times using both the FactoryTool and BatchTool. Doesn't work. What happened is exactly the same UncleJack already wrote - "flashed, rebooted, erase circle on screen, then shutdown. Never got to the Mbox screen". I also tried to flash several 7.1 images - they all work.
I also used this tool, even tried several different versions. There was no any errors during the flash process but at the end the MX10 was not able to boot with the 8.1 image - after the MX10 logo the blue led turns to red and that was it. It always works fine when 7.1 images are used. Just don't get it - are there any known differences in the hardware used in MX10?
It's back from the dead. Nand mask method worked...
Here are the steps for anyone in a similar situation.
1) PC: Open Rockchip Batch Tool, load firmware image (I chose a 7.1 image)
2) MX10: Connect HDMI to monitor. Short eMMC pads (photo 1), at same time press reset switch, then plug USB OTG into PC
3) PC: beeps. MX10 appears as yellow icon in Batch Tool.
4) MX10: release short and reset switch
5) PC: flash image.
6) MX10: When flash finishes, MX10 reboots.
... Erase circle appears on screen (for about 5 secs),
... Mbox logo comes on screen (for about 5 minutes),
... Screen changes to warning not to turn power off (for about 5 minutes)
... UI screen appears.
I had to try step 2 a few times before it worked. You may need an extra pair of helping hands.
Cheers,
Jack.
Is the 8.1 image rooted.. or did you even have time to find out?
I never got an 8.1 image to work. The three 7.1 images I've tried are imperfectly rooted, i.e. the su binary is present and usable, but SuperSu won't install.
I never got an 8.1 image to work. The three 7.1 images I've tried are imperfectly rooted, i.e. the su binary is present and usable, but SuperSu won't install.
So it seems that the 8.1 image is not compatible with any MX10 box. While someone like trebor managed to flash the 8.1 image without any problems, others like you and me can't do it. Is there any particular reason for that? Different hardware revisions?
I never got an 8.1 image to work. The three 7.1 images I've tried are imperfectly rooted, i.e. the su binary is present and usable, but SuperSu won't install.
I got a rooted 7.1.2 fw that works. I also installed the TWRP.img posted here in RC 3328 forum. I used an app called Rashr from the playstore to install it
Hi everybody, I have installed the new firmware 8.1 on my Mx10, that I have bought in January, and it's works fine, but no rooted, and I don't can root with magisk, Kingo root works when I root with my PC but when I reboot the rooting disappear... If anyone has a solution for rooting Mx10 on this new firmware, please post it...
Sorry for my English, I'm French...
Have a nice day..
Hi Guys
I bought an MX 10 with 7.1.2 from Gearbest.
My problems are
1. I cant clear the running programs however hard i try. Tried using many Cache cleaners but no avail. Also tried many options as suggested by youtube videos but nothing worked.
Can any buddy help me out?
2. I dont have bluetooth on the device
3. In netflix cant change the resolution
Hi Guys
I bought an MX 10 with 7.1.2 from Gearbest.
My problems are
1. I cant clear the running programs however hard i try. Tried using many Cache cleaners but no avail. Also tried many options as suggested by youtube videos but nothing worked.
Can any buddy help me out?
2. I dont have bluetooth on the device
3. In netflix cant change the resolution
regards
If you mean clear apps from memory just hold down home button and find the app you want to clear and press down on d-pad and ok. As for bluetooth no one has it.. were all sol.
I dont use Netflix so no help there
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment