Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
MX10 android box help
Collapse
X
-
I have the some problems..
but i have resoult...
For first you mush use firmware d4
http://geekbuying.mediafire.com/file...80528.img/file
(ddr4) e not r1 o r2...(ddr3)
And flash with use factory tool only entering in maskroom mode ...
Leave a comment:
-
thank you all of u for helping me. i have attached and i did firmware but it still hang not working some time red light some time blue light i think firmware is not right
because my BOX MX10 4GB Ram and 64 gb rom
and dated
PASSD4-64G
2018/09/10
Leave a comment:
-
Download this document and try from step 1 to the end it worked for my brother when he was in the same boat. If this doesn't work then I am lost mate.
also try a different USB port on your PC.
Leave a comment:
-
BROTHER I AM TRYING IT CONNECT WTH MASKROM
BUTWHEN I PUSH UPGRADE IT GIVE MASSAGE DOWNLOAD BOOT FAIL
WHAT IS THAT PROBLEM
Leave a comment:
-
Hi mate try factory tools 1.39 and try driver assistance 4.3 and only use USB port 4
here is the link
http://chinagadgetsreviews.blogspot....-v139.html?m=1
Have a look here for some firmware too
Leave a comment:
-
Make sure you installed the right drivers or your computer will not detect the box at all.
Leave a comment:
-
thank you for your response brother rk develpores tool also not detect my box its show no device found just red light on
Leave a comment:
-
Hello,
So the Factory Tool is not the right one to Burn these Box.
You have to use Android Tool also you have to erase the Box incl. Bootloader before Downgrade.
You can Download the Tool here: --> https://drive.google.com/file/d/16AQ...ew?usp=sharing
Start the Tool connect your Box in Upgrade Mode an do the following:
1.: Click on "Upgrade Firmware"
2.: Click on "Firmware" and select your Android 7.1 Firmware
3.: Now Click on "Erase Flash"
After that your Device is in Mask Rom Mode
4.: You can now Downgrade your Device with the Press on "Upgrade"
That?s it.
If it not Work proper then also connect the Power Cord after you put the Device in Upgrade Mode.
Neomode
Leave a comment:
-
MX10 android box help
i have MX10 4gb/64gb it has android 8.1 i want to downgrade to 7.1 noghat i got all driver and android on geekbuying 1st time it connected with factory tool 1.6 and it started upgrading when it goes 15% it failed after that my box just red light on nothing else no connected with computer i install alot of drivers but the factory tool not detect my box just red light on plz help me i am worried about my box because 2 month ago i bought it plz some one help meTags: None
What's Going On
Collapse
There are currently 8356 users online. 6 members and 8350 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Leave a comment: