Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Fix IDB failure for RK devices

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • gefattern
    replied
    Originally posted by charan View Post

    but it dosent have loader file,
    let me share u link of that file

    https://drive.google.com/file/d/1W3a...ew?usp=sharing
    Hi ,

    i already explained how too extract loader from .img file , first unzip than unpack with Tool , and please stay with your Problem in one Thread , lets go on in the other Thread of you , no need to do twice ,

    greetings / gefattern
    Last edited by gefattern; 07-15-2020, 18:25.

    Leave a comment:


  • charan
    replied
    Originally posted by gefattern View Post

    Hi ,

    .zip is a compressed file , you can uncompress it with 7zip tool on PC ,

    or any Zipper App from Store on Handy , no need to do something else ,

    good luck / gefattern
    but it dosent have loader file,
    let me share u link of that file

    https://drive.google.com/file/d/1W3a...ew?usp=sharing
    Last edited by charan; 06-29-2020, 04:41. Reason: https://drive.google.com/file/d/1W3aiq8O94WxVr7R176SkPMJzrzeVDvve/view?usp=sharing

    Leave a comment:


  • gefattern
    replied
    Originally posted by charan View Post

    i dont have .img firmware , i have in .zip type only

    can i get it from another working box??


    thank you
    Hi ,

    .zip is a compressed file , you can uncompress it with 7zip tool on PC ,

    or any Zipper App from Store on Handy , no need to do something else ,

    good luck / gefattern

    Leave a comment:


  • charan
    replied
    Originally posted by gefattern View Post

    Hi ,

    think the four golden holes , left of CPU Chip , but they not marked as ... ,
    the Loader can be extracted from full .img file with Androidtool 2.38 or above , third tab , load .img to "unpack" row & unpack , the single files will be saved in AT Folder under
    Output , i think ,

    good luck / gefattern
    i dont have .img firmware , i have in .zip type only

    can i get it from another working box??


    thank you

    Leave a comment:


  • gefattern
    replied
    Originally posted by charan View Post

    CAN YOU HELP ME TO SPOT GND AND CLK PINS
    Hi ,

    think the four golden holes , left of CPU Chip , but they not marked as ... ,
    the Loader can be extracted from full .img file with Androidtool 2.38 or above , third tab , load .img to "unpack" row & unpack , the single files will be saved in AT Folder under
    Output , i think ,

    good luck / gefattern

    Leave a comment:


  • charan
    replied
    Originally posted by gefattern View Post

    Hi ,

    Drivers installed ???

    did you check the Loader in Tool ???

    which ATool did you use ???

    what Loader did you use ???

    Maybe your Box has another Problem , which Box ???

    greetings / gefattern
    CAN YOU HELP ME TO SPOT GND AND CLK PINS

    Leave a comment:


  • charan
    replied
    Originally posted by Haizenberg View Post
    Steps for repairing IDB failure are:

    1-use Andriodtool v 2.51 or higher
    2-you have to have a working loader (you can unpack any working rom using andriodtool by going to _Advanced Function_ and from here download a working firmware and unpack it by pressing unpack. Note, you can find the (loader) in (output folder created by Andriodtool).
    3-using Andriodtool, go to download tab and from there you can see (loader)(parameter) etc. jst focus on loader and upload that loader and put mark so that it can be flashed to your device.
    4-let Andriodtool reconized your device as Maskrom device.
    5-Finally, before hitting (Run), make sure you use tweezers or anything to to short circuit (GND and CLK inside the board) and hit run.
    6-The device will flash the loader into the board and you can now download a working rom for your device easily and get rid of IDB failure.

    Note, If the above steps do not work with you, you can try :

    1- press the recovery button on the device and (hold it)
    2- Open Andriodtool 2.51 and upload a working firmware and hit (erase flash while holding the recovery button).
    3-If you do not succeed with andriodtool, you can use factory tool ( 1.6, 1.63, or any version)
    4- I hope this second method will work.
    I dont have firmware in img type ,
    i dumped firmware from another box of same kind using parameter in android tool

    how to get loader file

    Leave a comment:


  • reinaldkurt
    replied
    Hi Haizenberg, do you have the link for Android Tool v.2.51? Can’t find it here. Thank you!

    Leave a comment:


  • gefattern
    replied
    Originally posted by bibosbibos View Post


    Hello Gefattern!!
    Thanks for your post but everytime i try to load the loader on androidtool the app closes. Can you help me please?
    Hi ,

    Drivers installed ???

    did you check the Loader in Tool ???

    which ATool did you use ???

    what Loader did you use ???

    Maybe your Box has another Problem , which Box ???

    greetings / gefattern

    Leave a comment:


  • bibosbibos
    replied
    Originally posted by gefattern View Post

    Hi ,

    thanks for this , i make him sticky , better to find then ,

    greetings / gefattern

    Hello Gefattern!!
    Thanks for your post but everytime i try to load the loader on androidtool the app closes. Can you help me please?

    Leave a comment:


  • gefattern
    replied
    Originally posted by Haizenberg View Post
    Steps for repairing IDB failure are:

    1-use Andriodtool v 2.51 or higher
    2-you have to have a working loader (you can unpack any working rom using andriodtool by going to _Advanced Function_ and from here download a working firmware and unpack it by pressing unpack. Note, you can find the (loader) in (output folder created by Andriodtool).
    3-using Andriodtool, go to download tab and from there you can see (loader)(parameter) etc. jst focus on loader and upload that loader and put mark so that it can be flashed to your device.
    4-let Andriodtool reconized your device as Maskrom device.
    5-Finally, before hitting (Run), make sure you use tweezers or anything to to short circuit (GND and CLK inside the board) and hit run.
    6-The device will flash the loader into the board and you can now download a working rom for your device easily and get rid of IDB failure.

    Note, I need stock rom to unbrick my X88 Max plus, please if anyone can help me, I appreciated so much, please
    Hi ,

    thanks for this , i make him sticky , better to find then ,

    greetings / gefattern

    Leave a comment:


  • Haizenberg
    started a topic Fix IDB failure for RK devices

    Fix IDB failure for RK devices

    Steps for repairing IDB failure are:

    1-use Andriodtool v 2.51 or higher
    2-you have to have a working loader (you can unpack any working rom using andriodtool by going to _Advanced Function_ and from here download a working firmware and unpack it by pressing unpack. Note, you can find the (loader) in (output folder created by Andriodtool).
    3-using Andriodtool, go to download tab and from there you can see (loader)(parameter) etc. jst focus on loader and upload that loader and put mark so that it can be flashed to your device.
    4-let Andriodtool reconized your device as Maskrom device.
    5-Finally, before hitting (Run), make sure you use tweezers or anything to to short circuit (GND and CLK inside the board) and hit run.
    6-The device will flash the loader into the board and you can now download a working rom for your device easily and get rid of IDB failure.

    Note, If the above steps do not work with you, you can try :

    1- press the recovery button on the device and (hold it)
    2- Open Andriodtool 2.51 and upload a working firmware and hit (erase flash while holding the recovery button).
    3-If you do not succeed with andriodtool, you can use factory tool ( 1.6, 1.63, or any version)
    4- I hope this second method will work.
    Last edited by Haizenberg; 04-03-2020, 11:04.
Working...
X