H96 MAX Rk3566 4/32GB or 8/64GB Dual Wifi BT4.0 USB3.0 Gig Lan Google Voice Youtube Rockchip Android 11 Smart TV Box

[gefattern]

I have this device and I have three questions about it

1- How to Root it?
2- How to use remote control`s gyroscope instead of device sensor for gaming like as shown in the ad photo?
3- How to connect it remotely by anydesk or teamviewer software from PC. it stuck at connecting page. also there is no option for remember checkbox while pressing "Start Now" and it cause problem in connecting unattended.

thanks for help

Hi ,

is it not stock "rooted" ??? , better if possible to use Magisk for "root" ,

did you follow the steps discribed , look like it works over BT , so on the Box BT must turned ON , otherwise it wont work ,

the Games must support it too , like BeachBuggyRacing i think ,

for future , dont buy this shitty unsupported Boxes anymore , better look for a supported Box , Rom Updates / fixes / ....

from Devs or from Company ,

greetings / gefattern

[Mahdisj]

I have this device and I have three questions about it

1- How to Root it?
2- How to use remote control`s gyroscope instead of device sensor for gaming like as shown in the ad photo?
3- How to connect it remotely by anydesk or teamviewer software from PC. it stuck at connecting page. also there is no option for remember checkbox while pressing "Start Now" and it cause problem in connecting unattended.

thanks for help

[titanity]

Who needs the firmware? 20210413

I just got the Vontar KK MAX 4/32 from aliexpress. But it got ****ed up in the bootsession. Then i got a screen showing (pic1) and i tryed to reboot the ****er

It did´nt help much and was at the same spot again, so i tryed firmware data reset And also ran into the same fault (after some thinking time on the device)

But then i buttplugged it into recovery and saw the faults (pic2) . So i was clear about what to do next. Rockchip has quite alot options to write FW to the emmc device.

But the device is so brand new on the market that the FW (Firmware) isnt to be found AT ALL anywhere... What can i do to get past this problem? And what partition has the problem?

I could find a image from another device and unpack the FW into partitions and try to write the single partition... But hey i really need help on this guys... What to do and any help to get?

Info: They use aliexpress.com as their website... https://yojia.aliexpress.com/store/2...19ec233fy5iFES

They also got a totally fake website at http://www.vontar.cn/index.htm which has no link alive. Only 1 link to their profile on aliexpress and 2 chineese videoes from the 80s.

specs:




Features :


Hardware Specifications

Chipset

Rockchip RK3566 Quad-Core 64bit Cortex-A55

GPU

Mali-G52 2EE

FLASH

EMMC32GB/64GB/128GB (Optional)

SDRAM

4GB/8GB DDR4

Power
Supply Specifications

Power Supply

DC 5V/2A

Power Indicator (LED)

Power ON: Blue

Main Features

OS

Android 11.0

Support Decoder format

-H.265HEVC/MVC Main10 Profile [email protected] up to 4096x2304@60fps

-H.264 AVC/MVC Main10 Profile yuv400/yuv420/yuv422/@L5.1 up to 4096x2304@60fps-VP9 Profile0/2 [email protected] up to 4096x2304@60fps

-VP8 verision2,up to 1920x1088@60fps

-VC1 MPEG-4 MPEG-2 MPEG-1 up to 1920x1088@60fps

Support Media format

Avi/Ts/Vob/Mkv/Mov/ISO/wmv/asf/flv/dat/mpg/mpeg

Support Music format

MP3/WMA/AAC/WAV/OGG/DDP/HD/FLAC/APE

Support Photo format

HD JPEG/BMP/GIF/PNG/TIFF

HDR

HDR10 and HLG modes

USB

1x Type-A USB3.0, 1x Type-A USB2.0

Card reader

TF cards

HDD file system

FAT16/FAT32/NTFS

Support
Subtitle

SRT/SMI/SUB/SSA/IDX+USB

HD video output

4K (4096x2160 pixel )

OSD type of languages

English/French/German/Spanish/Italian/
etc multilateral languages

LAN

Ethernet:10/100M/1000MStandard RJ-45

Wireless

2.4&5GHz Dual-band Wifi, 802.11 a/b/g/n/ac

BT

V4.1

SPDIF/IEC958

Optical

Mouse/ Keyboard

Support mouse and keyboard via USB;Support 2.4GHz wireless mouse and keyboard via 2.4GHz USB dongle

HD

HD 2.0a for 4k@60Hz

AV

Support

Software Specifications

Network Function

RKMC 18.1, Vudu, Skype chatting, Picasa, Flicker, Youtube, Facebook, Online movies,etc

Other feature

Free Internet searching, thousands of android applications, many kinds of games, etc.

Certification

CE,FCC,ROHS

Accessories

Power adaptor, HD cable, User Manual, Remote Control

Option

Support mouse and keyboard via USB; Support 2.4GHz wireless mouse and keyboard via 2.4GHz USB dongle

[mo123]

Good choice.

[Sat-An]

I don't think HDMI CEC will ever work on this device.
For Kodi it won't work well, don't know about the crashes.

If you buy from China and pay with PayPal you can register for PayPal free return shipping.
I used it once and paid $20 shipping to China to send something back.
30 days later it arrived in China and I send the Post Office shipping invoice to PayPal, uploaded it on their site and they refunded me the whole shipping cost.

Better to get a Tox1 S903X or AM6 S922x that had 41 firmware updates and perfect video playback than be a beta tester for a device with all sorts of problems.

Since I will not wait for new updates of this f.. ing half product, I decided to buy a new box I chose between UGOOS AM6 Plus Smart Box S922X-J 4 + 32GB and Nvidia Shield Pro 2021 and opted for Nvidia Shield (not invented hot water again) the box has already been sent.

Cheers/ Sat-An

[bergamesk]

seems that a lot Boxes has it this CEC issue too
so,I always get it "OFF"

++

I did a list for the 3566 Boxes;if any more pls add!

-H96 MAX
-T95 Plus
-X88 Pro 2
-HK1 RBOX R2
-X96 X6

awaiting more

all are same Bugs,issues etc., like our previous RK3399 Boxes as well!
there is no firmware no support..... just they sold the Boxes and RUN!

for my opinion its not proper time to buy this new 3566 Boxes right now
or if you wanna to buy just to directly 922 or still 905X3 more right choice

[mo123]

I would be very grateful if someone who also has a H96 Max RK3566 box can confirm to me that Kodi works fine on this device. So at least I would know that the box has a factory defect and I would take it back to the store ??? or wait for a possible new FW update.

If the box has a defect I would most likely solve the problem with my huge hammer and trash can, because getting back to China is quite complicated (Customs, Export, Import).

Cheers / Sat-An

I don't think HDMI CEC will ever work on this device.
For Kodi it won't work well, don't know about the crashes.

If you buy from China and pay with PayPal you can register for PayPal free return shipping.
I used it once and paid $20 shipping to China to send something back.
30 days later it arrived in China and I send the Post Office shipping invoice to PayPal, uploaded it on their site and they refunded me the whole shipping cost.

Better to get a Tox1 S903X or AM6 S922x that had 41 firmware updates and perfect video playback than be a beta tester for a device with all sorts of problems.

[Sat-An]

I would be very grateful if someone who also has a H96 Max RK3566 box can confirm to me that Kodi works fine on this device. So at least I would know that the box has a factory defect and I would take it back to the store ??? or wait for a possible new FW update.

If the box has a defect I would most likely solve the problem with my huge hammer and trash can, because getting back to China is quite complicated (Customs, Export, Import).

Cheers / Sat-An

[Sat-An]

@ mitchell4you

I have already tried everything you wrote, but there have been no changes. Now I tried with the new FW (USB File because OTA doesn't work for me, it reports that I have the last FW), I think the FW is from May 14. 21. Kodi 19.1 with Xenon Matrix build the same problems, while with Kodi 18.9 Leia is a bit better, less crashing and resetting.
A new resolution of 3840x2160p30.00 has been added to the new FW.
HDMI-CEC is still missing.

Cheers/ Sat-An

[mitchell4you]

Try updating the box...maybe try another power supply... Sat-an
- brain says faulty power supply not enough amp, when you ask to much..it resets
If all fails...just return the unit ( aka start a RMA process with the store )

I did see the xenon build...and I was tempted to install it, but did not...but there where two version's firestick and 64bit shield tv
Maybe try it later..

As far I can see..you are the only one reporting issues relating to kodi..
looking at 3 forums and bunch of yt reviews...maybe you got a bad unit
-I watched 2 movies and 3season of anime...on kodi 18.9
- on a anime app using MX player some miner issues where video stutter sometimes in HW mode, but then works on HW+ mode?
--Weird but now it plays fine..yes im watching movie ( on h96 ) and making this post ( on a separate android box )

about compatibility... Yeah..lots of root related apps are not working on and11
-
Cheers

[bergamesk]

Sat-An

-I'v read your comments very carefully and its totally sucks

-your story same as my and some of users in Freaktab.... when we bought RK3399 Box(Brand "X99") KODI does not worked!
since about 5 years ago!

Those fuc.... RK devices are all same

note;after couple of updates etc., than Kodi will start!

and probably yours are also will start but when it will and what stable etc.,
pls be patient

-In the beginning do not install any "BUILD"!! just install 19.1 and wait

-other story ise,Android 10/11 and 9 ise fine but 10/11 have had lot of issues as well

I bought recently a new Box(A95X F4 with new chipset AML905X4) but it sucks too!
Android-10 does not work properly,some of Apk.s not compatible even lot of other issues too!!

[Sat-An]

I have just bought a new Android TV Box model 2021, H 96 Max RK3566 4/32( Android 11) and installed the KODI app and the corresponding build on. I immediately noticed that the box has a big problem with this app and when I run the KODI app KODI loads and after a few seconds it resets and returns the screen to the basic default screen, sometimes it completely reset the box and restarts the box again. After many attempts, I sometimes manage to make KODI work normally until I turn the box off, after a new activation on, the same problems occur. Is there any way to fix this problem?
I tried 18.9 Leia with No Limits Magic build and 19.1 Matrix with Xenon Matrix build, and always exactly the same problem.
Kodi works for you on RK3566 ???, if so then something is wrong with my box maybe HW memory I don't know I guess?
I also can't believe that the box in the basic Android settings doesn't have Power Key and HDMI-CEC definition options.
Any advice would be welcome.

Best Regards / Sat-An

[mitchell4you]

mo123 You can already flash the boot.img from Developer Options, no PC needed.
please clarify how?
Because... I lost root again after installing update.zip dated 5-20
- installed update all seems fine

Only thing I see in developer mode is dynamic update
It gives me : GSI arm64 and GSI+GMS
I clicked on first...let's see what it does

looks like trwp is under development
https://twrpbuilder.github.io/downlo...p/#tab=inQueue

Cheers

[mitchell4you]

Hi Guys ,

small Hint , User Mo123 made a good TV based Launcher with all needs ,

a try worth to support him ,

greetings / gefattern

Well..see..my post in his thread...some android 11 issues with that launcher
--------
on 4pda.ru the seem to have a new patch dated 5-20 for 8gb version

https://disk.yandex.ru/d/lk9WJq-HawJn9g

I will look for a soldering iron..tomorrow to see if the sd slot can be used
-downloaded twisteros...made a dtb file..will it boot?

Cheers

[gefattern]

Hi Guys ,

small Hint , User Mo123 made a good TV based Launcher with all needs ,

a try worth to support him ,

greetings / gefattern