Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Tronsmart Vega s89 Standard/Elite FAQ - READ THIS FIRST

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    I think android devices run into licencing issues similar to Ouya and pivos xios, the Pivos had provided HD DTS and TrueHD Passthrough once Linux was installed on it

    so our best chance to get DTS HD and TrueHD on our devices is to get linux on them

    I have a small linux knowledge but willing to help anyway needed to build this
    Last edited by papampi; 03 June 2014, 17:59.
    Proud xbmp>xbmc>kodi user since early days of 1st gen xbox
    XBMC on :
    Tronsmart S89 Quad Core - Openelec
    Atv1 + Crystall HD - Crystalbuntu
    Raspberry Pi - Openelec
    Xios DS - Linux the-hydra
    1st gen xbox, JB Atv2, Ouya, ...

    Comment


      ADB (Android Debug Bridge)

      Enable ADB (Android Debug Bridge):

      a. Settings
      -> [Others]
      -> [More Settings]
      -> [SYSTEM / About MediaBox]

      b. Click as often as need at [Build Number]

      c. Leave [More Settings] and go back to [More Settings]
      -> [SYSTEM / Developer options]
      -> [DEBUGGING / USB debugging]

      d. Plug in OTG (windows recognize a new device -> cancel driver setup)

      e. Download and Install MoboRobo http://www.moborobo.com

      f. At device at TV you will see a message "Allow USB debugging?"
      => Check "Always allow from this computer" and press [OK]

      g. Download and Install 'ADB, Fastboot and Drivers - 15 seconds ADB Installer'

      BTW: I unpack the .exe with WinRAR into a directory I like and use it at subdir adb...

      h. Test adb with 'adb devices' -> "12345678900 unauthorized"

      i. At device at TV you will see a message "Allow USB debugging?"
      => Check "Always allow from this computer" and press [OK]

      j. Test adb with 'adb devices' -> "12345678900 device"

      k. Because I don't need MoboRobo, I uninstall it (but keep the drivers ) ...
      RK3288 Devices
      - Overview BOX (LINK !)
      - Overview STICK (Dongle) (LINK !)

      MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
      UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
      Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
      Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

      RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
      Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

      Comment


        The S89 still freeze after few minutes



        Originally posted by HelpMePlz View Post
        Has anyone had problems with the media player as well or is this a isolated incident?


        Hi,
        I have the devise more than a week and I didn't see one Movie or TV series.
        I faced with 2 cases: 1. com.android.system problem(Solved). 2.
        Very High problem: The S89 freeze\Stuck after few minutes, Only 10 sec Power reset the devise.
        .


        I installed the 104k and 1.6 ROM but I still have the Freeze issue.


        Do anyone have any solution?

        Comment


          Originally posted by korenspeed View Post




          Hi,
          I have the devise more than a week and I didn't see one Movie or TV series.
          I faced with 2 cases: 1. com.android.system problem(Solved). 2.
          Very High problem: The S89 freeze\Stuck after few minutes, Only 10 sec Power reset the devise.
          .


          I installed the 104k and 1.6 ROM but I still have the Freeze issue.


          Do anyone have any solution?
          Could be heat related. Some devices are not assembled so well. Missing thermal pads between cpu & heatsink etc. Try to monitor with cpu temp app to see if this is the case. Your case is isolated feom what I've seen so far

          Comment


            Originally posted by korenspeed View Post




            Hi,
            I have the devise more than a week and I didn't see one Movie or TV series.
            I faced with 2 cases: 1. com.android.system problem(Solved). 2.
            Very High problem: The S89 freeze\Stuck after few minutes, Only 10 sec Power reset the devise.
            .


            I installed the 104k and 1.6 ROM but I still have the Freeze issue.


            Do anyone have any solution?
            How hot is it where you keep your device ?

            Comment


              Originally posted by noderat View Post
              Is there a remote app for my phone?

              NEW
              You can follow these instructions to make your Vega IR receiver work for any remote. This is very, very handy as I like to have my air mouse separate from my media center remote.
              Hoping someone can help!
              What are "these" instructions? Are there any guides to get a Harmony working with my S89-H. Will it work with the Harmony emulating a MCE remote for XBMC?

              Appreciate any help...

              Comment


                XBMC is the reason for stuck?

                Originally posted by Lokie View Post
                Could be heat related. Some devices are not assembled so well. Missing thermal pads between cpu & heatsink etc. Try to monitor with cpu temp app to see if this is the case. Your case is isolated feom what I've seen so far
                Hi All,
                I suspect the XBMC is the problem.

                I tries the Antutu-x and got 16230 score- Is it Ok?
                Most of the freezing are done when I use the XBMC SW
                .

                In addition I add a Fan under the devise for cooling
                I don't want to uninstall it before i get any answer from the team members.
                TNX

                Comment


                  Originally posted by korenspeed View Post
                  Hi All,
                  I suspect the XBMC is the problem.

                  I tries the Antutu-x and got 16230 score- Is it Ok?
                  Most of the freezing are done when I use the XBMC SW
                  .

                  In addition I add a Fan under the devise for cooling
                  I don't want to uninstall it before i get any answer from the team members.
                  TNX
                  No its about half the speed you should have for a cool system. This indicates that your CPU already whent through a throtteling trip point. This is set at 60degC, 65degC & 70degC which systematically takes down your CPU speed in the efort to cool it down. If you somewhat tecnical you could just open the unit and use some thermal compound between your heatsink and CPU to fix this problem. Search the forum, this has been dicussed lots. There are some modders here that goes to extremes to keep the CPU from throtteling

                  here : http://www.freaktab.com/showthread.p...ontrol-patcher

                  Comment


                    Antutu-X score on a well-cooled box with non-throttling CPU is about 23500.
                    32000 is cheated Antutu score...

                    Comment


                      Originally posted by Lokie View Post
                      No its about half the speed you should have for a cool system. This indicates that your CPU already whent through a throtteling trip point. This is set at 60degC, 65degC & 70degC which systematically takes down your CPU speed in the efort to cool it down. If you somewhat tecnical you could just open the unit and use some thermal compound between your heatsink and CPU to fix this problem. Search the forum, this has been dicussed lots. There are some modders here that goes to extremes to keep the CPU from throtteling here : http://www.freaktab.com/showthread.p...ontrol-patcher
                      I can open it, drill it, add a thermal pad ETC..
                      You don’t think I need to try to return iy to the store.
                      You believe the cooling issue will solve the Freeze problem?
                      Can I see IN Antutu the Inside Temp of the devise?
                      Last edited by korenspeed; 05 June 2014, 17:39.

                      Comment


                        Originally posted by korenspeed View Post
                        I can open it, drill it, add a thermal pad ETC..
                        You don’t think I need to try to return iy to the store.
                        You believe the cooling issue will solve the Freeze problem?
                        I can I see I Antutu the Inside Temp of the devise?
                        I can't promise you anything (it like investing in shares) but I think it worth a try.
                        Here are some apps to help you identify the prob before you go through all the effort.


                        Comment


                          Re: Tronsmart Vega s89 Standard/Elite FAQ - READ THIS FIRST

                          Originally posted by spot0915 View Post
                          Same here....same question....

                          I only have "android, audiotrack" available at the "Audio output device" option....maybe that´s the problem...
                          This is the correct setting. 5.1 audio will work through this device but not 7.1. Make sure you have DTS and DD enabled.

                          Sent from my mobile device. Please excuse any typos.


                          Only after you've donated to Finless and Neomode are you allowed to donate here.

                          Comment


                            Originally posted by Lokie View Post
                            I can't promise you anything (it like investing in shares) but I think it worth a try.
                            Here are some apps to help you identify the prob before you go through all the effort.


                            https://play.google.com/store/apps/d...into.stability
                            Attention
                            !!! Guys, handle 'StabilityTest (ROOT optional)' with care, really with care, it's like a bomb to your devices with continues CPU usage at 100%... !!!
                            Try at first step 'CPU Benchmark' because it's smooth stresses your system at ~40% CPU usage


                            BTW:
                            My first tries with 'CPU Monitor' (and I really like it) at this device looks like that it not work correctly because I get often only 2 cores at curve instead of maybe showing 3 cores using at 'System Tuner Pro'
                            RK3288 Devices
                            - Overview BOX (LINK !)
                            - Overview STICK (Dongle) (LINK !)

                            MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
                            UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
                            Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
                            Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

                            RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
                            Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

                            Comment


                              Originally posted by noderat View Post
                              This is the correct setting. 5.1 audio will work through this device but not 7.1. Make sure you have DTS and DD enabled.

                              Sent from my mobile device. Please excuse any typos.
                              yes, DTS and DD is enabled and I got these signals on my AVR correct.
                              However Geekbuying is reporting in their blog that DTS HD is working as well and I don´t have these options and it´s not working for me...my AVR doesn´t get a DTS HD signal....

                              See:

                              Comment


                                Originally posted by spot0915 View Post
                                yes, DTS and DD is enabled and I got these signals on my AVR correct.
                                However Geekbuying is reporting in their blog that DTS HD is working as well and I don´t have these options and it´s not working for me...my AVR doesn´t get a DTS HD signal....

                                See:
                                http://blog.geekbuying.com/index.php.../#.U5GEs7RkyMU
                                Dont think any xbmc on android can pass through True-HD and DTS-HD audio signals
                                Proud xbmp>xbmc>kodi user since early days of 1st gen xbox
                                XBMC on :
                                Tronsmart S89 Quad Core - Openelec
                                Atv1 + Crystall HD - Crystalbuntu
                                Raspberry Pi - Openelec
                                Xios DS - Linux the-hydra
                                1st gen xbox, JB Atv2, Ouya, ...

                                Comment

                                Working...
                                X