Kit Kat 4.4.2 RK3066 (Fully Working)

[sviet2k]

Thanks Shomari for sharing this excellent ROM.
I just upgraded my UG007II from Finless ROM to this Kitkat rom.
Everything works well. WIFI is very stable and has high performance.
But there is only one problem: No audio in all mode.
I guess that the kernel does not support my Audio chip.

Does anybody else encounter the same problem or have a solution for me?

Thanks in advance for your help,
sviet

[reddragon72]

For those that are trying to move the NAND and SDCARD around you cannot.

I did however make progress on that front.

go back to page 11 and start reading all my posts and you will see that I am now sitting with an 8gig SDcard containing the installed apps extra stuff and the NAND sitting at 6gb for app installation.

The only item I could not figure out with the .android security crap. No matter what I changed apps that require security still install to the NAND.

I stopped trying after a bit as none of the apps I was downloading where going to the directory.

I have since rearranged the SDcard and now have all my apps installing to a 740gig USB driver connected to a hub. but that is only the extra downloads the primary portion of the app still installs to the NAND but it is not 6gb instead of 2.

remember to read and read some more!

[Shomari]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

Thanks Shomari for sharing this excellent ROM.
I just upgraded my UG007II from Finless ROM to this Kitkat rom.
Everything works well. WIFI is very stable and has high performance.
But there is only one problem: No audio in all mode.
I guess that the kernel does not support my Audio chip.

Does anybody else encounter the same problem or have a solution for me?

Thanks in advance for your help,
sviet

You have the bad luck of having one of the devices with the severe audio bug. It's a problem with the kernel, read a few pages back it was discussed in depth.

Sorry you have no sound. I still have one tv stick with the same problem; luckily all my others work fine with this ROM.

[musarezeq]

For those that are trying to move the NAND and SDCARD around you cannot.

I stopped trying after a bit as none of the apps I was downloading where going to the directory.

remember to read and read some more!

At all, thank you Mr. reddragon72 !
But I am really read all your posts before I wrote my request and were valuable for me!
But because I feel that you giving up from trying and because I read a solved such a problem in an other thread ( http://www.freaktab.com/showthread.p...mp-External-SD )
So, I "decid" to asked such a question!
Now, surly, and unfortunately, I will switch back to the finless 1.7a because my usage for the stick is mainly for gaming and I am really want a huge size of memory space for that and I tried folder mount application for moving data to my hard desk but it didn't work!

Thank you for this nice ROM
( Just a note: in this kit Kat ROM when I wake up the device from a sleep, there is no sound at all! I have to reboot to make sound come back again)

[Shomari]

Re: Kit Kat 4.4.2 RK3066 (Fully Working)

Thank you for this nice ROM
( Just a note: in this kit Kat ROM when I wake up the device from a sleep, there is no sound at all! I have to reboot to make sound come back again)

...it's a known bug in the kit kat kernel. To keep audio when resuming from sleep, turn the device on first, before turning on tv. Resume the device before powering on the tv and sound will be available.

[Lokotito]

I try this rom with my original MK808b (RK3066 chip, WF/BT RK903) but after flash room with Rockchip batch tool v1.7, boot ok but have a blinking screen with an small android in upper left corner (I think the initial setup screnn).
I try with Androidtool v2.1, erashing flash and upgrade the room, but same blinking screen after boot.
In bot cases I can enter into the settings and WiFi is disabled and NO bt by the way. There is no way that I can check any other thing because the blinkng screen.

Flashed BalintBanyasz KERNEL (http://www.freaktab.com/showthread.p...l=1#post214775), now boot OK, I can enable WiFi but the performance sucks (almos 5.000 lees in antutu).

Anybody have succes installing in MK808b the 4.4.2 room ???? (RK3066 chip, WF/BT RK903)

There is another room that I can try ???

Best regards.

[juliowa]

MUCHAS GRACIAS

From Argentina, thank you very much.
I have a J21 with RK3066 and your ROM runs perfect.
I do ROOT cost, but with patience I could do it.
Apply KINGO with the device connected to the tv and I did.
Congratulations and thank you very much from here by aporte.-

[jockyw2001]

Hi Shomari, thanks for your great work and support. I flashed your rom and oc kernel on a genuine MK808 and connected a usb ethernet dongle. It boots just fine, the only problem is the ethernet dongle doesn't work. In the settings it shows the correct mac address, but it won't get an IP from my dhcp server. I also tried a static IP, but in network status it shows unknown network. Could it be the kernel was not compiled for popular usb ethernet dongles? Mine is an Edimax EU-4208 which has an ASIX AX88772B chipset.

EDIT1: When using an ethernet usb dongle one must replug the ethernet cable in order to get a valid IP when dongle connected to standard size USB. If dongle connected to OTG port at the side it will automatically get an IP

EDIT2: the 1920x1080 screen resolution doesn't work with a MK808 (which could be expected I think)

EDIT3: Antutu score is 14889 (1280x720)

[digger]

EDIT2: the 1920x1080 screen resolution doesn't work with a MK808 (which could be expected I think)

Try to read here

http://www.freaktab.com/showthread.php?14765-Kit-Kat-4-4-2-RK3066-(Fully-Working)&p=199394&viewfull=1#post199394

[jockyw2001]

Try to read here
http://www.freaktab.com/showthread.p...l=1#post199394

Gotcha, thanks!

Btw, installed the rom on my MK802IIIS and get a 17283 score in Antutu !

[chsmith1976]

CWM: Download Arctools https://mega.co.nz/#!zNpiSTZB!DIy4BR...aHVlfLfglAWA8I and select (OMA / CrewRKTablets) CWM Recovery 6.0.3.1 for Android 4.4.2 KitKat on RK tablets (loader Gen2) in packages. Download and install, reboot. You must select the Oma package for full CWM compatibility.

Flashed the OMA CWM on my MK809II, but now I'm stuck in a bootloop into recovery, can't get back to Android, can't backup my current ROM, device not detected in Finless Bob's flash tool, adb inaccessible - total disaster. Any help would be greatly appreciated.

BTW, CWM can't mount anything, hence my apparent lack of options.

[acer09]

Sorry let me be more specific I am flashing this kernel Overclocked Kernel - 1080p (try at your own risk - CPU 1608/GPU 400/DDR 600):https://mega.co.nz/#!6N5RVIBD!48i4hG...g85DAQ7LYSUahE and it is doing nothing although it is flashing properly every time with cwm and pc flash tool. Thanks.

Hi,

can I have a link that works?

thanks

[virtualpurple]

I've been a little out of the game since flashing one of bob's mods last year sometime.

I am using a Imito Mx2, and for the life of me I cannot figure out how to flash this stuff. I have downloaded kitkat from the first post on the forum, I also have rockchip 1.7 and 2.1

However, from here I keep running into dead ends. Can anyone link me to the flashing method for the mx2?

[virtualpurple]

So strange, I've tried everything I could think of to try and get the imito mx2 into flash mode. I have attempted using Bob's Finless tool for flashing, as well as both the rockchip 1.7 and 2.1. Whenever I try and switch mode to get into flash mode I lose my device entirely, and it isn't recognized again unless I unplug power and then plug back in.

I also constantly get the message "match device type failed! Stop running!" constantly, although rockchip 2.1 says "found one MSC Device".

I have also tried to manually set the Mx2 into flash mode by holding the reset button with a paperclip while plugging the device in. Whenever that happens I get the same result as switching modes. Device is no longer recognized (with 2 different computers) and it will not get recognized again until I cut off and resupply power.

Has anyone got suggestions? It seems I have made far and away the least amount of progress.

Also it appears my device is being mistaken for a samsung galaxy s2 in kingo root...odd.

Thanks,

VP

[mystguy]

just make sure that u r using usb 2.0 port on your computer... usb 3.0 is not recognized